• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.2
• /
• pp.20-25
• /
• 2011

In this paper, two dimensional concrete slabs for a railroad bridge were analyzed by the specially orthotropic laminates theory. Both the geometrical and material property of the cross section of the slab was considered symmetrically with respect to the neutral surface so that the bending extension coupling stiffness, $B_{ij}$ = 0, and $D_{16}=D_{26}=0$ Bridge deck behaves as specially orthotropic plates. In general, the analytical solution for such complex systems is very difficult to obtain. Thus, finite difference method was used for analysis of the problem. In this paper, the finite difference method and the beam theory were used for analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.92-98
• /
• 2010

The design of press bonding tool in LCD module equipment is a very complex and difficult task because many design able variables are involved while their effects are not known. It takes longtime experiments and much expenses to verify the effects of these design variables. However the optimization of bonding tool using OLB(outer lead bonding) and PCB Bonding is a very important problem in LCD manufacturing process, so much design efforts have been made for improving the bonding tool performance. In this paper, a reasonable and fast process which gives optimized solution under the design requirements has been presented. Both analytical and statistical methods are employed in this process. A reliable analytic model using experiment-oriented FE analysis can be obtained, in which the regression equations that predict the tool efficiency from various DOE method are found. Improvement of tool efficiency could be estimated by the regression equations using meaningful factors converged by RSM(Response Surface Method). With this process a reasonable optimized solution that meets a variety of design requirements can be easily obtained.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.237-246
• /
• 2012

In this study, numerical model for transport of radionuclide and colloid was developed. In order to solve reaction-migration governing equation for colloid and radionuclide, Strang-splitting Sequential Non-Iterative (SNI), which is one of Operator Splitting Method, was used for numerical method and this was coded by MATLAB. From the verification by comparing the simulation results with analytical solution considering only solute transport and rock diffusion, the Pearson's correlation coefficient was greater than 0.99 which demonstrates the accuracy of the model.

• Mass Spectrometry Letters
• /
• v.8 no.3
• /
• pp.53-58
• /
• 2017

Glycated hemoglobin ($HbA_{1c}$) has been commonly used to screen and diagnose for patients with diabetes mellitus. Here the accelerated procedure of microwave-assisted sample treatment from acid hydrolysis to enzyme digestion followed by isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) was optimized and applied to measure $HbA_{1c}$ in an effort to speed up analysis time. First, two signature peptides of $HbA_{1c}$ and hemoglobin $A_0$ were certified with amino acid analysis by setting optimized acid hydrolysis conditions to $150^{\circ}C$, 1.5 h and $10{\mu}M$ sample concentration in 8 M hydrochloric acid. Consequently, the accurate certified peptides above were used as calibration standards to implement the proteolytic procedure with endoproteinase Glu-C at $37^{\circ}C$, 700 W for 6 h. Compared to the traditional method, the microwave heating not only shortened dramatically sample preparation time, but also afforded comparable recovery yields. The optimized protocol and analytical conditions in this study are suitable for a primary reference method of $HbA_{1c}$ quantification with full SI-traceability and other similar proteins in complex biological samples.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.E
• /
• pp.41-58
• /
• 1998

In this study, a wide range of volatile organic constituents of environmental tobacco smoke (ETS) were determined using an environmental chamber, where ETS is the sole source of target compounds. ETS was generated in an environmental chamber by a number of different cigarettes, including the Kentucky reference cigarette and eight different commercial brands. More than 30 compounds were measured simultaneously for a total of twelve experimental runs. The target compounds are classified into three major classes, i.e. vapor phase ETS markers including 3-ethnylpyridine (3-EP) and nicotine, carbonyl compounds including formaldehyde, and volatile organic compounds (VOCs). The results from the chamber study were used to generate characterized ratios of selected VOCs to 3-EP, a vapor phase ETS marker. Emission factors for VOCs associated with ETS were also estimated. The characteristic ratios appeared to be generally in good agreement with published data obtained by environmental chamber studies similar to this study. This implies that the ratios may be useful for identifying and quantifying the impact of ETS as a source of target compounds in 'real world' indoor environments, which is affected by a complex mixture of multi-sources. The environmental chamber method described here provides a direct and reliable method to compare the ETS generated by different cigarettes. The method can also be applied to the simultaneous determination of many different ETS components.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.116-120
• /
• 2007

In this study, it is presented analytic results of bending problems in the anisotropic curved thick beam and the anisotropic curved thin beam. The anisotropy is that the material properties are different in each directions and it is difficult to solve the analytical solutions because the behavior is complex. In applying numerical method to solve differential equations of anisotropic curved beams, this study uses the finite element method. Both thin beam theory and thick beam theory are used as the basic governing equations of bending problems in the anisotropic beams. The analytic results are compared between the anisotropic curved thick beams and the anisotropic curved thin beams.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.236-241
• /
• 2005

The purpose of this study is to find out the source(s) and distribution of boron in Nak-dong River. In the year of 2002, the boron has been adopted as a toxic constituent for Korean drinking water standard. In this study, the analytical samples were collected at 11 stations in March, June, September and December 2002. These samples were analyzed by inductively coupled plasma-mass (ICP-MS) method. The recovery, relative standard deviation and method detection limit of the ICP-MS method for boron was $89{\sim}111.3%$, $2.21{\sim}3.81%$ and $5{\mu}g/L$, respectively. The distribution of boron was ranged $65{\sim}155{\mu}g/L$ in March, $26{\sim}125{\mu}g/L$ in June, $22{\sim}140{\mu}g/L$ in September and $50{\sim}162{\mu}g/L$ in December. The higher levels of boron were found at Kum-ho river nearby the industrial complex, which seemed to be greatly affected by domestic sewages and wastewater from the upper streams. Thus, the concentration of boron and that of other components showed strong statistical correlation in this area. In the Nak-dong River, industrial wastewater and domestic sewages is thought to be the sources of boron.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.367-376
• /
• 2022

In this study, a steady and unsteady aerodynamic analysis program using a 3-dimensional subsonic unstructured panel method is developed and verified. Surfaces of bodies are modeled with the source and doublet distributions on triangular or quadrilateral panels. Geometry modeling of complex geometries and multi-body, therefore, can be easily accomplished. The Kelvin theory and the unsteady Kutta condition allow the doublet strength of the wake panels determined for unsteady flows. Various steady and unsteady flows in two and three dimensions are computed and compared with the analytical and the published computational results.

• Composites Research
• /
• v.22 no.5
• /
• pp.24-29
• /
• 2009

In this paper, a post-tensioned reinforced concrete slab was analyzed by the specially orthotropic laminates theory. Both the geometrical and material property of the cross section of the slab was considered symmetrically with respect to the neutral surface so that the bending extension coupling stiffness, $B_{ij}=0$, and $D_{16}=D_{26}=0$. Reinforced concrete slab behave as specially orthotropic plates. In general, the analytical solution for such complex systems is very difficult to obtain. Thus, finite difference method was used for analysis of the problem. In this paper, the finite difference method and the beam theory were used for analysis. The result of beam analysis was modified to obtain the solution of the plate analysis.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.4
• /
• pp.17-25
• /
• 2010

Evaluation of stability in traditional designing of reinforced soil structures is executed by examination of internal and external stability. Analysis of internal stability is for pull-out and ductile strength. Analysis of external stability is for settlement, overturning and sliding. To minimize inherent uncertainties of soil properties and analytical model, reliability analysis was developed recently. In this study, reliability analysis method considering simultaneous failure probability for various failure mode of internal and external stability is proposed. By applying uni-modal bounds, Stability of system reliability of reinforced soil structures is evaluated by integrating multi failure mode for various analytical model. Because of complex consideration for various failure shapes and modes, it is possible to secure advanced safety by using simultaneous failure probability. And evaluation of reinforced soil structure is executed by representative index, simultaneous failure probability, than previous method.