• 수산해양교육연구
• /
• 제19권3호
• /
• pp.510-516
• /
• 2007

The efficiency of magnetic compass direction sensor and magnetic compass by the laboratory experiment for the apparatus of generating artificial magnetic force and the onboard experiment on the fishing boat of coastal pot at the outside of Pusan Namhang were investigated. The results showed that the bearing angle of magnetic compass direction sensor was coincided with that of magnetic compass. However, the performance of magnetic compasses was unsuitable under the ISO rule by the characteristic experiment of damping curve. Therefore, the use of autopilot system using magnetic compass direction sensor which is based on the magnetic compass needs the sufficient notice.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.584-586
• /
• 2005

In this paper, low cost inertial sensor and compass were used instead of encoder for localization of mobile robot. Movements by encoder, movements by inertial sensor and movements by complementary filter with inertial sensor and compass were analyzed. Movement by complementary filter was worse than by only inertial sensor because of imperfection of compass. For the complementary filter to show best movements, compass need to be compensated for position error.

• 한국지능시스템학회논문지
• /
• 제25권1호
• /
• pp.48-56
• /
• 2015

본 논문에서는 지자기센서와 스마트폰을 사용하여 개인이동시스템(PMS)을 구현한다. 지자기센서를 사용한 PMS 제어 시스템은 탑승자가 원하는 방향으로 스마트폰을 향하게 하면 PMS는 탑승자가 원하는 방향으로 이동한다. 본 논문에서 제안한 스마트폰 제어 PMS는 지자기센서를 사용함으로써 버튼 조작에 의한 제어보다 더 직관적으로 PMS를 제어하므로 사용자에게 더욱 편리한 인터페이스를 제공한다. 그리고, PMS에 장착된 모터의 기계적 특성을 보정하기 위하여 지자기센서가 사용되었다. 또한, 본 논문은 지자기센서 기반의 PMS의 제어방법으로 절대방향과 상대방향 제어방법을 제안한다. 실험 결과로서 제안된 두 가지 방법으로 지자기센서 기반의 PMS가 편리하고 효과적으로 제어되었다.

• 전자공학회논문지SC
• /
• 제48권1호
• /
• pp.1-8
• /
• 2011

MR 센서에 의해 지구자기장의 세기를 측정하여 방위각을 결정하는 전자 Compass의 정밀도는 MR센서 및 OP-Amp.의 온도 Drift, DC Offset등 소자에 의한 오차, 측정주변 자성체에 의한 자기장의 왜곡, 및 Compass Tilt에 의한 오차 등의 영향을 받는다. 본 연구에서는 Set/Reset Pulse 방법에 의해 MR 센서 및 OP-Amp의 온도 Drift 및 DC Offset에 의한 오차를 해결하였고, 주변 자성체에 의한 자기장의 왜곡에 의한 오차를 Hard-Iron Calibration 루틴 수행에 의해 보상하였으며, Compass Tilt에 의한 오차를 Euler Rotational Equation에 의해 보상할 수 있는 3축 MR 센서 및 3축 Accelerometer를 기반으로 하는 전자 Compass 를 설계하였다. 특히 이와 샅이 설계한 전자 Compass를 가지고 3측 MR 센서의 서로 다른 Sensitivity와 OP-Amp.의 서로 다른 Gain등을 규준화하기 위한 Sensitivity Calibration 루틴 수행 시 Tilt의 발생으로 야기되는 오차를 정량적으로 분석하였으며, 이를 바탕으로 $1^{\circ}$정도(精度) Compass를 설계할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.118-124
• /
• 2008

Recently fishing industry is interested in efficiency and automation to acquire the international competitive power of national fishing industry. As an automation device of fishing boat, there are electric compasses using GPS and terrestrial magnetic sensor. Electric compass can be minimum size, high effectiveness with keeping the characteristic of a magnetic compass. This can be used a heading angle sensor to construct auto-navigation system in a small size ship. This paper develop electronic compass system that has serial output signal in NMEA 0183 and demonstrates the possibility of the electronics compass in navigation system for a small sized ship.

• 제어로봇시스템학회논문지
• /
• 제12권2호
• /
• pp.106-112
• /
• 2006

A new model for the continuous-magnetic interferences has been proposed in this paper to remove external interferes of magnetic field to the dual electric compass. By this removal, the dual electric compass can be used for proving the azimuth angle in an automobile navigation system instead of the rate gyroscope. In the navigation system with a GPS receiver, a DR sensor such as a rate gyroscope is needed to overcome the shielded areas, which is relatively expensive and requires frequent calibrations. However the dual electric compass designed by this research is cheap and provides absolute azimuth angle precisely, which is beneficiary to be used as a DR sensor. The main contribution of this paper is that the long-lasting magnetic interferences have been removed out by using the proposed model, which never be studied before. With a hybrid navigation system using a DR sensor, we demonstrated that dual electric compass is better than a rate gyroscope in terms of both economics and performances.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.182-188
• /
• 1994

In recent years, navigational and fisheries instruments are rapidly advancing. Especially data processing. data transferring and data interchange throughout the digital signals has been in high progress. Even though the ship's heading is also provided by a gyro-compass, an electro-magnetic compass studying by us currently is easy to issue adequate data to instruments requiring the information for the ship's heading. especially in small fishing boats. As the main element of the electro-magnetic compass is a three-axis magnetic sensors, the developing of the high performance sensor is in highly necessity in the beginning. This paper describes on the development of electro-magnetic compass of three-axis fixed type by using three-axis detection new type magnetic sensor without gimbals. even though usual electro-magnetic compass have to need necessarily a gimbal system in order to keep horizontal condition of the compass.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.132-138
• /
• 2009

In this paper, control of an omni-directional mobile robot is presented. Relying on encoder measurements to define the azimuth angle yields the dead-reckoned situation which the robot fails in localization. The azimuth angle error due to dead-reckoning is compensated and corrected by the magnetic compass sensor. Noise from the magnetic compass sensor has been filtered out. Kinematics and dynamics of the omni-directional mobile robot are derived based on the global coordinates and used for simulation studies. Experimental studies are also conducted to show the correction by the magnetic compass sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.381-382
• /
• 2007

Recently fishing industry is interested in efficient and automated fishing implementations to reach the level of the international leading technology. One of the important device used in fishing boat is an automated electric compass that harnesses the GPS and terrestrial magnetic sensor. The electric compass is desired to be minimized in size while keeping a high effectiveness in the characteristic of a magnetic compass. This device also can be used as a heading angle sensor to construct auto-navigation system in a small size of ships. However, there exists measurement errors induced from the slope of terrestrial magnetic sensor caused by the motion of boat. In this paper, a method has been proposed removing the measurement error arising from the slope of terrestrial magnetic sensor when the ship is in motion. We have designed a sensor with two DOF(degree of freedom) and a weight to maintain the horizontality of the sensor. Through this research, the hardware has been designed and also a test has been performed. The test shows a promissory result.

• 수산해양기술연구
• /
• 제31권4호
• /
• pp.385-392
• /
• 1995

The authors have been studying about and electro-magnetic compass with a three axis magnetic sensor in order to provide and accurate ship's magnetic heading which the compass deviations can automatically compensated in the compass itself, and the theory how to derive the poisson's coefficients from ship's magnetism measured with three axis magnetic sensor. This paper describes on the analysis of deviation derived from the measured values that obtained to measure the various magnetic fields at the compass position of the M. S. ARA, training ship of Cheju University with three axis magnetic sensor at Cheju near sea from 25th, Oct, to 13th, Nov. in 1994.