• Journal of Society of Preventive Korean Medicine
• /
• v.27 no.1
• /
• pp.89-98
• /
• 2023

Objectives : This study collected sleep information by wearable device in the Korean medicine Daejeon citizen cohort (KDCC). It was measured based on the sleep record information measured by wearing a Fitbit, and the possibility of clinical use was examined for compliance with objective sleep collection. Based on compliance, the possibility of clinical use was examined. Methods : After surveying personal information and PSQI(Pittsburgh Sleep Quality Index), sleep information was collected by Fitbit for 14 days. Compliance was measured based on sleep record information by Fitbit. Compliance was analyzed by sex, age, BMI(Body Mass Index), and sleep group(deep/poor). Results : The number of participants was 730, and the compliance was 94.3%, and the compliance group was 675(92.5%). The age of the participants varied from 30 to 60 years old, and the average age was 46±6.7 years. There were 218 males and 512 females. Young people have high compliance. Males are more compliance than females. As the BMI score decreased in the 30s, the compliance was higher. The underweight group in all age groups had 100 compliance. The underweight group was all female. The low compliance groups were that 30 years males (obesity level2), 50 years females (overweight group), and 50 years females (obesity level2). There was no significant difference in compliance between deep sleep group and poor sleep group. In deep sleep group, females showed higher compliance. In poor sleep group, males showed higher compliance. The average duration of Fitbit usage among participants was 20.1 days. The compliant group wore the device for an average of 21.3 days, while the non-compliant group wore it for only 5.2 days. Of the compliant group, 86.9% (73.8% of all participants) continued to wear the Fitbit after the recommended 14-day period, and 50.8% wore it for more than 20 days. Conclusions : This study showed the possibility of adaptation for wearing a Fitbit for collecting objective sleep information. It is judged that the compliance is high because it was worn for more than 13.2 days out of the 14 days required. It is considered meaningful because the compliance was measured based on the sleep information by Fitbit, not the questionnaire. As the data on objective sleep time is collected automatically, we believe that the burden on participants after the study period is not significant for a certain period. Compliance may be even higher for cohorts related to illnesses and with doctor's orders, rather than for the general population.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.413-415
• /
• 2019

In this paper, we develop IoT-HiAS(IoT-Human Interactive Advertising Service) for sharing economy. The HiAS device shooting the front of the device via a webcam and recognizes the person in real time through the SSD model using MobileNet. If the number of persons above the set threshold is recognized by counting the recognized person, the advertisement is reproduced on the idle resource through the beam projector. At the same time as the advertisement is reproduced, the captured image of the advertisement start time in the front of the device and the number of recognized persons are sends the IoT server of an oneM2M-compliant HiAS server using the IoT client. When the advertisement is finish, the webcam is shooting the front of the device and the image is sends the IoT server. We implemented the IoT-based human interactive advertising service by transmitting the received data to the advertiser and the advertising producers through the SNS(Social Network Service) agent of the HiAS server.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.293-296
• /
• 2012

SOC test methodology in ultra deep submicron (UDSM) technology with reasonable test time and cost has begun to satisfy high quality and reliability of the product. A novel hierarchical test architecture using IEEE standard 1149.1, 1149.7 and 1500 compliant facilities is proposed for the purpose of supporting flexible test environment to ensure SOC test methodology. Each embedded core in a system-on- a-chip (SOC) is controlled by test access ports (TAP) and TAP controller of IEEE standard 1149.1 as well as tested using IEEE standard 1500. An SOC device including TAPed cores is hierarchically organized by IEEE standard 1149.7 in wafer and chip level. As a result, it is possible to select/deselect all cores embedded in an SOC flexibly and reduce test cost dramatically using star scan topology.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.142-148
• /
• 2014

The mirror which is considered in designing a MFD is off-axis primary one and its dimension is wide 556mm height 345mm. The MFD(Mirror Fixation Device) load specification is generated for the high resolution mirror. The optical WFEs for unit loads are calculated from mirror sensitivity analysis and they are compared with allocated allowable optical WFE. The parasite load for the MFD is calculated from their comparison. The MFD compliant with the parasite load is designed.

• Advances in robotics research
• /
• v.1 no.1
• /
• pp.1-19
• /
• 2014

Microgripper is an essential device in the micro-operation system. It can convert other types of energy into mechanical energy and produce clamp movement with required chucking force, which enables it a broad application prospect in the domain of tiny components' processing and assembly, biomedicine and optics, etc. The performance of a microgripper is dependent on its power supply, type of drive, mechanism structure, sensing components, and controller. This paper presents a state-of-the-art survey of recent development on flexure-based microgrippers. According to the drive type, the existing microgrippers can be mainly classified as electrostatic microgripper, electrothermal microgripper, electromagnetic microgripper, piezoelectric microgripper, and shape memory alloy microgripper. Additionally, some different mechanisms, sensors, and control methods that are used in microgripper system are reviewed. The key issue of how to choose those components in microgripper system design is also addressed.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.355-358
• /
• 2008

In the current GPON market and standard, the line bit rate requirement is changing from 1.25 Gbps to 2.5 Gbps. We fabricate a 2.5 Gbps burst-mode receiver with commercially available blocks and optimize it with an APD bias control. A burst-mode measurement setup is made for the full compliance test with the GPON standard. The device meets the partially defined 2.5 Gbps specs in the current ITU G.984.2 standard, also, supports 1.25 Gbps specs for the coexistence issue in an access network. The full-compliant measurement values can be used as a guideline for fixing "for further study" specs in the current GPON standard at 2.5 Gbps.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1287-1295
• /
• 2015

Recently, fieldbus communication technologies have been widely deployed for industrial automation because they are profitable in providing easy system integration and management for multiple devices, as well as high-speed communication. It is essential for smart encoders to support fieldbus connectivity, where the device configuration and various types of information related to position are exchanged between an external controller and multiple encoders over the communication link. In this study, we implemented the CiA 406 device profile for smart encoders from the CANopen standards by extending an open-source CANopen standard-compliant framework, called CanFestival. The CiA 406 functionalities implemented in this study were validated on a test-bed consisting of a CANopen master and virtual CANopen encoders with our CiA 406 extension module.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.417-424
• /
• 2019

This paper presents the design of a JPEG-LS codec for lossless image compression from AR/VR device. The proposed JPEG-LS(: LosSless) codec is mainly composed of a context modeling block, a context update block, a pixel prediction block, a prediction error coding block, a data packetizer block, and a memory block. All operations are organized in a fully pipelined architecture for real time image processing and the LOCO-I compression algorithm using improved 2D approach to compliant with the SBT coding. Compared with a similar study in JPEG-LS, the Block-RAM size of proposed STB-FLC architecture is reduced to 1/3 compact and the parallel design of the predication block could improved the processing speed.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1464-1474
• /
• 2012

In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.