• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.531-534
• /
• 1989

In this paper, the way that input voltage and input line current as a control variable is provided as one unit is projected. Till no, have denied with three phase balanced load. But, in that case, total power factor compensation is difficult, for to control each phase at unbalanced load. Therefor, in this paper suggest of the scheme that three phase unbalanced load is controlled by each phase and input total power factor is compensated unit input factor. therefore, in this paper suggest that three phase unbalanced load is controlled and the method in compensation of unit input factor to be attended by unbalanced load. Besides, the object of control is calculating quantity for input voltage and input line current for the point at issuse make to improve of control method at unbalanced load. As a result, control system of each phase could maintain as a unit input total power factor has been state diviation error of 2% with unbalanced load.

• Journal of Biomedical Engineering Research
• /
• v.20 no.3
• /
• pp.265-274
• /
• 1999

In this paper, we propose a novel interframe coding algorithm especially appropriate for 3-D medical images. The proposed algorithm is based on a video coding algorithm using motion estimation/ compensation and transform coding. In the algorithm, warping is adopted lor motion compensation (MC). Then, by using adaptive mode selection, a motion compensated residual image and original image are mixed up in the wavelet transform domain for improvement in coding performance. The mixed image is then compressed by the zerotree coding method. We prove that the adaptive mode selection technique in the wavelet transform domain is very useful lor 3-D medical image coding. Simulation results show that the proposed scheme provides good performance regardless of inter-slice distance and is prospective for 3-D medical image compression.

• Korean Journal of Occupational Health Nursing
• /
• v.16 no.2
• /
• pp.222-231
• /
• 2007

Purpose: This study aims to suggest political alternatives for nursing care costs for PCAs to provide qualitative medical benefit for patients with occupational disease by investigating present situation and problems of the nursing care cost system of Korea's Industrial Accident Compensation Insurance. Methods: Data was collected from 6 workers' accident medical corporation and 275 nurses affiliated with Korea labor welfare corporation using self reported questionnaire. Result: Research results were as follows; Character of nursing care cost of the Korea's Industrial accident Compensation Insurance changed as if it aims to support for living expenses for the family; As possible problems which could be caused under current system, administrative problems, decrease of service quality were made as objects of criticism. Some patients did not make every effort in rehabilitation to be beneficiaries continuously. Some patients were supplied with whole one PCA or all-night PCA even though they did not need as much caring as such. Conclusion: The research suggested that PCAs payment system improvement is necessary, and the presented nurses' opinion for the improvement method could be applied for policy making.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.102-111
• /
• 1994

This article deals with the problem of designing a robust algorithm for the motion control of robot manipulator whose nonlinear dynamics contain various uncertainties. To ensure high performance of control system, a model-based feedforward compensation with continuous robust control has been developed. The control structure based on the deterministic approach consists of two parts : the nominal control law is first introduced to stabilize the system without uncertainties, then a robust nonlinear control law is adopted to compensate for both the resulting errors(or structured uncertainties) and unstructured uncertainties. The uncertainties assumed in this study are bounded by polynomials in the Euclidean norms of system states with known bounding coefficients. The presented control scheme is relatively simple as well as computationally efficient. With a feasible class of desired trajectories, the proposed control law provides sufficient criteria which guarantee that all possible responses of the closed-loop system are uniformly ultimately bounded in the presence of uncertainties. Therefore, the control algorithm proposed is shown to be robust with respect to the involved uncertainties.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.72-78
• /
• 2004

In this paper, we evaluate the performance of the digital modulation schemes described in the APCO Project 25 FDMA specifications which can be used for applying the ultra-narrowband technology to the current domestic simple two-way radio systems, and discuss difficulties in the DSP implementation of the systems. We analyze the effect on the systems' BER performance of receiver non-matched filter and frequency-offset between the transmitter and receiver oscillators. And we present a frequency offset compensation method for improving the system performance. The results of performance analysis showed that the CQPSK of APCO Project 25 using non-matched filter degraded the BER by 0.5～1.0 ㏈ comparing with PI/4 DQPSK using matched filter. In the event of 2 % frequency offset, about 1 ㏈ performance loss was produced at the BER of $$10^{-3}TEX>. With the frequency-offset compensation method implemented in the systems using phase recovery scheme of PSK synchronization detection, the performance degradation of about 1.0 ㏈ was occurred at the BER of $$10^{-3}TEX> for 10 % of frequency offset. The proposed method can be used for the improvement of system performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.6
• /
• pp.524-529
• /
• 2005

In this paper, a novel neural network compensation technique for PD like fuzzy controlled robot manipulators is presented. A standard PD-like fuzzy controller is designed and used as a main controller for controlling robot manipulators. A neural network controller is added to the reference trajectories to modify input error space so that the system is robust to any change in system parameter variations. It forms a neural-fuzzy control structure and used to compensate for nonlinear effects. The ultimate goal is same as that of the neuro-fuzzy control structure, but this proposed technique modifies the input error not the fuzzy rules. The proposed scheme is tested to control the position of the 3 degrees-of-freedom rotary robot manipulator. Performances are compared with that of other neural network control structure known as the feedback error learning structure that compensates at the control input level.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2521-2524
• /
• 2003

Since inertial sensor errors which increase with time are caused by initial orientation error and sensor errors (accelerometer bias and gyro drift bias), the accuracy of these devices, while still improving, is not adequate for many of today's high-precision, long-duration sea, aircraft, and long-range missile missions. This paper presents a navigation error compensation scheme for Strap-Down Inertial Navigation System (SDINS) using Line-Of-Sight(LOS) vector from star sensor. To be specific, SDINS error model and measurement equation are derived, and Kalman filter is implemented. Simulation results show the bounded-ness of position and attitude errors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.191-202
• /
• 2013

A control structure that makes possible the integration of a kinematic controller and a fuzzy logic (FL) deadzone compensator for mobile robots is presented. A tuning algorithm is given for the fuzzy logic parameters, so that the deadzone compensation scheme becomes adaptive, guaranteeing small tracking errors and bounded parameter estimates. Formal nonlinear stability proofs are given to show that the tracking error is small. The fuzzy logic deadzone compensator is implemented on a mobile robot to show its efficacy.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.389-397
• /
• 2017

A control scheme for stand-alone inverters that utilizes an inductor current observer (ICO) is proposed. The proposed method measures disturbance load currents using a current sensor and it estimates the inductor current using the ICO. The filter parameter mismatch effect is analyzed to confirm the ICO's controllability. The ICO and controllers are designed in a continuous-time domain and transferred to a discrete-time domain with a digital delay. Experimental results demonstrate the effectiveness of the ICO using a 5-kVA single-phase stand-alone inverter prototype. The experimental results demonstrate that the observed current matches the actual current and that the proposed method can archive a less than 2.4% total harmonic distortion (THD) sinusoidal output waveform under nonlinear load conditions.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.188-190
• /
• 2019

Long-term global motion compensation (LT-GMC) was designed to compensate camera motion effectively. The LT-GMC warps a reference picture according to an estimated affine/homography model and stores it in its decoded picture buffer for long-term reference. Most previous works on LT-GMC have focused on improving quality of the warped picture, however, there has been only little consideration on the overhead of its motion coding. In this paper, we address this problem and propose a method, namely Scaling Predictor, to reduce the motion coding overhead for LT-GMC. Our experiment has shown BD-Rate reduction of 1.40% over conventional LT-GMC scheme by applying the proposed method.