• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2599-2605
• /
• 2022

The Korea Retrospective Dosimetry network (KREDOS) performed an inter-laboratory comparison to confirm the harmonization and reliability of the results of retrospective dosimetry using mobile phone. The mobile phones were exposed to ¹⁹²Ir while attached to the human phantoms in the field experiment, and the exposure doses read by each laboratory were compared. This paper describes the reference dosimetry performed to present the reference values for inter-comparison and to obtain additional information about the dose distribution. Reference dosimetry included both measurement using LiF:Mg,Cu,Si and calculation via MCNP simulation to allow a comparison of doses obtained with the two different methodologies. When irradiating the phones, LiF elements were attached to the phones and phantoms and irradiated at the same time. The comparison results for the front of the phantoms were in good agreement, with an average relative difference of about 10%, while an average of about 16% relative difference occurred for the back and side of the phantom. The differences were attributed to the different characteristics of the physical and simulated phantoms, such as anatomical structure and constituent materials. Nevertheless, there was about 4% of under-estimation compared to measurements in the overall linear fitting, indicating the calculations were well matched to the measurements.

• 대한본초학회지
• /
• 제23권2호
• /
• pp.19-24
• /
• 2008

Objectives : The present study had been undertaken to investigate the effects of Cynomorii Herba and Eucommiae Cortex on treatment of osteoporosis in ovariectomized rats. Methods : In this experiment, the rats of experimental groups were ovariectomized. Rats of medicinal groups were administered by water extracts of Cynomorii Herba or Eucommiae Cortex. The levels of bone mineral density and body weight were measured. Results : The levels of spinal bone mineral density was significantly increased in comparison with OVX group at 8 weeks after medication in Cynomorii Herba group. The levels of femoral and fibula-tibial bone mineral density were not significantly increased in comparison with OVX group after medication in Cynomorii Herba and Eucommiae Cortex group. The levels of body weight were not significantly decreased in comparison with OVX group after medication in Cynomorii Herba and Eucommiae Cortex group. Conclusions : Reviewing these experimetal results, it appears that Cynomorii Herba have efficacy on treatment of osteoporosis. And further study should be conducted to illustrate in depth the curing and prevention of osteoporosis.

• 대한본초학회지
• /
• 제21권3호
• /
• pp.97-102
• /
• 2006

Objectives : The present study had been undertaken to investigate the effects of Trigonellae Semen on treatment of osteoporosis in ovariectomized rats. Methods : In this experiment, the rats were ovariectomized. Rats were administered by water extracts of Trigonellae Semen. The levels of bone mineral density and body weight were measured. Results : The levels of spinal bone mineral density was significantly increased in comparison with OVX group at 4 and 8 weeks after medication in Trigonellae Semen group. The levels of femoral and fibula-tibial bone mineral density were significantly increased in comparison with OVX group at 4 weeks after medication in Trigonellae Semen group. The levels of body weight was significantly increased in comparison with OVX group at 4 weeks after medication in Trigonellae Semen group. Conclusion : Reviewing these experimetal results, it appears that Trigonellae Semen have efficacy on treatment of osteeoporosis. And further study should be conducted to illustrate in depth the curing and prevention of osteoporosis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.110-117
• /
• 2004

The aim of a benchmark study is carried out nine methods are employed for ULS analysis which implicitly predict the ultimate strength of aluminium stiffened panels under axial compression. For this purpose, DNV PULS, experimental and numerical data on the ultimate strength of panels were collected. Comparison of these experimental / numerical, DNV PULS / numerical, results with theoretical solutions by the candidate methods is performed. Also it's compared that ALPS/ULSAP program is based on closed-form formula for the ULS of plates and grillages under axial compression. It is considered that ALPS/ULSAP methodology provides quite accurate and reasonable ULS calculations by a comparison with more refined FEA. Comparison of these experimental data, numerical, computational software results with the simplified solutions obtained by the candidate methods is then performed. The model uncertainties associated with the candidate methods are studied in terms of mean bias and COV (i.e., coefficient of variation) against experiments and numerical solutions, and the relative performance of the various methods is discussed.

• 대한한의학회지
• /
• 제25권2호
• /
• pp.77-86
• /
• 2004

Objectives: To study the features of appetite and dining habit according to Sasang constitution. The results of this study will be helpful to diagnose a Sasang constitution. Methods: There were 588 patients (248 men, 340 women) who answered questionnaire and were diagnosed by the Sasang Constitution Specialist at the Constitutional Clinic of Dongguk Bundang Oriental Hospital. Using the responses to the questionnaire and several statistical techniques such as homogeneity test and multiple comparison, we tried to find the characteristics of each constitution depending on its dining behavior. Results & Conclusions: As a result of the analysis of the questionnaire, Taeumin and Soyangin have a heavy appetite (p<0.01), but the appetite of Soyangin and Soeumin tends to be irregular (p<0.01). Especially, the appetite of Soeumin tends to change according to his feelings (p<0.0I). Taeumin and Soyangin eat more and faster in comparison with Soeumin (p<0.01).

• 품질경영학회지
• /
• 제33권3호
• /
• pp.59-70
• /
• 2005

The purpose of this research is to identify the impact of trust on user acceptance of mobile banking and to identify if causalities among these factors are different between Internet and mobile banking. To test this model, this research applies the technology acceptance model(TAM) that incorporates trust. Additionally, this research use structural equation modeling to test the model and examine cross-group differences using a multi-group comparison method. The empirical results indicate that all path is significant expect the path from trust to intention to use. The results of a multi-group comparison test indicated that the path from trust to attitude, from trust to intention to use, from perceived usefulness to attitude and from perceived to intention to use are different between Internet and mobile banking.

• 한국의류학회지
• /
• 제25권5호
• /
• pp.957-968
• /
• 2001

The purpose of this study was to extend the social comparison theory in an attempt to examine the effect of TV media on adolescent body images. The research was a survey and the subjects were 895 male and female adolescents in Taejon, Korea. The measuring instruments were 2 sets of stimuli of male and female body silhouettes and self-administrated questionnaire. Results were as follows: 1) The subjects TV viewing periods were 3∼4 hours per day and their involvements in TV media were moderate degree. 2) The results of perceptual body images showed that adolescent favored thin body type as an ideal body and had distorting tendency that their bodies were larger than the actual sizes. 3) The results of attitudinal body images showed three factors such as \"appearance evaluation\", \"appearance orientation\", and \"fitness orientation\". 4) TV media had significant effects on perceptual and attitudinal body images. It is concluded that the results of this study support social comparison theory that people compare themselves to others to satisfy their needs for self-evaluation and for judgments of their own personal worth since TV media give strong influence on adolescents through presenting social comparison models to body images.

• International Journal of Quality Innovation
• /
• 제7권1호
• /
• pp.90-97
• /
• 2006

The process of producing software differs in many aspects from that of traditional manufacturing. Software is not manufactured in the classical sense. Development of software more closely resembles the development effort that goes into design new product [1-3]. In this article, we first describe the foundations of process improvement, which all processes can share. The process improvement differences between software and manufacturing process are then discussed, and a defect driven process inspection and improvement is introduced. Based on the discussion, two experiments were designed and the results of the results were collected. Through the comparison, we found that some efficient quality improvement approaches can be easily adapted in the software improvement and that the inspection efficiency is also significant.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.146-150
• /
• 2014

The objective of this paper is to provide a comparison between two transverse flux rotary machines (TFRM) with different topologies of stator cores. Depending on how to make stator core with laminated steel sheets, the one topology is 'perpendicular stacking core' and the other is 'separated core'. Both of the two cores have been designed considering 3-dimensional (3-D) magnetic flux path with the same output power conditions, but the core losses are quite different and it causes different magnetic and thermal characteristics. For comparison of these two topologies of stator cores, therefore, core losses have been calculated and used as a heat source in no-load conditions, and the thermal stress has been also calculated. 3-D finite element method has been used for the magnetic field, thermal, and stress analysis to consider the 3-D flux path of the TFRM. After comparing the analysis results of the two topologies, experimental results are also presented and discussed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.121-127
• /
• 2001

To investigate the stability and integrity of offshore structures, it is necessary to estimates the significant ocean environmental loadings. They include hydrostatic pressure, wind, wave, current, tide, ice, earthquake, temperature, marine growth and scouring. Waves are of major importance among them because of the large forces acting on submerged parts of the structure caused by accompanying water motions. For the comparison of stress and deflection analysis tools, a vertical pile is applied under environmental loads. The analysis is concerned with SACS(Structural Analysis Computer System), ANSYS and C program. SACS and C program have nearly the same results but not ANSYS. This study shows the comparison of results obtained from 3 different approaches.