• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.271-272
• /
• 2009

We fabricated a hybrid aligned film using reactive rod-like mesogen to reduce light leakage of twisted nematic(TN) cell in off-axis of the dark state. We proved that the fabricated compensation film has hybrid alignment by changing phase retardation according to polar angle. In this paper, we confirmed characteristics of compensation film through simulation results and found the matching factor of simulation results and experimental result. In result, the maximum pretilt angle of hybrid compensated film is $19^{\circ}$ which has phase retardation 0.1445.

• 대한음성학회지:말소리
• /
• 제55권
• /
• pp.131-142
• /
• 2005

A mismatch between the training and the test conditions often causes a drastic decrease in the performance of the speech recognition systems. In this paper, non-linear transformation techniques based on histogram equalization in the acoustic feature space are studied for reducing the mismatched condition. The purpose of histogram equalization(HEQ) is to convert the probability distribution of test speech into the probability distribution of training speech. While conventional histogram equalization methods consider only the probability distribution of a test speech, for noise-corrupted test speech, its probability distribution is also distorted. The transformation function obtained by this distorted probability distribution maybe bring about miss-transformation of feature vectors, and this causes the performance of histogram equalization to decrease. Therefore, this paper proposes a new method of calculating noise-removed probability distribution by using assumption that the CDF of noisy speech feature vectors consists of component of speech feature vectors and component of noise feature vectors, and this compensated probability distribution is used in HEQ process. In the AURORA-2 framework, the proposed method reduced the error rate by over $44\%$ in clean training condition compared to the baseline system. For multi training condition, the proposed methods are also better than the baseline system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1380-1383
• /
• 2004

The scanning type XY stage is frequently used these days as precision positioning system in equipment for semiconductor or display element. It is requested higher velocity and more precise accuracy for higher productivity and measuring performance. The position accuracy of general stage is primarily affected by the geometric errors caused by parasitic motion of stage, misalignments such as perpendicular error, and thermal expansion of structure. In the case of scanning type stage, H type frame is usually used as base stage which is driven by two actuators such as linear motor. In the point view of scanning process, the stage is used in moving motion. Therefore, dynamic variation is added as significant position error source with other parasitic motion error. Because the scanning axis is driven by two actuators with two position detectors, 2 dimensional position errors have different characteristic compared to general tacked type XY stage. In this study 2D position error of scanning stage is analyzed by 1D heterodyne interferometer calibrator, which can measure 1D linear position error, straightness error, yaw error and pitch error, and perpendicular error. The 2D position error is evaluated by diagonal measurement (ISO230-6). The yaw error and perpendicular error are compensated on the base stage of scanning axis. And, the horizontal straightness error is compensated by cross axis compensation. And, dynamic motion error in scanning motion is analyzed.

• 한국컴퓨터산업학회논문지
• /
• 제2권8호
• /
• pp.1075-1088
• /
• 2001

본 논문에서는, H.263 부호화기에 있어, 비제한 움직임 벡터(Unrestricted Motion Vector, UMV)모드와 기본 예측 모드(Default Prediction Mode)의 동적 선택을 위한 방법을 제안한다. 여기서, 움직임 보상된 영상과의 오차와 움직임 벡터의 크기를 이용하였다. 제안된 전략에서, UMV 모드는 모션 벡터의 크기와 움직임 보상된 영상의 오차에 따라 동적으로 적용된다. 이러한 전략은 UMV나 DPM을 고정적으로 전체 영상에 적용한 결과에 비해 화질 면에서 개선할 점을 제공한다. UMV 모드가 고정적으로 적용된 경우에 비해 움직임 추정 시 탐색 점의 수를 크게 줄일 수 있다. 제안된 방법은 카메라의 이동을 갖는 보다 긴 영상 신호에 대해 보다 효과적으로 적용될 수 있다.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.209-212
• /
• 2012

In this paper, we have studied on the optimal design of the optical compensation film for the TN-LCDs. To have wide viewing angle panels, several methods such as multi-domain method, optical path method, and phase compensation method have been proposed. Among these methods, this paper focused on the phase compensation method. In the phase compensation method, the phase retardation generated from the optical birefringence for the off-axis incident is compensated by using optical films with refractive anisotropy. To compensate the phase retardation of the TN-LCDs, we have proposed design concept for the biaxial optical films and analyzed the optical performance for the proposed structures. The calculation of the dynamic motion of the liquid crystals was based on the Ericksen-Leslie theory and the optical performance of the TN-LCD was calculated from the Extended Jones Matrix Method. From the results, we have confirmed that the optical characteristics of the TN-LCDs with the biaxial films have been improved considerably compared with the TN-LCDs compensated by the combination of the uniaxial films.

• 한국산학기술학회논문지
• /
• 제10권2호
• /
• pp.269-273
• /
• 2009

정전압기는 VCO의 제어전압의 전원 잡음을 줄이기 위해 사용될 수 있다. 정 전압기의 최적 설계를 위해선 정전압기에 대한 정확한 해석이 필요하다. 본 논문에서는 최근 발표된 논문의 정전압기 해석 과정에 MOSFET의 기생 커패시턴스 성분을 고려하지 않은 문제점을 보완하였다. 이 문제점을 이론적으로 분석하여 정확한 해석을 유도하였고, 회로 시뮬레이션과 측정을 통해 검증하였다. 정전압기는 $0.18{\mu}m$ 1P6M CMOS 공정으로 설계되었고, 칩 면적은 $1mm^2$ 이다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.111-117
• /
• 2000

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. This paper models the thermal errors for error analysis and develops an on-the-machine measurement system by which the volumetric errors are measured and compensated. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses and a designed spherical ball artifact (SBA). Experiments show that the developed system provides a high measuring accuracy, with repeatability of $\pm$2$\mu\textrm{m}$ in X, Y and Z directions. It is believed that the developed measurement system can be also applied to the machine tools with CNC controller. In addition, machining accuracy and product quality can be also improved by using the developed measurement system when the spherical ball artifact is mounted on a modular fixture.

• 한국조경학회지
• /
• 제35권3호
• /
• pp.105-113
• /
• 2007

This study was conducted to analyze the effects of environmental factors such as soil moisture, light intensity, temperature and humidity on changes in cambial electrical resistance. To improve data quality, cambial electrical resistance was continuously measured at fixed points by using a data logger isolated from alternating current. The relationship between environmental factors and changes in cambial electrical resistance was also analyzed. The results are as follows: 1. Cambial electrical resistance is highly correlated to the temperature of the measured area(r=-0.934). Therefore, temperature compensation is needed to analyze the effects of other environmental factors on cambial electrical resistance changes. 2. If temperature is compensated for, the change of cambial electrical resistance is highly correlated to water vapor pressure(r=-0.836). 3. If temperature and humidity are compensated for, the change of cambial electrical resistance is highly correlated to intensity of light(r=-0.738). 4. Diurnal deviation of soil water potential is not more significantly related than the change of cambial electrical resistance. However, in the long-term, soil water potential and cambial electrical resistance are highly correlated(r=-0.831). This indicates that soil moisture significantly influences the long-term change of cambial electrical resistance.

• 한국정보통신학회논문지
• /
• 제5권7호
• /
• pp.1354-1360
• /
• 2001

카메라로 얻어진 화상을 근거로 계산된 속도분포를 시각정보로 이용하였으며, 이것으로부터 얻어진 대상물의 속도에 시선속도를 일치시켜 실험하였다. 즉 외란을 받은 환경에서도 안정된 화상을 얻기 위해서 외란이나 카메라 자체의 운동에 의해서 발생한 두부의 운동을 보상할 수 있는 눈의 운동이 필요하게 된다. 본 논문에서는 외란이 있는 환경에서 인간의 시선제어법 즉 시각과 평형각이 융합된 시선제어 알고리즘을 제안하고, 그에 대한 실험 결과에서 시각과 평형각이 융합된 시선제어가 시선제어만을 한 것과 비교하여 위치 편차가 적다는 것을 확인하였다. 이것은 카메라 받침대의 움직임이 각속도 센서에 의하여 보상되어 겉보기 속도가 적게 되어 속도의 추정오차도 적게 되는 효과가 있기 때문이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.96-98
• /
• 2005

In this paper, an algorithm to compensate the distorted signals due to Current Transformer(CT) saturation is suggested, First, DWT which can be easily realized by filter banks in real-time applications is used to detect a start point and an end point of the saturation. Secondly, For enough Datas those need to use the least-square curve fitting method, the distorted current signal is compensated by the AR(autoregressive) model using the data during the previous healthy section until pick point of Saturation. Thirdly, the least-square curve fitting method is used to restore the distorted section of the secondary current. Finaly, this algorithm had a Hadware test using DSP board(TMS320C32) with Doble test device. DWT has superior detection accuracy and the proposed compensation algorithm which shows very stable features under various levels of remanent flux in the CT core is also satisfactory. And this algorithm is more correct than a previous algorithm which is only using the LSQ fitting method. Also it can be used as a MU involving the compensation function that acquires the second data from CT and PT.