• Journal of The Korean Association For Science Education
• /
• v.22 no.5
• /
• pp.1082-1102
• /
• 2002

Most of comparative studies in science teacher education so far have been conducted in terms of teacher education policy, pre- and in-service training system and curriculum, and certificate system. While such superficial information can be readily obtainable, it does not necessarily enable us to make access to reality of science teachers' professional development in respective countries, because practice in professional development among science teachers is deeply embedded into respective socio-cultural environment or climate. In order to get information on reality in science teachers' professional development, alternative approaches of research should be developed. This paper aims at pursuing an alternative way to approach reality of Japanese science teachers' professional development. An email survey of free description method with 29 in-service science teachers with a variety of years of experience in Ibaraki Prefecture, Japan, revealed that Japanese science teachers have developed their expertise through very close daily-based communication with their peer science teachers. At least, within their consciousness, neither formal in-service training programs, nor pre-service training programs have had much stronger effects on their professional development than such non-formal, daily-based, deep, apprenticeship-typed or in some sense, family-typed communication. The results suggest that in order to conduct meaningful comparative studies, we should take much more attention to how to make access to reality of science teachers' professional development.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.80-87
• /
• 2002

A comparative study using electron-beam(EB) and thermal curing techniques was carried out to determine the effect of cure behavior and thermal stability of epoxy resins. In this work, benzylquinoxalinium hexafluoroantimonate(BQH) was used as a latent cationic catalyst for an epoxy resin. According to the thermogravimetric analysis(TGA), the decomposed activation energy based on Coats-Redfern method was higher in the case of thermal curing technique. This could be interpreted in terms of slow thermal diffusion rate resulted from high crosslink density of the thermally cured epoxy resin. However, the increase of hydroxyl group in the epoxy resin cured by EB technique was observed in near-infrared spectroscopy(NIRS) measurements, resulting in improving the stable short aromatic chain structure, integral procedural decomposition temperature, and finally ductile properties for high impact strengths.

• Hwankyungkyoyuk
• /
• v.18 no.1 s.26
• /
• pp.97-109
• /
• 2005

This study was motivated to understand ways in which actors (students) perceived internal and external conditions of actions in determining responsibility of so-called environment friendly actions. To understand hidden reasons by which students conduct specific environmental actions more or less frequently may be more important and meaningful for environment teachers than to measure and know the frequency that their students do such actions. This study has been implemented by applying questionnaire survey to 752 ruddle school and high school students and 211 environment teachers. To test the hypothesis of this study that there would be significant differences in awareness of environment friendly actions and barriers to implementing those actions between students and environment teachers, frequency analysis and f-test have been conducted. Primary results of this study can be summarized as follows; It has been found that there were a number of evidences showing significant differences in awareness of environment friendly behavior between students and teachers. In term of action frequency, significant differences have been observed in 11 of the listed 20 actions. Similar resulted have been found in terms of perceived difficult, perceived effectiveness, and perceived guilty. These results seem to support an argument that the current list-making and checklist style of connecting students to so-called environment friendly actions need to be reviewed in a critical manner.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.47-52
• /
• 1999

Comparative effects of phosphine fumigation and gamma irradiation were evaluated on the qualities of white ginseng prepacked in a commercial laminated film in terms of water absorption, Hunter color parameters(L, a, b) and organoleptic properties(overall color/appearance, flavor) during 6 months of storage at ambient(20oC, 70% RH) and accelerated(40oC, 90% RH) conditions. Moisture content of packed white ginseng(initial 8.44%) linearly increased with storage period, thereby reaching to about 10% (r=0.9966) in ambient and more than 15%(r=0.9886) in accelerated conditions, respectively, at the 6th month of storage. The storage at severe conditions resulted in remarkable changes in Hunter's color values, decrease in whiteness(L) and increase in redness(a) and yellowness(b), while both treatments, phosphine and irradiation less than 5kGy, did not cause any significant changes in color parameters. Phosphine fumigation was shown detrimental to overall flavor of white ginseng(p<0.01), however or ganoleptic qualities of stored samples were effectively maintained by irradiation less than 5kGy(p< 0.05). As the index on the guality of white ginseng stored at severe conditions its organoleptic quality was highly correlated with moisture content(r= 0.9777) and Hunter color values(over 0.9), suggesting the critical values of 15.5% moisture and 72.56, 7.15, 21.45 in Hunter's L, a, b values, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.12
• /
• pp.693-699
• /
• 2013

This paper describes a method for size optimization of the major design variables for solar water heating systems at the stage of concept design. The widely used RETScreen simulation tool was used for optimization. Currently, the RETScreen tool itself does not provide a function for optimization of the design parameters. In this study, an optimizer was combined with the software. A comparative study was performed to evaluate the RETScreen-based approach with the case study of a solar heating system in an office building. The optimized results using the RETScreen model were compared to previously published results with the TRNSYS model. The objective function of the optimization is the life-cycle cost of the system. The optimized design results from the RETScreen model showed good agreement with the optimized TRNSYS results for the solar collector area and storage volume, but presented a slight difference for the collector slope angle in terms of the converged direction of the solutions. The energy cost, life-cycle cost, and thermal performance regarding collector efficiency, system efficiency, and solar fraction were compared as well, and the RETScreen model showed good agreement with the TRNSYS model for the conditions of the base case and optimized design.

• Korean Journal of Social Welfare
• /
• v.49
• /
• pp.162-189
• /
• 2002

In general, every welfare state is to be productive. If not, the welfare state itself cannot be sustainable because resource for the development of welfare only comes from a sound level of economic development However, how to mix welfare and production differs from country to country. This article tackles this phenomenon as a starting point. Granted, contemporary studies of comparative welfare state often starts from the theory of welfare regime which has been suggested by Esping-Andersen. This article also regards the framework as an analytic tool to elaborate upon the concept of productive welfare and to categorize different types of conception of productive welfare. In liberal regime, the concept is so narrowly interpreted that they emphasize micro-efficiency of specific welfare programs. On the contrary, the other two regime types recognize the concept of productive welfare as relatively wide. Therefore, conservative and social democratic regimes underscore macro-efficiency of the welfare state as a whole. Empirical analyses of this article explores each regime's success and failure in terms of achieving fundamental goals of the welfare state, i.e. economic development and enhancement of equality. A series of evidence show that liberal regime fails in achieving both goals, while the other two regimes seem to be relatively successful. In conclusion, it may be pointed out that current tendency of neo-liberalism and anti-welfarism in Korea should be overcome, which must be the prime task of social welfare academia of this country.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.285-291
• /
• 2009

In this paper, comparative analysis of offset voltage PWM method and $V_{max}-V_{mid}$ PWM method for three-phase matrix converter is addressed by using a simple analytical and graphical method. Offset voltage PWM method calculates PWM patterns in terms of offset voltage and variable slope of carrier, and it simplifies matrix converter modulation algorithm significantly. $V_{max}-V_{mid}$ PWM method generates patterns by using two phases and maintaining a remaining phase to base phase, and it is implemented in the industrial products. The most important performance criterion of modulation method is a magnitude of current ripples and it is analytically modelled. The graphical illustration of theses complex multivariable functions make per-carrier cycle and per fundamental cycle behavior of two PWM methods understood. Two modulation methods are analysed with the analytical formulas and graphics, and the analysis shows offset voltage PWM method is superior to $V_{max}-V_{mid}$ PWM method with respect to input current ripples and output voltage ripples.

• IE interfaces
• /
• v.10 no.3
• /
• pp.75-93
• /
• 1997

Unlike individual applications, it is extremely hard to obtain user requirements for group systems, since there exists very complicated dynamics in group. This may result in spreading a great amount of products with a broad range of contents. Thus, this study presents a comparative analysis of groupware products. As a result, these products have been categorized into three areas which include cooperation/document management systems, collaborative writing systems, and decision-making/meeting systems. While the systems reviewed here focus on the cooperation/document management systems, the other two areas will be dealt in details in part Ⅱ. The first area ends up with two large categories such as proprietary groupware products and intranet groupware products. However, it has been observed that there is a natural convergence between these two categories. Consequently, the comparative analysis has been performed in terms of functions provided on the two categories and a combined category. Each group of the functions has been divided into three parts which consist of basic functions, quasi-basic functions, and others. Such a decision has been made based on the frequency rate of the functions provided in the products. With a more strict rule, the basic functions comprise electronic mail, sanction, bulletin board, document management, scheduling, security, Web browser, and Internet connectivity. This study also provides a framework for integrated functional model of groupware systems. The basic functions are merged into the model. However, the model is so flexible that it can partially include the quasi-functions in addition to the basic functions. In the future, it is expected that a large number of products will stem from the modification of the functional model.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.152-155
• /
• 2011

This paper presents a comparative analysis on step and the touch voltages generated by either a sine and a ring wave voltage generator; this analysis was done as a basic study in order to develop a small and lightweight ground meter. A ring wave generator using pulsed power technology was fabricated; an experimental grounding system specified in Institute of Electrical and Electronics Engineers standards 80 and 81 was installed. The step and the touch voltages, which were measured using comparable a sine and a ring waves in terms of magnitude and frequency, were equal. Using pulsed power technology, the weight of the fabricated ring wave generator could be reduced to one-fifth of that of a sine wave generator. Consequently, if a ground meter adopts the ring wave instead of a sine wave, it will be possible to reduce the weight of a ground meter and improve the efficiency of measurement.

• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.667-689
• /
• 2014

Structural walls (also known as shear walls) are one of the common lateral load resisting elements in reinforced concrete (RC) buildings in seismic regions. The performance of RC structural walls in recent earthquakes has exposed some problems with the existing design of RC structural walls. The main issues lie around the buckling of bars, out-of plane deformation of the wall (especially the zone deteriorated in compression), reinforcement getting snapped beneath a solitary thin crack etc. This study compares performance of a typical wall designed by different standards. For this purpose, a case study RC shear wall is taken from the Hotel Grand Chancellor in Christchurch which was designed according to the 1982 version of the New Zealand concrete structures standard (NZS3101:1982). The wall is redesigned in this study to comply with the detailing requirements of three standards; ACI-318-11, NZS3101:2006 and Eurocode 8 in such a way that they provide the same flexural and shear capacity. Based on section analysis and pushover analysis, nonlinear responses of the walls are compared in terms of their lateral load capacity and curvature as well as displacement ductilities, and the effect of the code limitations on nonlinear responses of the different walls are evaluated. A parametric study is also carried out to further investigate the effect of confinement length and axial load ratio on the lateral response of shear walls.