• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.109-113
• /
• 2002

Numerical analysis of aerodynamic heating for KPSAM is performed using aerodynamic heating model suitable to KPSAM, which has complex flow field resulting from the spike attached to the dome, such as large separation area and the strong shock/boundary layer interaction region around reattachment point on the dome. The aerodynamic heating model is validated and modified through the comparison between the flight test measurement and the thermal analysis results. TFD temperature sensors are installed on the dome to measure surface temperature during the flight. Computation results, obtained from the heat transfer analysis on the sensors, agree well with flight test data. The aerodynamic heating model provides heat transfer rate into surface as a boundary condition of unsteady 1D/axisymmetric thermal analysis on the missile structure. The axisymmetric thermal analysis using FLUENT is more versatile than the 1D analysis and can be applied to the heating problem related with complex structures and multi-dimensional heat transfer problems such as prediction of temperature rise at contact surface of different materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

AC impedance measurements on poly-p-phenylenevinylene (PPV) LEDs in the frequency range between 10 Hz and 10$\^$6/ Hz were carried out. The complex-plane impedance spectra indicate that PPV devices can be represented by equivalent circuits that corresponds to the bulk and interfacial regions at high and low frequencies, respectively. As a result of complex impedance analysis through the separation of bulk and interfacial region impedances, increase of forward bias in Al/PPV/ITO devices gave rise to relative decrease of the interfacial region impedance. Above the electric field of 10$\^$6/ V/cm the PPV device showed a space charge limited current (SCLC) conduction. The dependence of the transport mechanism and dielectric properties on the applied bias voltage is discussed.

• Computers and Concrete
• /
• v.24 no.1
• /
• pp.51-61
• /
• 2019

Compressive ability is one of the most important mechanical properties of concrete material. The compressive failure process of concrete is pretty complex with internal tension, shear damage and friction between cracks. To simulate the complex fracture process of concrete at meso level, methodology for meso-structural analysis of concrete specimens is developed; the zero thickness cohesive elements are pre-inserted to simulate the crack initiation and propagation; the constitutive applied in cohesive element is established to describe the mechanism of crack separation, closure and friction behavior between the fracture surfaces. A series of simulations were carried out based on the model proposed in this paper. The results reproduced the main fracture and mechanical feature of concrete under compression condition. The effect of key material parameters, structure size, and aggregate content on the concrete fracture pattern and loading carrying capacities was investigated. It is found that the inner friction coefficient has a significant influence on the compression character of concrete, the compression strength raises linearly with the increase of the inner friction coefficient, and the fracture pattern is sensitive to the mesostructure of concrete.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.3
• /
• pp.174-177
• /
• 2022

Facial degloving injuries are due to separation between the skin and subcutaneous tissues from the underlying muscles, bones, and fascia. These injuries often create a reconstructive challenge for surgeons especially when there are associated complications like wound infection or necrosis of the avulsed flap. This case report presents management of a case of facial degloving injury with full thickness necrosis of the avulsed flap. The authors concluded that treatment of such complex wounds requires a multi-disciplinary approach along with proper planning and staging of the surgical procedures for optimum aesthetic and functional outcomes.

• BMB Reports
• /
• v.29 no.6
• /
• pp.569-573
• /
• 1996

Clinical strains of Mycobacterium tuberculosis, M. terrae complex, M. gordonae, M. avium-intracellulae complex, and M. fortuitum from Korean patients were isolated and analyzed by comparing large restriction fragment (LRF) patterns produced by digestion of genomic DNA with infrequent-cutting endonucleases like AsnI and XbaI. and pulsed-field gel electrophoresis (PFGE). Three M. tuberculosis, two M. terrae complex, two M. gordonae, two M. avium-intracellulae complex, and two M. fortuitum strains were compared by using AsnI and XbaI. and this allowed easy visual separation of all epidemiologically unrelated strains. PFGE exhibits different DNA restriction patterns which are easy to compare. Genome size of the strains roughly ranged from 3020 to 3335 kb. The LRF patterns are useful for epidemiologic studies of tuberculosis with regard to drug resistance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.511-517
• /
• 2002

The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

• The Korean Journal of Zoology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 1964

GamnH-irradiated aqueous solutions of triglycine were studied using low voltage electrophoresis, paper chromatography, and determination of carbonyl compound. Four generalizations can be made as follows: 1. One component from irradiated triglycine formed a complex with copper ions and had higher electronegativity than did triglycine. 2. Five components from irradiated triglycine were separated by paper chromatography; of these, two were identified. 3. Carbonyl compound formation in irradiated triglycine increased up to $5{\times}10^{20}\;ev/ml$ and decreased at higher doses up to $1.9{\times}10^{21}\;ev/ml$ indicating its participation in secondary reaction in the complex system. 4. The possibility of hydrolytic brcabtgc of peptide bond was indicated by the separation of glycine from irradiated triglycine.lycine.

• Journal of Embryo Transfer
• /
• v.15 no.3
• /
• pp.203-210
• /
• 2000

The objective of this study was to identify a follicular fluid ingredient inhibiting the cumulus oocyte complex (COC) expansion. Thus, follicular fluid or liquid chromatographic fractions of follicular fluid was supplemented in COC culture medium. And COCs were incubated for 48 hours to investigate about cumulus expansion and also the first polar body extrusion. The results obtained were as follows; 1. The fluid of medium follicle significantly inhibited the COC expansion. 2. The fluid of large follicle inhibited the COC expansion. 3. Follicular fluid showed six major fractions at retention volumes (RVs) 1.83, 1.91, 2.15, 2.34, 2.53 and 2.74 ml after separation with Superose 12 column. Of the major fractions, fractions RV2.15, RV2.34, RV2.53 and RV2.74 inhibited both COC expansion and polar body extrusion. Especially, fractions of RV2.15 and RV2.53 significantly inhibited COC expansion, oocyte denudation and polar body extrusion. In conclusion, porcine follicular fluid contained a COC expansion inhibiting ingredient (CEI) that may be contained largely in fractions RV2.15 and RV2.53. And CEI may inhibit oocyte maturation by inhibition of oocyte denudation and extrusion of the first polar body.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.446-450
• /
• 2006

In order to treat the wastewater containing organic compound, pre-treatment system connected with MSP(molecular separation process) was investigated. With the aim of selecting an optimum process of Fenton's oxidation, removal efficiency of each process in the optimum reaction condition was recommended. The $Fe/H_{2}O_{2}$(ferric sulfate to hydrogen peroxide)reagent is referred to as the Fenton's regent, which produces hydroxyl radicals by the interaction of Fe with $H_{2}O_{2}$. The powerful oxidizing ability and extreme kinetic reactively of the hydroxyl radical was well established. Increasing dosage of $Fe/H_{2}O_{2}$ increased removal efficiency as molar ratio of $Fe/H_{2}O_{2}$ between 0.2 and 2.5. Optimum dosage of molar ratio was 1. The removal efficiency for reaction condition was increased as pH decreased when the molar ratio of $Fe/H_{2}O_{2}$ was 1.7. Fenton's oxidation was most efficient in the reaction time 35 min for complex wastewater. Also, coagulation aid experiments using kaolin resulted in 3% of kaolin dosage.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.481-495
• /
• 2021

This article assesses and estimates the progressive failure mechanism of complex pit-rest secondary toppling of slopes that are located within the vicinity of the Gas Flare Site of Refinery No. 4 in South Pars Special Zone (SPSZ), southwest Iran. The finite element numerical procedure based on the Shear Strength Reduction (SSR) technique has been employed for the stability analysis. In this regard, several step modelling stages that were conducted to evaluate the slope stability status revealed that the main instability was situated on the left-hand side (western) slope in the Flare Site. The toppling was related to the rock column-overburden system in relation to the overburden pressure on the rock columns which led to the progressive instability of the slope. This load transfer from the overburden has most probably led to the separation of the rock column and to its rotation downstream of the slope in the form of a complex pit-rest secondary toppling. According to the numerical modelling, it was determined that the Strength Reduction Factor (SRF) decreased substantially from 5.68 to less than 0.320 upon progressive failure. The estimated shear and normal stresses in the block columns ranged from 1.74 MPa to 8.46 MPa, and from 1.47 MPa to 16.8 MPa, respectively. In addition, the normal and shear displacements in the block columns ranged from 0.00609 m to 0.173 m and from 0.0109 m to 0.793 m, respectively.