• 대한지리학회지
• /
• 제39권1호
• /
• pp.116-131
• /
• 2004

본 연구의 목적은 조선산업 하청구조의 공간 특성을 고찰하는 것이다. 오늘날 기업은 다른 기업과 연관된 생산시스템을 통하여 기업의 목표를 달성해 나간다. 복잡하고 거대한 플랜트를 건조하는 조선산업의 하청구조는 모기업과의 거래관계를 규정하는 공간적 요인에 따라 상이한 특성을 보이고 있다. 우선 모기업의 생산공정에 직접 참여하는 사내하청기업이나 사외지역의 협동화단지업체들은 분사화된 특성을 보이면서 밀접하게 연결되어 있다. 그리고 기계산업으로 특화되어 있는 창원이나 전통적으로 조선기자재산업이 발달한 부산지역 업체들은 전문화의 정도가 상대적으로 높아 하청관계가 비교적 강하게 연결되어 있다. 이에 비해 비국지적으로 분포하거나 표준화된 제품을 공급하는 하청기업들은 대부분 연결도가 낮게 나타난다. 조선산업의 성숙한 발전을 위해서는 모기업 주변의 사내ㆍ외지역에 집적하는 조선전문 하청기업들과의 집중적 협력과 함께 기술적으로 특화된 원거리 업체들과의 선택적 거래관계를 강화해야 할 것이다.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.275-286
• /
• 2002

Statement of problem. Surface alteration of the implant screws after function may be associated with mechanical failure. Theses metal fatigue appears to be the most common cause of structural failure. Purpose. The purpose of this study was to evaluate surface alteration of the implant screws after function through the examination of used and unused implant screws in SEM(scanning electron microscope). Materials and methods. In this study, abutment screws(Steri-oss, 3i), gold retaining screw(3i) and titanium retaining screw(3i) were retrieved from patients. New, unused abutment and retaining screws were prepared for control group. Each of the old, used screws was retrieved with a screwdriver. And retrieved implant complex of Steri-oss system was prepared for this study. Then, SEM investigation and EDS analysis of abutment and retaining screws were performed. And SEM investigation of cross-sectioned sample of retrieved implant complex was performed. Results. In the case of new, unused implant screws, as maunfactured circumferential grooves are regularly examined and screw thread are sharply remained. Before ultrasonic cleansing of old, used implant screw, a lot of accumulation and corrosion products were existed. After ultrasonic cleansing of old, used implant screws, circumferential grooves as examined before function were randomly deepened and scratches increased. Also, dull screw thread was examined. More surface alterations after function were examined in titanium screw than gold screw. And more surface alteration was examined when retrieved with driver than retrieved without driver. Conclusions. These surface alteration after function may result in the screw instability. Regularly cleansing and exchange of screws was recommended. We recommend the use of gold screw rather than titanium screw, and careful manipulation of the driver.

• 한국가스학회지
• /
• 제23권2호
• /
• pp.28-34
• /
• 2019

현재 울산국가산업단지에는 생산량의 증대와 이송의 편의를 위해 막대한 규모의 지하매설배관이 설치되어 있다. 현재 울산국가산업단지에는 62개 사에 총 1,293km의 지하배관이 설치되어 있으며, 이 중에서 상당수는 사업장 외부에 설치되어 있다. 최근 3년간 울산국가산업단지에서는 5건의 누출사고가 발생하였으며, 대응시간은 평균 8시간 이상 걸렸다. 이러한 사고대응의 지체는 심각한 2차 사고로 이어질 수 있으며, 이는 지역주민들에게 큰 위험을 줄 수도 있다. 본 연구에서는 지하매설배관에 긴급차단장치를 설치하는 경우 사고영향평가를 통해 얼마나 누출사고의 영향이 경감되는지 분석하였다. 본 연구의 결과를 통해 긴급차단장치 설치가 지하매설배관의 누출사고의 피해를 줄이는 데 큰 역할을 할 수 있음을 검증하였다. 향후, 지하매설배관의 안전성 향상을 위해 시급히 긴급차단장치의 설치를 입법화하고 실행되어야 할 것이다.

• 대한지역사회영양학회지
• /
• 제29권1호
• /
• pp.34-50
• /
• 2024

Objectives: Transformation through a sustainable food system to provide healthy diets is essential for enhancing both human and planetary health. This study aimed to explain about sustainable diets and illustrate appropriate measurement of adherence to sustainable diets using a pre-existing index. Methods: For literature review, we used PubMed and Google Scholar databases by combining the search terms "development," "validation," "sustainable diet," "sustainable diet index," "planetary healthy diet," "EAT-Lancet diet," and "EAT-Lancet reference diet." For data presentation, we used data from National Health and Nutrition Examination Survey, 2017-2018, among adults aged 20 years and older (n = 3,920). Sustainable Diet Index-US (SDI-US), comprising four sub-indices corresponding to four dimensions of sustainable diets (nutritional quality, environmental impacts, affordability, and sociocultural practices), was calculated using data from 24-hour dietary recall interview, food expenditures, and food choices. A higher SDI-US score indicated greater adherence to sustainable diets (range: 4-20). This study also presented SDI-US scores according to the sociodemographic status. All analyses accounted for a complex survey design. Results: Of 148 papers, 16 were reviewed. Adherence to sustainable diets fell into 3 categories: EAT-Lancet reference diet-based (n = 8), Food and Agriculture Organization (FAO) definition-based (n = 4), and no specific guidelines but including the sustainability concept (n = 4). Importantly, FAO definition emphasizes on equal importance of four dimensions of diet (nutrition and health, economic, social and cultural, and environmental). The mean SDI-US score was 13 out of 20 points, and was higher in older, female, and highly educated adults than in their counterparts. Conclusions: This study highlighted that sustainable diets should be assessed using a multidimensional approach because of their complex nature. Currently, SDI can be a good option for operationalizing multidimensional sustainable diets. It is necessary to develop a Korean version of SDI through additional data collection, including environmental impact of food, food price, food budget, and use of ready-made products.

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.871-877
• /
• 2015

다양한 기계부품과 센서류가 포함된 수중로봇, 무인 잠수정 등과 같은 심해장비 시스템은 수심에 따른 높은 수압과 온도, 조류 등 심해의 복합적인 극한 환경조건의 영향을 받기 때문에 실제 현장에서 사용되기 전에 제품의 신뢰성을 검증하는 것이 매우 중요하다. 이러한 복합적인 해양환경을 재현하여 제품에 대한 실증적인 시험을 할 수 있는 시험장비의 구축이 요구되는 실정이다. 본 연구를 통하여 최대수압 2.0MPa, 수온 $5{\sim}60^{\circ}C$, 최대유속 2 m/s의 복합 환경조건의 구현이 가능한 워크인 타입의 수중복합 환경시험장비를 구성하는 주요 구성품의 개발 요구사양 및 설계방안을 제시하고 이를 통해 심해장비 시스템 및 모듈 부품에 대한 제품 신뢰도를 검증할 수 있는 시험장비의 개발 내용을 제시하고자 한다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 Proceedings of KSEH.Minamata Forum
• /
• pp.103-114
• /
• 2005

Chlorine disinfection has been used in drinking water supply to disinfect the water-borne microbial disease which may cause to serious human disease. As Chlorination is still the least costly, relatively easy to use, chlorination is the primary means to disinfect portable water supplies and control bacterial growth in the distribution system. However, chlorine also reacts with natural organic matter (NOM), which presents in nearly all water sources, and then produces disinfection by-product (DBps), which may have adverse health effects. Although the existent DBPs have been reported in drinking water supplies, it is not feasible to predict the levels of the various DBPs due to the complex chemistry reaction involved. The objectives of this study were to investigate seasonal variation of DBPs formation and difference of DBPs concentration in the plant to tap water. The average concentration of THMs was 20.04 ${\mu}g/{\ell}$, HAAs 8-15 ${\mu}g/{\ell}$, HANs 2-4.5 ${\mu}g/{\ell}$ respectively. Distant variation of DBPs formation is that THMs concentration increase by 17% at 2 km point from the plant and by 28% at 7 km and HAAs, HANs also increase each by 16%, 32%, at 2 km from the plant and 35%, 56%, at 7 km. DBPs increase in water supply pipe continually. The seasonal occurrence of DBPs is that in May and August DBPs concentration is very high then in March, in May DBPs concentration is highest. The temperature is main factor of DBPs formation, precursor also. Precursor which was accumulated for winter flowed into the raw water by flooding in spring and summer and produced DBPs. Therefore for the supply of secure drinking water, it is required to protect precursor of flowing into raw water and to add to BCAA and DBAA to drinking water standards.

• 지능정보연구
• /
• 제12권3호
• /
• pp.127-142
• /
• 2006

고객에 대한 빠른 대응과 유연하고 효율적으로 새로운 제품을 적기에 개발하기 위해서는 제품 플랫폼에 기초한 대량 맞춤이 절실히 요구된다. 본 연구의 목적은 대량맞춤을 구현하는 방안으로서 제품 가족 모델링을 위한 방안과 온톨로지를 이용하여 제품개발 관련 정보를 공유하기 위한 방안을 제시하고자 한다. 제품들이 점점 복잡해지고, 수명이 짧아지고 고객맞춤으로 되어감에 따라서 이를 실현하기 위한 디자인 노력은 보다 더 지식 집약적이고, 협업을 요구하며 정보의 공유를 필요로 하고 있다. 일련의 연관된 제품군간에 지식, 정보, 구성부품, 제조공정을 공유함으로서 제품 실현화 과정은 더 효율적이고 비용 대 효과가 좋고 고객에 대한 빠른 반응이 가능할 것이다. 본 연구에서 제시할 주요 내용으로는 제품가족 디자인을 위해서 필요한 기능분석, 제품가족 지도 및 가족 모델링을 위한 방안과, 제품가족 개발을 위해서 온톨로지 이용방안이다. 구현을 위해서 휴대전화기의 제품가족 분석과 분해에 의한 기능 분석 및 이 제품가족에 대한 온톨로지를 구축하였다.

• Journal of Biosystems Engineering
• /
• 제19권2호
• /
• pp.124-137
• /
• 1994

Visual features of a mushroom(Lentinus Edodes, L.) are critical in grading and sorting as most agricultural products are. Because of its complex and various visual features, grading and sorting of mushrooms have been done manually by the human expert. To realize the automatic handling and grading of mushrooms in real time, the computer vision system should be utilized and the efficient and robust processing of the camera captured visual information be provided. Since visual features of a mushroom are distributed over the front and back sides, recognizing sides and states of the stalk including the stalk orientation from the captured image is a prime process in the automatic task processing. In this paper, the efficient and robust recognition process identifying the front and back side and the state of the stalk was developed and its performance was compared with other recognition trials. First, recognition was tried based on the rule set up with some experimental heuristics using the quantitative features such as geometry and texture extracted from the segmented mushroom image. And the neural net based learning recognition was done without extracting quantitative features. For network inputs the segmented binary image obtained from the combined type automatic thresholding was tested first. And then the gray valued raw camera image was directly utilized. The state of the stalk seriously affects the measured size of the mushroom cap. When its effect is serious, the stalk should be excluded in mushroom cap sizing. In this paper, the stalk removal process followed by the boundary regeneration of the cap image was also presented. The neural net based gray valued raw image processing showed the successful results for our recognition task. The developed technology through this research may open the new way of the quality inspection and sorting especially for the agricultural products whose visual features are fuzzy and not uniquely defined.

• Journal of Radiation Protection and Research
• /
• 제35권1호
• /
• pp.12-20
• /
• 2010

원전 일차계통은 복잡한 수질환경으로 방사화생성물과 부식생성물 등 다양한 방사성핵종이 생성되고 있다. 이 방사성 핵종 중에서 원전종사자 피폭방사선량평가와 방사성유출물관리 측면에서 중요한 핵종으로는 $^3H,\;^{14}C,\;^{58}Co,\;^{60}Co,\;^{137}Cs,\;^{131}I$를 들 수 있다. 본 논문은 원전 방사선작업종사자와 원전 주변주민의 피폭방사선량에 기여가 큰 방사성핵종에 대해 살펴보고, 이들 핵종에 의한 선량평가 과정을 소개하였다. 특히 국내 원전에서 발생하였던 $^{131}I$ 내부피폭사건과 일차계통 냉각수의 탈염수 오염사건 등을 포함한 원전의 운영과정에서 일어났던 종사자와 원전주변주민에 대한 피폭 방사선량 평가 사례를 제시하였다. 또한 최근 이슈로 떠오른 삼중수소와 $^{14}C$의 선량평가에 대한 잠재적인 현안 등도 간단히 기술하였다.

• 대한인간공학회지
• /
• 제29권6호
• /
• pp.831-841
• /
• 2010

Usability evaluation of physical products involves characterizing complex physical interactions between humans and products. Human models known as manikins have been widely utilized as usability evaluation tools for automobile interior package design. When combined with computer-aided design software programs, such manikins can be used to simulate driving postures and evaluate driver-interior fits early in the design process, and therefore, may greatly facilitate achieving high-quality design in a cost-efficient manner. The purpose of this study was to define a set of manikins for designing automobile interior packages for the South Korean male population. These manikins were conceptualized as "boundary" manikins, which represent individuals lacking in certain physical capacities or having usability-related issues (e.g., an individual with the 5th percentile forward reach capability, an individual with the 95th percentile shoulder width). Such boundary manikins can serve as an efficient tool for determining if an automobile interior design accommodates the majority of the population. The boundary manikins were selected from the large sample of Korean males whose anthropometric dimensions were described in the recent Size Korea anthropometric database. For each male in the database, his comfortable driving posture was represented using a kinematic body linkage model and various physical capacity measured and usability-related characteristics relevant to driver accommodation were evaluated. For each such measure, a boundary manikin was selected among the Korean males. The manikins defined in this study are expected to serve as tools for ergonomic design of automobile interior packages. The manikin selection method developed in this study was implemented as a generic software program useful for various product design applications.