• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.464-468
• /
• 2003

Complex impedances with frequency and voltage variation were analyzed in $ITO/Alq_3(60nm)/Al$ device structure. At low frequency, complex impedance is mostly expressed by resistive component, and at the high frequency by resistance and capacitive component. We have also evaluated resistance, capacitance and permittivity.

• 한국해양공학회지
• /
• 제27권3호
• /
• pp.8-14
• /
• 2013

Although there are various factors that threaten the security of ships, one of the most harmful is corrosion. It is not easy to find corroding areas and the status of corrosion, even though corrosion causes serious problems such as submergence and marine pollution as a result of leaking oil and polluted water. To monitor the corrosion of ships, non-destructive inspection, weight loss coupons, electrical resistance, linear polarization resistance, zero resistance ammeter, and electrochemical impedance spectroscopy have been developed. However, these methods require much time to detect corrosion, and most are not appropriate for real time monitoring. Coating, sacrificial anode, and impressed current cathodic protection (ICCP) methods have been developed to control corrosion. The ICCP and sacrificial anode methods are the most popular ways to prevent ship corrosion. However, ICCP is only appropriate for the outside of a ship and cannot be used for complex structures such as ballast tanks because these are composed of many separate chambers. Sacrificial anodes have to be replaced periodically. This paper proposes an integrated corrosion monitoring and control system (ICMCS) that can detect corrosion in real time and is appropriate for complex structures such as ballast tanks. Because the system uses titanium for an anode, exhausted anodes do not need to be replaced.

• Journal of Microbiology and Biotechnology
• /
• 제8권2호
• /
• pp.146-151
• /
• 1998

The aminoglycoside multiple-resistance determinant from Streptoalloteichus hindustanus was cloned into Streptomyces lividans and named nbrB. The 1.2-kb ApaI- BclI fragment encompassing nbrB was located within a 2.6-kb ApaI fragment by successive subcloning experiments. The complete DNA nucleotide sequence of 1.2-kb containing nbrB was determined. The sequence contains an open reading frame that putatively encodes a polypeptide of 281 amino acids with a predicted molecular weight of 30,992. The deduced amino acid sequence of nbrB shows identities of 85.1% to kgmB of S. tenebrarius, 59.6% to sgm of Micromonospora zionensis, and 57.7% to grm of M. rosea. The similarity of nbrB to kgmB suggests that nbrB encodes a 16S rRNA methylase similar to that encoded by kgmB and that both genes might be derived from a common ancestral gene.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.92-98
• /
• 1997

To make good use of chitosan forming complex with heavy metals in wood preservative treatment, woods impregnated with chitosan and copper sulfate were prepared. Amounts of leached copper, decay resistance, anti-mold efficacy, iron corrosion rates, moisture regain rates and degradation pattern in chitosan pre-treated and untreated wood were compared. After leaching test, amounts of leached copper from chitosan pre-treated wood had a much smaller than chitosan untreated wood, and good decay resistance was retained even after leaching test. From these results, it was proved that chitosan-copper complex formed in wood played and important role for decay durability. In chitosan pre-treated wood, damage values by test molds became remarkably smaller, but the growth of test molds was not perfectly inhibited. Distinct differences in iron corrosion rates between chitosan pre-treated and untreated woods was not recognized but chitosan pre-treated wood showed the lower moisture regain rates than chitosan untreated wood because of water insoluble chitosan membrane formed in wood. After leaching test, the tracheid walls in the wood treated with 2.0% copper sulfate only were eroded by the fungal attacks, but those in the wood pre-treated with chitosan remained almost intact.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.97-100
• /
• 2005

Recently sewage facilities mainly consisted of concrete structures are being deteriorated seriously by biodeterioration originated from sulfur-oxidizing bacteria. In this study, to prevent biochemical corrosion of the sewer concrete, antibiotics which prevent the growth of sulfur-oxidizing bacteria were developed and antimicrobial performance of it was investigated. After that, to consider applicability of antibiotics to concrete, durability such as resistance to carbonation, salt damage and chemical attack of concrete covered with inorganic and complex antibiotics were investigated. As a result of this study, it was proved that the antimicrobial performance of antibiotics was available. Also resistance to carbonation, salt damage and chemical attack of concrete covered with inorganic antibiotics was little improved but, in case of complex antibiotics, was remarkably improved. Moisture content of concrete, as a application condition of antibiotics in whole case, have little effect on performance but covering times of antibiotics have effect on performance only in case of complex antibiotics.

• Steel and Composite Structures
• /
• 제27권3호
• /
• pp.355-370
• /
• 2018

In steel-concrete composite beams, longitudinal shear forces are transferred across steel flange-concrete slab interface by means of shear connectors. The connector behavior is highly non-linear and involves several complex mechanisms. The design resistance and stiffness of composite beams depends on the shear connection behavior and the accuracy in the connector resistance prediction is essential. However determining the stud shear resistance is not an easy process: analytical methods do not give an adequate response to this problem and it is therefore necessary to use experimental methods. This paper present a summary of the main procedures to predict the resistance of the stud shear connectors embedded in solid slab, and stud shear connectors in composite slab using profiled steel sheeting with rib perpendicular to steel beam. A large number of experimental studies on the behavior of stud shear connectors and reported in the literature are also summarized. A comparison of the stud shear resistance prediction using six reference codes (AISC, AASHTO, Eurocode-4, GB50017, JSCE and AS2327.1) and other procedures reported in the literature against experimental results is presented. From this exercise, it is concluded that there are still inaccuracies in the prediction of stud shear resistance in all analysed procedures and that improvements are needed.

• 대한간호학회지
• /
• 제46권3호
• /
• pp.443-453
• /
• 2016

Purpose: The purpose of this study was to define the concept for psychological insulin resistance in the Korean population with diabetes. Methods: The Hybrid model was used to perform the concept analysis of psychological insulin resistance. Results from both the theoretical review with 26 studies and a field study including 19 participants with diabetes were included in final process. Results: The preceding factors of psychological insulin resistance were uncontrolled blood glucose and change in daily life. The concept of psychological insulin resistance was found to have three categories with 8 attributes such as emotional factors (negative feeling), cognitive factors (low awareness and knowledge, low confidence for self-injection) and supportive factors (economic burden, dependency life, embarrassing, feeling about supporters, feeling of trust in, vs mistrust of health care providers). The 8 attributes included 30 indicators. Conclusion: The psychological insulin resistance of population with diabetes in Korea was defined as a complex phenomenon associated with insulin therapy that can be affected by emotional factors, cognitive factors, and supportive relational factors. Based on the results, a tool for measuring psychological insulin resistance of Koreans with diabetes and effective programs for enhancing insulin adherence should be developed in future studies.

• Journal of Korean Neurosurgical Society
• /
• 제41권6호
• /
• pp.397-402
• /
• 2007

Objective : Balloon cells and dysplastic neurons are histopathological hallmarks of the cortical tubers of tuberous sclerosis complex [TSC] and focal cortical dysplasia [FCD] of the Taylor type. They are believed to be the epileptogenic substrate and cause therapeutic drug resistant epilepsy in man. P-glycoprotein [P-gp] is the product of multidrug resistance gene [MDR1], and it maintains intracellular drug concentration at a relatively low level. The authors investigated expression of P-gp in balloon cells and dysplastic neurons of cortical tubers in patients with TSC. Methods : An immunohistochemical study using the primary antibody for P-gp, as an indicative of drug resistance, was performed in the cortical tuber tissues in two patients of surgical resection for epilepsy and six autopsy cases. Results : Balloon cells of each lesion showed different intensity and number in P-gp immunopositivity. P-gp immunopositivity in balloon cells were 28.2%, and dysplastic neurons were 22.7%. These immunoreactivities were more prominent in balloon cells distributed in the subpial region than deeper region of the cortical tubers. Capillary endothelial cells within the cortical tubers also showed P-gp immunopositivity. Conclusion : In this study, the drug resistance protein P-glycoprotein in balloon cells and dysplastic neurons might explain medically refractory epilepsy in TSC.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.207-222
• /
• 2019

This paper has presented an effective and accurate meso-scale finite element model for simulating the fracture process of concrete under compression-shear loading. In the proposed model, concrete is parted into four important phases: aggregates, cement matrix, interfacial transition zone (ITZ), and the initial defects. Aggregate particles were modelled as randomly distributed polygons with a varying size according to the sieve curve developed by Fuller and Thompson. With regard to initial defects, only voids are considered. Cohesive elements with zero thickness are inserted into the initial mesh of cement matrix and along the interface between aggregate and cement matrix to simulate the cracking process of concrete. The constitutive model provided by ABAQUS is modified based on Wang's experiment and used to describe the failure behaviour of cohesive elements. User defined programs for aggregate delivery, cohesive element insertion and modified facture constitutive model are developed based on Python language, and embedded into the commercial FEM package ABAQUS. The effectiveness and accuracy of the proposed model are firstly identified by comparing the numerical results with the experimental ones, and then it is used to investigate the effect of meso-structure on the macro behavior of concrete. The shear strength of concrete under different pressures is also involved in this study, which could provide a reference for the macroscopic simulation of concrete component under shear force.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2004년도 International Meeting of the Microbiological Society of Korea
• /
• pp.45-46
• /
• 2004