• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1650-1657
• /
• 2017

In this study, the distributed secondary voltage control of islanded microgrids with multi-agent consensus algorithm is investigated. As an alternative to a time-triggered approach, an event-triggered scheme is proposed to reduce the communication load among inverter-based distributed generators (DGs). The proposed aperiodic control scheme reduced unnecessary utilization of limited network bandwidth without degrading control performance. By properly establishing a distributed triggering condition in DG local controller, each inverter is only required to send voltage information when its own event occurs. The compensation of voltage amplitude deviation can be realized, and redundant data exchange related to fixed high sampling rate can be avoided. Therefore, an efficient use of communication infrastructure can be realized, particularly when the system is operating in steady state. The effectiveness of the proposed scheme is verified by simulations on a microgrid test system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.433-439
• /
• 2018

In this paper, a SDINS(strapdown inertial navigation system) rapid initial alignment technique with adaptive time delay compensation is proposed. The proposed method consists of two steps. In first step, misalignment and data latency are estimated by conducting pre-transfer alignment. Then, hybrid alignment is designed to rapidly find the misalignment changes induced by pyro-shock. To improve the performance of hybrid alignment, adaptive time delay compensation method is suggested. We verify the performance improvement of the proposed alignment scheme comparing with the conventional transfer alignment method by van test. The test result shows that the proposed alignment technique improves alignment performance.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2082-2084
• /
• 1997

This paper proposes a new control strategy of bidirectional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system Performance is verified by the simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.586-590
• /
• 2001

In this paper, a novel control scheme compensating source voltage unbalance and harmonic currents for hybrid active power filters is proposed, where no low/high-pass filters are used in compensation voltage composition. The phase angle and compensation voltages for source harmonic current and unbalanced voltage components are derived from the positive sequence component of the unbalanced voltage set, which is simply obtained by using digital all-pass filters. Since a balanced set of the source voltage obtained by scaling the positive sequence components is used as reference values for source current and load voltage, it is possible to eliminate the necessity of low/high-pass filters in the reference generation. Therefore the control algorithm is much simpler and gives more stable performance than the conventional method. In addition, the source harmonic current is eliminated by compensating for the harmonic voltage of the load side added to feedback control of the fundamental component.

• Journal of Power Electronics
• /
• v.9 no.5
• /
• pp.791-799
• /
• 2009

This paper presents a time-varying sinusoidal disturbance compensation method (based on an adaptive estimation scheme) for induction motor drives fed by a matrix converter. In previous disturbance accommodation methods, sinusoidal disturbances with unknown time-invariant frequencies have been considered. However, in the new method proposed here, disturbances with unknown time-varying frequencies are considered. The disturbances can be estimated by using a disturbance accommodating observer, and an additional control input is added to the induction machine drive. The stability analysis is carried out considering the disturbance estimation error and simulation results are shown to illustrate the performance of the proposed solution.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.353-357
• /
• 2008

One objective in developing the next generation of wireless communication systems is to increase data rates and reliability. A promising way to achieve this is to combine multiple-input and multiple-output signal processing with a space-time coding scheme, which offers higher coding and diversity gains and improves the spectrum efficiency and reliability of a wireless communication system. It is noted, however, that time delay differences and phase differences among different channels increase symbol interference and degrade system performance. In this letter, we investigate phase differences and their effects on multiple-input and multiple-output systems, and propose a compensation algorithm for the Rayleigh fading model to minimize their effects.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1049-1051
• /
• 2001

This paper proposes a new control strategy of multifunctional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system performance is verified by the simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1199-1201
• /
• 2005

In the synthetic aperture radar (SAR) system, the motion error is the main phase error sources and the motion compensation is very important. The phase gradient autofocus (PGA) is a state of art technique for phase error correction of SAR. It exploits the redundancy of the phase-error information among range bins by selecting the strongest scatter for each range bin and synthesizes them. The motivation of this paper is based on the observation that the redundancy of phase error is also among the cross-range direction. Moreover, the proposed method applies the weighting function to better utilize the phase error information. The validity of the proposed scheme for PGA is tested with some numerical simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.439-444
• /
• 2009

Recently, a wide range of next-generation's game consoles has been developed by many game makers. Particularly, active interaction between users and games is required more than ever before for giving gamers the fullest pleasure. In this work, an infrared image sensor based position recognition system which can be used for virtual game interface is proposed. Furthermore, two kinds of compensation algorithms and Extended Kalman Filter are utilized to enhance the performance of the proposed system. The proposed system can effectively generate the position of the gamer in the face of the coordinate distortion and noise. To verity the feasibilities of the proposed system, various experiments are carried out.

• Journal of electromagnetic engineering and science
• /
• v.7 no.3
• /
• pp.103-108
• /
• 2007

In this paper, a low-power 2.4 GHz front-end for sensor network application (IEEE 802.15.4 LR-WPAN) is designed in a 0.18 um CMOS process. A power supply circuit with a novel temperature-compensation scheme is presented. The simulation and measurement results show that the front-end (LNA, Mixer) can achieve a voltage gain of 35.3 dB and a noise figure(NF) of 3.1 dB while consuming 5.04 mW (LNA: 2.16 mW, Mixer: 2.88 mW) of power at $27^{\circ}C$. The NF includes the loss of BALUN and BPF. The low-IF architecture is used. The voltage gain, noise figure and third-order intercept point (IIP3) variations over -45$^{\circ}C$ to 85$^{\circ}C$ are less than 0.2 dB, 0.25 dB and 1.5 dB, respectively.