• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.405-412
• /
• 2010

The purpose of this paper is to compare complexity and to assess flexibility of competing transponder architectures for satellite communication services. For performance comparison, we consider three channelization techniques: digital down converter(DDC) based on the use of the cascaded integrator-comb(CIC) filter, tuneable pipeline frequency transform(T-PFT) based on the tree-structure(TS) and variable oversampled complex-modulated filter banks(OCM-FB) based on the polyphase FFT(P-FFT). The comparison begins by presenting a basic architecture of each channelization method and includes analytical expressions of the number of multiplications as a computational complexity perspective. The analytical results show that DDC with CIC filter requires the heavy computational burden and the perfect flexibility. T-PFT based on the TS provides the almost perfect flexibility with the low complexity over DDC with the CIC filter for a large number of sub-channels. OCM-FB based on the P-FFT shows the high flexibility and the best computational complexity performance compared with other approaches.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.669-682
• /
• 2019

Vibration mitigation of cables or hangers is one of the crucial problems for cable supported bridges. Previous research focused on the behaviors of cable with dampers or crossties, which could help engineering community apply these mitigation devices more efficiently. However, less studies are available for hybrid applied cross-ties and dampers, especially lack of both analytical and experimental verifications. This paper studied damping and frequency of two parallel identical cables with a connection cross-tie and an attached damper. The characteristic equation of system was derived based on transfer matrix method. The complex characteristic equation was numerically solved to find the solutions. Effects of non-dimensional spring stiffness and location on the maximum cable damping, the corresponding optimum damper constant and the corresponding frequency of lower vibration mode were further addressed. System with twin small-scale cables with a cross-link and a viscous damper were tested. The damping and frequency from the test were very close to the analytical ones. The two branches of solutions: in-phase modes and the out-of-phase modes, were identified; and the two branches of solutions were different for damping and frequency behaviors.

• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.55-60
• /
• 2007

A sensitive technique for the determination of trace Cu(II) in various samples after the column preconcentration by adsorbing its N-benzoylphenylhydroxylamine (BPHA) onto benzophenone was developed. Several experimental conditions such as the pH of the sample solution, the amount of chelating agent, the amount of benzophenone, and the flowrate of sample solution and so forth were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) and $CN^-$ interfered with more seriously than any other ions. However, the interference by these ions could be overcome sufficiently by adjusting the added volume of 0.01M BPHA to 10 mL. The dynamic range, the correlation coefficient ($r^2$) and the detection limit obtained by this proposed technique were 5.0~120 ng/mL, 0.9974, and 2.1 ng/mL, respectively. For validating this proposed technique, the aqueous samples (stream water, reservoir water, and wastewater), the plastic sample and the diluted brass sample were used. Recovery yields of 93~102% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. This method was also validated by the rice flour CRM (normal, fortified) samples. Based on the results from the experiment, it was found that this proposed technique could be applied to the determination of Cu(II) in various real samples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.629-633
• /
• 2011

Recently, systems such as aircraft, trains and ships have become larger more complex. Therefore, the reliability calculation of these systems is more difficult. This paper presents a reliability calculation algorithm for a complex system with a solution that is difficult to analyze. When the system has a very complex structure, it is very difficult to find an analytical solution. In this case, we can assess system reliability using the failure enumeration method of the reliability path. In this research, we represent the reliability block diagram by an adjacent matrix and define the reliability path. We can find any system status by the failure enumeration of the reliability path, and thus we can calculate any kind of system reliability through this process. This result can be applied to RCM (Reliability-Centered Maintenance) and reliability information-management systems, in which the system reliability is composed of the reliabilities of individual parts.

• YAKHAK HOEJI
• /
• v.56 no.4
• /
• pp.211-216
• /
• 2012

Drug dissolution test has been used for the purpose of both quality control of solid oral dosage forms and predicting in vivo drug release profiles. In this study, the dissolution profiles of buflomedil hydrochloride tablets and ticlopidine hydrochloride tablets were investigated according to the "Guidelines on Specifications of Dissolution tests for Oral dosage forms" of Korean Pharmacopoeia (KP). The analytical method using HPLC was validated. The validation was performed in terms of specificity, linearity, accuracy, precision and limit of quantitation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.2 s.119
• /
• pp.121-129
• /
• 2007

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. Muller's method is utilised for obtaining complex roots of a dispersion wave equation, which does not converge in the conventional wave method based on a simple iteration. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-antisymmetric technique. The important hypothesis that the coupled beam wavenumber is sufficiently smaller than the plate free wavenumber is experimentally verified. Finally, experimental results such as powers and energy ratios show the validity of the analytical wave models.

• Structural Engineering and Mechanics
• /
• v.61 no.1
• /
• pp.105-116
• /
• 2017

In this paper, the optimal extended homotopy analysis method (OEHAM) is introduced to deal with the damped Duffing resonator driven by a van der Pol oscillator, which can be described as a complex Multi-Degree-of-Freedom (MDOF) nonlinear coupling system. Ecumenically, the exact solutions of the MDOF nonlinear coupling systems are difficult to be obtained, thus the development of analytical approximation becomes an effective and meaningful approach to analyze these systems. Compared with traditional perturbation methods, HAM is more valid and available, and has been widely used for nonlinear problems in recent years. Hence, the method will be chosen to study the system in this article. In order to acquire more suitable solutions, we put forward HAM to the OEHAM. For the sake of verifying the accuracy of the above method, a series of comparisons are introduced between the results received by the OEHAM and the numerical integration method. The results in this article demonstrate that the OEHAM is an effective and robust technique for MDOF nonlinear coupling systems. Besides, the presented methods can also be broadly used for various strongly nonlinear MDOF dynamical systems.

• Structural Engineering and Mechanics
• /
• v.91 no.6
• /
• pp.627-642
• /
• 2024

In the present work, the deformation and stresses induced in a functionally graded disk have been reported for different loading conditions. The governing differential equation is solved using the classical method namely Navier's method by considering thermal and mechanical boundary conditions at the surface of the disk. To simplify solving the second-order differential equation, a plane stress condition was assumed. Following validation using a one-dimensional steady-state heat condition problem, temperature variations were computed for constant heat generation and varying conductivity. The research aims to investigate both the individual and combined effects of rotation, gravity, and temperature with constant heat generation on a hollow disk operating under complex loading conditions. The results demonstrated a high degree of accuracy when compared with those in existing literature. Material properties, such as Young's modulus, density, conductivity, and thermal expansion coefficient, were modeled using a power law variation along the disk's radius by considering aluminum as a base material. The proposed analytical method is straightforward, providing valuable insights into the behavior of disks under various loading conditions. This method is particularly useful for researchers and industries in selecting appropriate loading conditions and grading parameters for engineering applications, including aerospace components, energy systems, and rotary machinery parts.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.1 s.59
• /
• pp.35-43
• /
• 2006

Formaldehyde is important because of their irritant and toxic properties, mutagenicity and carcinogenicity. In this study, liquid chromatography-mass spectrometry (LC-MS) is used for the analysis of formaldehyde after derivatization with 2,4-dinitrophenylhydrazine (DNPH) cartridge. Analytical parameters such as linearity, repeatability and minimum detection limit were evaluated. The linearity ($r^2$) was 0.9997 when analyte concentration ranges from 25 to $200{\mu}g/l$. The relative standard deviation (%RSD) was 1.25 % for concentration of $200{\mu}g/l$. The minimum detection limit (MDL) was 0.73 ppbv. It was shown that LC-MS method has a great potential for formaldehyde analysis. The results of formaldehyde from the survey of Ban-Woll and Shi-Hwa Industrial Complex samples, the highest level was 6.20, 3.93 ppb, respectively. The highest emission level of formaldehyde at chemical plants in the Ban-Woll' Shi-Hwa Industrial Complex was 5421.25 ppb.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.51-56
• /
• 2016

Purpose: As declines in the quality of residential environments occur, such as urban heat island effect, tropical night phenomenon, and violations of right to light and privacy due to urban densification and high rise building, these problems are emerging as social issues. In order to improve these issues, design factors which consider environmental aspects must be selected when planning apartment complexes, and ways to reflect them in the planning phase must be explored. Method: In this study, the analytical hierarchy process(AHP) was used to deduce design factors that considered environmental elements during the planning of apartment complexes. Furthermore, the priority and weight for each evaluation index were assessed. The objective was to propose a guideline for planning apartment complexes by finding the best solution for each evaluation index using complex weight values. Result: Floor area ratio was selected as the most important evaluation criterion in the environmentally conscious evaluation index for apartment complex planning. The shape and placement of skylights were selected as the most important evaluation criteria in the sunshine environment for a pleasant residential environment. Ground surface cover design was selected as the most important criterion in the outdoor thermal environment index for improving the microclimate within cities and apartment complexes. Thus, the results of this study can serve as an investigation guideline that concerns policy and regulations, and as reference data that can be used in planning apartment complexes.