• International Journal of Railway
• /
• v.2 no.3
• /
• pp.124-126
• /
• 2009

Energy savings can be achieved with optimum energy consumptions, brake energy regeneration, efficient energy storage (onboard, line side), and primarily with light weight vehicles. Over the last few years, the rolling stock industry has experienced a marked increase in eco-awareness and needs for lower life cycle energy consumption costs. For rolling stock vehicle designers and engineers, weight has always been a critical design parameter. It is often specified directly or indirectly as contractual requirements. These requirements are usually expressed in terms of specified axle load limits, braking deceleration levels and/or demands for optimum energy consumptions. The contractual requirements for lower weights are becoming increasingly more stringent. Light weight vehicles with optimized strength to weight ratios are achievable through proven design processes. The primary driving processes consist of: $\bullet$ material selection to best contribute to the intended functionality and performance $\bullet$ design and design optimization to secure the intended functionality and performance $\bullet$ weight control processes to deliver the intended functionality and performance Aluminium has become the material of choice for modern light weight bodyshells. Steel sub-structures and in particular high strength steels are also used where high strength - high elongation characteristics out way the use of aluminium. With the improved characteristics and responses of composites against tire and smoke, small and large composite materials made components are also found in greater quantities in today's railway vehicles. Full scale hybrid composite rolling stock vehicles are being developed and tested. While an "overdesigned" bodyshell may be deemed as acceptable from a structural point of view, it can, in reality, be a weight saving missed opportunity. The conventional pass/fail structural criteria and existing passenger payload definitions promote conservative designs but they do not necessarily imply optimum lightweight designs. The weight to strength design optimization should be a fundamental design driving factor rather than a feeble post design activity. It should be more than a belated attempt to mitigate against contractual weight penalties. The weight control process must be rigorous, responsible, with achievable goals and above all must be integral to the design process. It should not be a mere tabulation of weights for the sole-purpose of predicting the axle loads and wheel balances compliance. The present paper explores and discusses the topics quoted above with a view to strengthen the recommendations and needs for the weight optimization by design approach as a pro-active design activity for the rolling stock industry at large.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.4
• /
• pp.265-270
• /
• 2017

Background: Endotracheal intubation during anesthesia induction may increase airway resistance ($R_{aw}$) and decrease dynamic lung compliance ($C_{dyn}$). We hypothesized that prophylactic treatment with a transdermal ${\beta}2$-agonist tulobuterol patch (TP) would help to reduce the risk of bronchospasm after placement of the endotracheal tube. Methods: Eighty-two American Society of Anesthesiologists (ASA) category I or II adult patients showing obstructive patterns were divided randomly into a control and a TP group (n = 41 each). The night before surgery, a 2-mg TP was applied to patients in the TP group. Standard monitors were recorded, and target controlled infusion (TCI) with propofol and remifentanil was used for anesthesia induction and maintenance. Simultaneously, end-tidal carbon dioxide, $R_{aw}$, and $C_{dyn}$ were determined at 5, 10, and 15 min intervals after endotracheal intubation. Results: There was no significant difference in demographic data between the two groups. The TP group was associated with a lower $R_{aw}$ and a higher $C_{dyn}$, as compared to the control group. $R_{aw}$ was significantly lower at 10 min (P < 0.05) and 15 min (P < 0.01), and $C_{dyn}$ was significantly higher at 5 min (P < 0.05) and 15 min (P < 0.01) in the TP group. A trend towards a lower $R_{aw}$ was observed showing a statistically significant difference 5 min after endotracheal intubation (P < 0.01) in each group. Conclusions: Prophylactic treatment with TP showed a bronchodilatory effect through suppressing an increase in $R_{aw}$ and a decrease in $C_{dyn}$ after anesthesia induction without severe adverse effects.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.145-156
• /
• 2021

This study is aimed to improve the youth theft prevention program with rationality and practicality, based on the needs of practitioners who conduct these programs in fields. The survey questionnaire was prepared based on previous researches, and the survey was conducted on 72 probation officers and education instructors nationwide running a youth theft prevention program. As a result, practitioners reported the lack of self-control and high impulsivity as the main characteristics of the theft delinquent adolescents. And they recognized peer alignment and family problems as the causes of theft. As for the contents of the program, they reported that recidivism prevention skills such as understanding psychological problems, peer relationships, raising a sense of law compliance, anger, impulse control, dealing with negative emotions, and finding alternative behaviors, as well as moral development, are necessary. These results indicate that multi-dimensional interventions such as individuals, families, and peers are needed to prevent recidivism of juvenile theft. Implications of these results, future research directions, and limitations and significance of the study were discussed.

• Journal of Korean Society on Water Environment
• /
• v.37 no.1
• /
• pp.32-46
• /
• 2021

South Korea has been divided into quantities and water quality, and due to a revision of the Government Organization law in June 2018, the controversial water management system was integrated into the Ministry of Environment. The total Maximum Daily Loads System has been called the flower of water quality control, and since 2004, all three major river systems which have been introduced into the Han River system, despite its various difficult environments, and subsequently leading to all of the four major rivers undergoing obligatory implementation since 2013. Currently, the target TMDL (Han River Phase 1 and Other Water Systems Phase 3) for the 2020 stage has been implemented. The domestic TMDL established a basic plan for calculating the load which complies with the unit watershed's target water quality, as well as an implementation plan for annual load management, both which have been institutionalized in order to evaluate load compliance on a repeated annual basis. Local governments ask external organizations to conduct investigations every year in order to assess the transition, which thereby requires tens of millions of won every year. Therefore, an assessment and management model that can be easily operated at the TMDL personnel level is required. In this study, when the Han river Water System TMDL was implemented in earnest, we confirmed the the water quality improvement effect when TMDL was introduced to major inflow tributaries (TancheonA, JungnangA, AnyangA) under the Seoul City's jurisdiction through the use of the total amount control unit basin evaluation technique. By presenting customized management measures, we propose the guidelines that are necessary for determining more effective water environmental policies.

• Food Science and Industry
• /
• v.55 no.1
• /
• pp.58-73
• /
• 2022

Due to the recent demand for low-calorie foods, consumers are looking for alternative sweeteners that can control blood sugar, low risk of tooth decay and low calories. Regulations for permitted sweeteners in food vary from every country, and it is important for the government and the food industry to monitor products containing these sweeteners to ensure global compliance. Therefore, rapid, precise, and accurate analysis for food matrices should be applied to quality control, market surveillance, monitoring, and evaluation of food additive intake in the food industry. To analyze sweeteners simultaneously, it is essential to develop an efficient and rapid analytical method and to perform appropriate pretreatment steps such as solvent extraction and purification. This study presented the recent analysis trends about the suitable extraction method for food matrices focusing on non-nutritive sweeteners. Additionally, techniques for multi-compounds analysis using HPLC and LC-MS/MS and non-destructive analysis techniques using FT-IR were comprehensively described.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.363-376
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.The purpose of this study is to conduct a usability assessment to ensure that ergonomic design has been applied so that the ventilator central monitoring system can improve user satisfaction, efficiency, and safety. The rapid spread of COVID-19, which began in 2019, caused significant damage global medical system. In this situation, the need for a system to monitor multiple patients with ventilators was highlighted as a solution for various problems. Since medical device software is closely related to human life, ensuring their safety and satisfaction is important before their actual deployment in the field. In this study, a total of 21 participants consisting of respiratory staffs conducted usability test according to the use scenarios in the simulated use environment. Nine use scenarios were conducted to derive an average task success rate and opinions on user interface were collected through five-point Likert scale satisfaction evaluation and questionnaire. Participants conducted a total of nine use scenario tasks with an average success rate of 93% and five-point Likert scale satisfaction survey showed a high satisfaction result of 4.7 points on average. Users evaluated that the device would be useful for effectively managing multiple patients with ventilators. However, improvements are required for interfaces associated with task that do not exceed the threshold for task success rate. In addition, even medical devices with sufficient safety and efficiency cannot guarantee absolute safety, so it is suggested to continuously evaluate user feedback even after introducing them to the actual site.

• Journal of Chest Surgery
• /
• v.40 no.6 s.275
• /
• pp.428-434
• /
• 2007

Background: Recent studies have suggested that UFT may be an effective adjuvant therapy for completely resected IB (pT2N0) non-small cell lung cancer (NSCLC). We designed this study to clarify the feasibility of performing adjuvant chemotherapy with UFT for completely resected IB nor-small cell lung cancer, Material and Method: We randomly assigned patients suffering with completely resected IB non-small cell lung cancer to receive either UFT 3g for 2 year or they received no treatment. All patients had to be followed until death or the cut-off date (December 31 2006). Result: From June 2002 through December 2004, 64 patients were enrolled. Thirty five patients were assigned to receive UFT (the UFT group) and 29 patients were assigned to observation (the control group). A follow-up surrey on the 3 year survival rate was successfully completed for all the patients. The median follow-up time for all the patients was 32.8 months. In the UFT group, the median time of administration was 98 weeks (range: $2{\sim}129$ weeks). The rate of compliance was 88.2% at 6 months, 87.5% at 12 months, 80.6% at 18 month and 66.7% at 24 months. Seven recurrences (24.1%) occurred in the control group and six (17.1%) occurred in the UFT group (p=0,489). The three-year disease free survival rate was 71.3% for the control group and 82.0% for the UFT group (p=0.331). On the subgroup analysis, the three-year disease free survival rate for the patients with adenocacinoma was 45.0% for the control group and 75.2% for the UFT group (p=0.121). The three-year disease free survival rate for the patients with non-adenocarcinoma was 88.1% for the control group and 88.9% for the UFT group (p=0.964), Conclusion: Postoperative oral administration of UFT was well-tolerated. Adjuvant chemotherapy with UFT for completely resected pT2N0 adenocarcinoma of the lung could be expected to improve the disease free survival, but this failed to achieve statistical significance. A prospective randomized study for a large number of patients will be necessary.

• Korean Journal of Ecology and Environment
• /
• v.45 no.3
• /
• pp.271-277
• /
• 2012

The present study was conducted to assess the suitability of domestic natural waters as a Daphnia magna culture medium. In order to assess survival rate and reproductive output, young female daphnids (parent animals), aged less than 24 hours at the start of the test and produced in the Elendt M4 medium, were exposed to Elendt M4 medium, de-chlorinated tap water, and natural mineral water for 21 days. D. magna cultured in Elendt M4 medium (reference medium) and natural mineral water met the criteria of OECD No. 211, Daphnia magna Reproduction Test Guidelines in terms of percent adult survival, first day of reproduction, and average young production. However, the mortalities of adult daphnids observed in de-chlorinated tap water were more than 20% in two reproduction tests for 21 days. Mortality was observed on exposure days 13, 15, and 18 in de-chlorinated water. The use of D. magna is recommended in water of hardness >80 mg $CaCO_3\;L^{-1}$. However, the hardness of de-chlorinated tap water used in the present study was 50~53 mg $CaCO_3\;L^{-1}$. Therefore, it is judged that the delayed mortalities observed in de-chlorinated tap water were caused by a rapid decreased in hardness when the medium was changed from Elendt M4 to de-chlorinated tap water. When D. magna is cultured using domestic natural waters (underground water, surface water, and de-chlorinated water), the quality-control (QC) data should be maintained through a standardization for health assessment method, toxicity test method using reference chemical, test intervals of reference toxicant toxicity test, and data treatment and interpretation. In the long term, national research programs are needed for the development of test species which are representative of domestic aquatic environmental conditions among indigenous daphnids.

• Journal of Gastric Cancer
• /
• v.13 no.3
• /
• pp.164-171
• /
• 2013

Purpose: Laparoscopy-assisted distal gastrectomy for early gastric cancer has gained acceptance and popularity worldwide. However, laparoscopy-assisted distal gastrectomy for advanced gastric cancer is still controversial. Therefore, we propose this prospective randomized controlled multi-center trial in order to evaluate the safety and feasibility of laparoscopy assisted D2-gastrectomy for advanced stage gastric cancer. Materials and Methods: Patients undergoing distal gastrectomy for advanced gastric cancer staged cT2/3/4 cN0/1/2/3a cM0 by endoscopy and computed tomography are eligible for enrollment after giving their informed consent. Patients will be randomized either to laparoscopyassisted distal gastrectomy or open distal gastrectomy. Sample size calculation revealed that 102 patients are to be included per treatment arm. The primary endpoint is the non-compliance rate of D2 dissection; relevant secondary endpoints are three-year disease free survival, surgical and postoperative complications, hospital stay and unanimity rate of D2 dissection evaluated by reviewing the intraoperative video documentation. Discussion: Oncologic safety is the major concern regarding laparoscopy-assisted distal gastrectomy for advanced gastric cancer. Therefore, the non-compliance rate of clearing the N2 area was chosen as the most important parameter for the technical feasibility of the laparoscopic procedure. Furthermore, surgical quality will be carefully reviewed, that is, three independent experts will review the video records and score with a check list. For a long-term result, disease free survival is considered a secondary endpoint for this trial. This study will offer promising evidence of the feasibility and safety of Laparoscopy-assisted distal gastrectomy for advanced gastric cancer. Trial Registration: NCT01088204 (international), NCCCTS-09-448 (Korea).