• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.569-576
• /
• 2017

The electromagnetic valve of pneumatic doors of EMUs has a high failure rate due to air leakage because it supplies air on and off to operate the doors repeatedly. The electromagnetic valve is a very important safety component for which a very high reliability is required because failure makes it impossible to operate the passenger cars. However, domestic urban railway operators maintain electronic valves of the EMU door under a fixed cycle with a spare period according to the full overhaul cycle of the EMU. An improvement of the current maintenance cycle was suggested based on the reliability function and mission reliability. Using the statistical program MINITAB for the operational data of EMU line 6, we analyzed the characteristics of the fault distribution and derived the shape and scale parameters of the reliability function. If we limit the specific reliability probability to under a certain failure rate and calculate its statistical parameters, we can calculate the allowable inspection period with mission reliability. Through this study, we suggested a maintenance period based on RCM (reliability centered-maintenance) to improve the reliability of electromagnetic valves from 68% to 95%.

• Journal of Applied Reliability
• /
• v.17 no.1
• /
• pp.28-37
• /
• 2017

Purpose: This paper proposes a procedure that may infer and identify interaction failures in a module. Methods: In design FMEA, we defined an interaction model between components and proposed a method for selecting a single component by using the standard specification classification table and four methods for choosing the related components. We also introduced the function tree for function and requirement characteristic analysis and proposed utilization of standard stress lists and 1st and 2nd stress analysis tables to determine the effect the stress analysis has on interactions. Finally, the interaction mechanism diagram was proposed and used to infer the failure mechanism. Process FMEA also established procedures in a similar way. Results: We established a procedure for predicting the failure mode due to interaction between components based on Company A's multi-step FMEA procedure. Conclusion: By applying the proposed interaction FMEA procedure to the development model, we were able to confirm the effect of the new derivation on the failure mode of interaction, which was not predicted by the existing FMEA.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.12
• /
• pp.63-72
• /
• 2018

Purpose - In this study, it is classified the service quality dimension of mobile shopping app using Kano model. In addition, it is evaluated quality factors suitable for strategic management from the viewpoint of service provider through mobile application through binary dimension analysis. Research design, data, and methodology - In this study, seven quality dimensions such as information quality, reliability, immediacy, convenience, design, security and customer service were derived through related studies to make binary shopping quality app quality measurement. 37 sub-variables were set by each quality dimensions. Each questionnaire was composed of positive and negative items like Kano's proposed method, and the satisfaction coefficient suggested by Timko(1993) was examined to understand the influence of each factors on customer satisfaction. Results - As a result of research, shopping app users perceived unity quality factor in most items of service quality dimension such as information quality, reliability, immediacy, convenience and customer service. In addition, the satisfaction coefficient showed a good impression, quick response of the result, fast delivery, and the unsatisfactory coefficient showed more interest in personal information such as payment method safety, and transaction security. As a result of research, shopping app users perceived unity quality factor in most items of service quality dimension such as information quality, reliability, immediacy, convenience and customer service. And, in information quality, the information overload was classified as an apathetic quality component, while the related information provision belonged to an attractive quality component. In reliability quality, customized service provision was classified as an attractive quality component. In instant connectivity, the quality of the connection during transport was classified as an attractive quality component. In convenience quality, access to product information was classified as a one-way quality component. All components of designs quality were classified as attractive quality components, and in security quality, all of their components were all classified as one quality component. Lastly, in customer service, they components were all classified as a single quality component. In addition, the satisfaction coefficient showed a good impression, quick response of the result, fast delivery, and the unsatisfactory coefficient showed more interest in personal information such as payment method safety, and transaction security. Conclusion - In the online service environment, which is difficult to differentiate in terms of upward upgrading only by technological implementation and function, the results of this study can be suggested as a differentiating factor for major channels with customers rather than improve the brand image.

• Structural Engineering and Mechanics
• /
• v.65 no.6
• /
• pp.751-760
• /
• 2018

Damages in concrete structures due to aging and other factors could be a serious and immense matter. Making the best selection of the most viable and practical repairing and strengthening techniques are relatively difficult tasks using traditional methods of structural analyses. This is due to the fact that the traditional methods used for assessing aging structure are not fully capable when considering the randomness in strength, loads and cost. This paper presents a reliability-based methodology for assessing reinforced concrete members. The methodology of this study is based on probabilistic analysis, using statistics of the random variables in the performance function equations. Principles of reliability updating are used in the assessment process, as new information is taken into account and combined with prior probabilistic models. The methodology can result in a reliability index ${\beta}$ that can be used to assess the structural component by comparing its value with a standard value. In addition, these methods result in partial safety factor values that can be used for the purpose of strengthening the R/C elements of the existing structure. Calculations and computations of the reliability indices and the partial safety factors values are conducted using the First-order Reliability Method and Monte Carlo simulation.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.701-721
• /
• 2016

Base isolation is a well-established passive strategy for seismic response control of buildings. In this paper, an efficient framework is proposed for reliability-based design optimization (RBDO) of isolated buildings subjected to uncertain earthquakes. The framework uses reduced function evaluations method, as an efficient tool for structural reliability analysis, and an efficient optimization algorithm for optimal structural design. The probability of failure is calculated considering excessive base displacement, superstructure inter-storey drifts, member stress ratios and absolute accelerations of floors of the isolated building as failure events. The behavior of rubber bearing isolators is modeled using nonlinear hysteretic model and the variability of future earthquakes is modeled by applying a probabilistic approach. The effects of pulse component of stochastic near-fault ground motions, fixity-factor of semi-rigid beam-to-column connections, values of isolator parameters, earthquake magnitude and epicentral distance on the performance and safety of semi-rigidly connected base-isolated steel framed buildings are studied. Suitable RBDO examples are solved to illustrate the results of investigations.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.8-15
• /
• 2012

The GO-FLOW methodology is capable of assessing system reliability. It models the system into a GO-FLOW chart with signal lines and operators and assesses the reliability of system by assessing the GO-FLOW chart sequential. But, as it models one component of system into several operators, the GO-FLOW chart which is different from the system flow diagram be modeled. Also, as it models the real operation time into "time point", it is hard to assess the reliability change according to the real operation time. Therefore, in this paper, the new GO-FLOW methodology which use the function(success/failure) of system components has been developed. It can assess the successful operating probability of system, regardless of the operating status of components. As it models one component of system into one operator, the GO-FLOW chart which is similar the system flow diagram can be modeled. Also, it is able to easily assess the successful probability of system according to the real operation time using the time in the operators.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.697-703
• /
• 2018

In this paper, we analyzed the operation of the ignition circuit for electronic arm and fire device(EAFD), and investigated the sensitive elements of the circuit system. For reliability analysis, the EAFD ignition circuit was modeled using the PSpice simulation tool, and the output results of the circuit were examined by changing the tolerance of each circuit element. Monte Carlo simulation was used by maintaining the values of the observed sensitive elements at ${\pm}10%$ of the original values and adjusting the values of the other components according to a random distribution. The histogram results of the output peak currents and pulse widths were represented by Weibull and Burr type XII function fittings in three cases(element values are +10 %, 0 %, -10 % of original). For the output peak currents, mean values were 1.0028, 1.0034, and 1.0050, where the variance values were calculated as 0.0398, 0.0396, and 0.0290 using the Weibull function fitting, respectively. For pulse widths, the mean values of 0.9475, 0.9907, and 1.0293 with the variance values of 0.0260, 0.0251, and 0.0238 were obtained using the Burr Type XII function fittings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.595-603
• /
• 1992

It has been establisued that the reliability of communication networks is NP hard problem owing to computationally and complexity as the number of componeuts is Increased in large networks. This paper proposed an algorithm for determining upper and lower bounds In the reliability of source-to-terminal in communication networks to solve this problem. The evaluation method follows the next procedures. First, minimal pathset and minimal cut set are serched. Second, it is sorted that the number of components is the same events and the reliability bounds Is evaluated by the section function to extract common variable. The performance of proposed algorithm is also estimate(1 as compared to the reliability of Esary-Proschan, Shogan and Copal.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.145-150
• /
• 2003

Reliability, availability, and cost have been the major concerns for photovoltaic hybrid systems since their beginning as primary sources for much critical applications like communication units and repeaters. This paper descnbes the performance of two hybrid systems, photovoltaic-battery, wind-turbine coupled with the public-grid (PVBWG) hybrid system and photovoltaic-battery, wind-turbine coupled With the diesel generator (PVBWD) hybrid system The systems are sized to power a typical 300W/48V de telecommunication load continuously throughout the year Such hybrid systems consist of subsystems, which in turn consist of components Failure of anyone of these components may cause failure of the entire system. The reliability and availability basics, and estimation procedure for the two proposals are introduced also in this paper. The PVBWG and PVBWD system configurations are shown with the relevant mean-time-between-faIlure (MTBF) and failure rate (${\lambda}$) of each component. The characteristics equations of the two systems are deduced as a function of operating hours and the percentage of sun and wind availabilities per day. The system probability failure as well as the reliability is estimated based on the fault tree analysis technique. The results show that, by using standard or normal components MTBF, the PVBWG is more reliable and the time of periodic maintenance period is more than one year especially in the rich sites of both sun and wind, but PVBWD competes else Also, in the first five years from the system installation, the system is quit reliable and may not require any maintenance. The results show also, as the sun and wind are available, as the system reliable and available.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1496-1504
• /
• 2004

Web service should be to connect business between enterprise through the Internet, promotion of construction speed and decrease of development expense of service construction are possible. Also, unification with other domain is possible easily, and update or correction is easy by offering reusability and replaceability through component based development. In this paper, We suggest development process to build architecture and this to integrate consisted component efficiently to develop web service that is embodied in supplier side on service oriented architecture(SOA). The suggest architecture to integrate component that is consisted for this efficiently, and describes development process. So that component develops web service to base structure of web service because do command stratification logically function in each hierarchy define, and presents architecture based on logical hierarchy. The web services consist of Facade and Backside component; The Facade component have web service functions. We describe process that develop to Facade component and present mailing web services as case study. It can be decrease production cost and development time. The web service based on component will improve reliability for reuseability and replaceability.