• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.337-344
• /
• 2020

The purpose of this study was to investigate the effect of theratainment low extremity complex exercise using unstable surface on knee and static plantar pressure in patient with genu varum. 25 adult subjects were recruited and randomized into stable surface exercise group(SEG) and unstable surface exercise group(UEG). Subjects carried out complex exercise(elastic band exercise & squat exercise) for 40 minutes, 4 times per week for 5 weeks. The knee joint distance and Q-angle of all subjects measured, the foot pressure measured distribution on the front and rear of both foots during pre and post. The most outcome at post was significantly improved than the pre outcome in the both group(p<.05). The result of this study show that the low extremity complex exercise using unstable surface may be appropriate for improving structure of knee joint and static plantar pressure in patient with genu varum. This will enable the application of low extremity complex exercise using unstable surface in rehabilitation therapy of genu varum and it will help guide the selection of the therapist as one therapeutic basis.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.177-184
• /
• 2008

Acid-labile subunit(ALS) is a 85-kDa glycosylated plasma protein which forms a 150-kDa ternary complex with 7.5-kDa insulin-like growth factor(IGF) and 40~45-kDa IGF-binding protein-3. In a previous study, the present authors prepared a porcine ALS(pALS) expression construct by inserting a pALS coding sequence into a plasmid vector following synthesis of the sequence by reverse transcription-polymerase chain reaction(RT-PCR). The expression construct, however, was subsequently found to have a mis-sense mutation at two bases of the pALS coding sequence which is presumed to have occurred through a PCR error. In the present study, the correct coding sequence was synthesized by the site-directed mutagenesis and inserted into the pET-28a(+) plasmid expression vector containing the His-tag sequence flanking the last codon of the insert DNA. After induction of the expression construct in E. coli BL21(DE3) cells, the resulting presumptive recombinant peptide was purified by the Ni-affinity chromatography. Upon SDS- PAGE, the affinity-purified peptide was resolved as a single band at a 66-kDa position which is consistent with the expected molecular mass of the presumptive recombinant pALS. Collectively, results indicate that a recombinant pALS peptide was successfully expressed and purified in the present study.

• Korean Journal of Occupational Health Nursing
• /
• v.13 no.2
• /
• pp.104-117
• /
• 2004

Objectives: To propose the basic data for the development of the optimum health promotion program (HPP) for the workers in a petrochemical industry complex. Methods: The subjects were 553 workers who worked at the six plants in a petrochemical industry complex. From February to March 2003, questionnaire survey was conducted by the nurses with occupational health specialty about the life styles, interests, self-cognitions, practices of health behavior, subjective symptoms thought to be related the working environments, burden to the own health, needs and intentions to participation of the HPP. Data analysis was done using SPSS program (ver 10.0) with ${\alpha}=0.05$ of statistical significance. Results: The mean age and tenure of the subjects were 39.7 years and 14.2 years, respectively, and proportion of smokers was around 50%. Two of third (66%) satisfied their own job, and 58% recognized themselves healthy. The most frequent health behavior were exercise (60%) and regular health check (87%) in individual and job based, respectively. About half of them (58%) had at least one of the symptoms thought to be related the working environments, and the most frequent one was odor (21%). These symptoms were more frequent in case of the shorter career. The needs of HPP was relatively higher in exercise (66%), cancer prevention (51%), stress control (47%), and intention to participation was also the highest in exercise (64%). Job satisfaction was higher in case of the higher interests and cognitions to their own health, and thought that the ownership's interest to workers' health be high (p<0.01), but no associations with the subjective symptoms. The mean level of burden to the own health were $14.1{\pm}13.9$ of physical, $11.7{\pm}13.6$ of emotional, $9.1{\pm}10.7$ of behavioral as out of one hundred. They felt the more burden in case of office workers, the lower interests and cognitions to their own health, the lower satisfaction to their job, the frequent drinking group, and complained the subjective symptoms (p<0.05). Abnormal results of the regular health check was higher in the frequent drinking group (p=0.083). Conclusions: For the optimum HPP for the workers in the petrochemical complex, the ownership's interest to workers' health would be enhanced, and the priority would be focused on exercise and drinking habits control.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.160-170
• /
• 2008

This paper proposes a mathematical model for converting conveyor assembly line to cellular manufacturing in complex production environments. Complex production environments refer to the situations with multi-products, variant demand, different batch sizes and the worker abilities varying with work stations and products respectively. The model proposed in this paper aims to determine (1) how many cells should be formatted; (2) how many workers should be assigned in each cell; (3) and how many workers should be rested in shortened conveyor line when a conveyor assembly line should be converted, in order to optimize system performances which are defined as the total throughput time and total labor power. We refer the model to a new production system. Such model can be used as an evaluation tool in the cases of (i) when a company wants to change its production system (usually a belt conveyor line) to a new one (including cell manufacturing); (ii) when a company wants to evaluate the performance of its converted system. Simulation experiments based on the data collected from the previous documents are used to estimate the marginal impact that each factor change has had on the estimated performance improvement resulting from the conversion.

• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1773-1780
• /
• 2005

The process of mould design in the foundry industry has been based on the intuition and experience of foundry engineers and designers. To bring the industry to a more scientific basis the design process should be integrated with scientific analysis such as heat transfer. The production by foundry techniques is influenced by the geometry configuration, which affects the solidification conditions and subsequent cooling. Numerical simulation and/or experiments make possible the selection of adequate materials, reducing cycle times and minimizing production costs. The main propose of this work is to study the heat transfer phenomena in the mould considering the phase change of the cast-part. Due to complex geometry of the mould, a block unstructured grid and a generalized curvilinear formulation engaged with the finite volume method is described and applied. Two types of boundary conditions, diffusive and Newtonian, are used and compared. The developed numerical code is tested in real case and the main results are compared with experimental data. The results showed that the solidification time is about 6 seconds for diffusive boundary conditions and 14.8 seconds for Newtonian boundary conditions. The use of the block unstructured grid in combination with a generalized curvilinear formulation works well with the finite volume method and allows the development of more efficient algorithms with better capacity to describe the part contours through a lesser number of elements.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.223-235
• /
• 2014

In this study, it is the study of foreign tourism content information providing utilizing mobile indoor location information services. In particular, we compared the Web App used in Osaka, Japan. Widespread use of smartphones in the world increases, it is changed to free travel of individuals from group travel. Tourists cultural complex shopping mall is able to travel in a room is increasing. By utilizing the services of the guidance location based on the room, it is possible to easily obtain the discount coupon information, tourism content. Also, it is possible to grasp the movement path and disaster relief information. Osaka Japanese tourists increased after the earthquake in Tokyo. So we compare the difference in Osaka web and applications. If improving the indoor location information service method of domestic if it would help foreign tourists attract. In addition, it will give a big impact if there is a fusion of the Internet of things.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.4
• /
• pp.177-187
• /
• 2008

This study does try to proceed on the assumption that complex buildings can vitalize urban life of modern society from contemporary complexity and cases of past failure, and intend to propose future planning guidelines and directions of the neighborhood mixed-use buildings in the housing development district of small cities. For this purpose, thirty buildings which had been built on Bugok housing district in Gimcheon from 1999 until 2007 were chosen and investigated in urban and architectural dimension. The scope of this investigation is that site size is below 400 square meter and the number of stories on the ground below 5 floor, and the method of that is through field investigation, field photographs, and recordings and drawings on those. Investigative contents could be divided and analysized into physical and functional elements in urban and architectural dimension. On the basis of these results, the future planning approach of complex buildings in medium and small cities will be considered as planning principles.

• Journal of Powder Materials
• /
• v.12 no.1
• /
• pp.56-63
• /
• 2005

Ag powder was prepared from $AgNO_3$ by wet chemical reduction method using various reduction agent system involving $AgNO_3$, $AgNO_2$(AgCl) and Ag complex ion aqueous solution. The pure Ag powder could be prepared regardless of reaction system but the particle shape and distribution were affected very much according to the kind of reduction agents and reaction systems. The optimum reaction system for the preparation of the silver powder having the uniform particle shape and size distribution was Ag complex ion aqueous solution-reduction agent system and in particular, $H_2O_2$ and $C_6H_8O_6$as a reduction agent leaded the more uniform particle shape and size distribution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.253-258
• /
• 2020

Petrochemical industry complex in Korea always has high riskiness due to explosive and inflammable gases. To prevent these explosion, most facility of petrochemical industry complex requires the performance of explosive proof. The control panel, which is used as explosive proof, has been used the air injection method by manually from outside to constantly keep the temperature and pressure between inside and outside of the panel. In this paper, we propose the automatic temperature controller, which performs automatic heating and cooling according to temperature inside the panel in order to control temperature automatically.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.33-47
• /
• 2015

The purpose of this study is to understand the ideas of characteristic of convergence design related to slow fashion design. Convergence design in digital stage can be defined as a social phenomenon which different function of product move toward one direction for greater efficiency. Slow fashion is based on the Slow Movement. (This is a movement with similar principles to the Slow Food Movement, as it promotes an alternative mass production, such as fast fashion.) The aims of this research are to study slow fashion that has appeared in the fashion industry through various approaches for convergence designs, and to find the possibility of use for slow fashion. The research method consisted of carrying out case studies and analyzing literatures and proceeding cases. The characteristics of convergence designs are classified into technical convergence, emotion-oriented convergence and complex convergence. Technical convergence has an effect on slow fashion as a multi-functional design. Second, emotion-oriented convergence affects social-cultural design. Slow fashion related to a complex convergence design reveals emotion-oriented deign. Slow fashion is related to convergence design is to expect contribute to provide a good source for the future fashion industry and fashion market.