• 한국음향학회지
• /
• 제18권3호
• /
• pp.17-26
• /
• 1999

We present the first speech coarticulation database of Korean, English and Konglish/sup 3)/ named "SORIDA"/sup 4)/, which is designed to cover the maximum number of representations of coarticulation in these languages [1]. SORIDA features a compact database which is designed to contain a maximum number of triphones in a minimum number of prompts. SORIDA contains all consonantal triphones and vowel allophones in 682 Korean prompts of word length and in 717 English prompt words, spoken five times by speakers of balanced genders, dialects and ages. Korean prompts are synthesized lexicons which maximize their coarticulation variation disregarding any stress phenomena, while English prompts are natural words that fully reflect their stress effects with respect to the coarticulation variation. The prompts are designed differently because English phonology has stress while Korean does not. An intermediate language, Konglish has also been modeled by two Korean speakers reading 717 English prompt words. Recording was done in a controlled laboratory environment with an AKG Model C-100 microphone and a Fostex D-5 digital-audio-tape (DAT) recorder. The total recording time lasted four hours. SORIDA CD-ROM is available in one disk of 22.05 kHz sampling rate with a 16 bit sample size. SORIDA digital audio-tapes are available in four 124-minute-tapes of 48 kHz sampling rate. SORIDA′s list of phonetically-rich-words is also available in English and Korean.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1388-1395
• /
• 2017

The Helically coiled tube Once-Through Steam Generator (H-OTSG) is a key piece of equipment for compact small reactors. The present study developed and verified a thermal-hydraulic design and performance analysis computer code for a countercurrent H-OTSG installed in a small pressurized water reactor. The H-OTSG is represented by one characteristic tube in the model. The secondary side of the H-OTSG is divided into single-phase liquid region, nucleate boiling region, postdryout region, and single-phase vapor region. Different heat transfer correlations and pressure drop correlations are reviewed and applied. To benchmark the developed physical models and the computer code, H-OTSGs developed in Marine Reactor X and System-integrated Modular Advanced ReacTor are simulated by the code, and the results are compared with the design data. The overall characteristics of heat transfer area, temperature distributions, and pressure drops calculated by the code showed general agreement with the published data. The thermal-hydraulic characteristics of a typical countercurrent H-OTSG are analyzed. It is demonstrated that the code can be utilized for design and performance analysis of an H-OTSG.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.393-401
• /
• 2006

The influences of stress triaxiality on ductile fracture have been investigated for various specimens and structures. With respect to a transferability issue, recently, the interests on local approaches reflecting micromechanical specifics are increased again due to rapid progress of computational environments. In this paper, the applicability of the local approaches has been examined through a series of finite element analyses incorporating modified GTN and Rousselier models as well as fracture toughness tests. The ductile crack growth of nuclear carbon steels is assessed to verify the transferability among compact tension (CT) specimens with different in-plane size. At first, the basic material constants were calibrated for standard CT specimens and used to predict fracture resistance (J-R) curves of larger CT specimens. Then, the in-plane size effects were examined by comparing the numerically estimated J-R curves with the experimentally determined ones. The assessment results showed that the in-plane size effect should be considered for realistic engineering application and the damage models might be used as useful tool for ductile fracture evaluation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권3호
• /
• pp.143-151
• /
• 2004

High-speed permanent magnet machines are likely to be a key technology for electric drives and motion control systems for many applications, since they are conductive to high efficiency, high power density, small size and low weight. In high-speed machines, the permanent magnets are often contained within a retaining sleeve. However, the sleeve and the magnets are exposed to high order flux harmonics, which cause parasitic eddy current losses. Rotor losses of high-speed machines are of great importance especially in high-speed applications, because losses heat the rotor, which is often very compact construction and thereby difficult to cool. This causes a danger of demagnetization of the NdFeB permanent magnets. Therefore, special attention should be paid to the prediction of the rotor losses. This paper is concerned with the rotor losses in permanent magnet high-speed machines that are caused by permeance variation due to stator slotting. First, the flux harmonics are determined by double Fourier analysis of the normal flux density data over the rotor surface. And then, the rectilinear model was used to calculate rotor losses in permanent magnet machines. Finally, Poynting vector have been used to investigate the rotor eddy current losses of high-speed Permanent magnet machine.

• ETRI Journal
• /
• 제36권1호
• /
• pp.89-98
• /
• 2014

The integration of digital circuits has a tight relation with the scaling down of silicon technology. The continuous scaling down of the feature size of CMOS devices enters the nanoscale, which results in such destructive effects as short channel effects. Consequently, efforts to replace silicon technology with efficient substitutes have been made. The carbon nanotube field-effect transistor (CNTFET) is one of the most promising replacements for this purpose because of its essential characteristics. Various digital CNTFET-based circuits, such as standard logic cells, have been designed and the results demonstrate improvements in the delay and energy consumption of these circuits. In this paper, a new CNTFET-based 5-input XOR gate based on a novel design method is proposed and simulated using the HSPICE tool based on the compact SPICE model for the CNTFET at the 32-nm technology node. The proposed method leads to improvements in performance and device count compared to the conventional CMOS-style design.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.103-111
• /
• 1990

본 연구에서는 성장하는 균열선단에서 열림변위의 임계증분에 대한 균열성장 조건에 기본을 두고 계산된 파단하중을 실험결과와 비교하여 균열성장저항을 특성 지 을수 있는 새로운 재료상수를 제안한 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.554-557
• /
• 2008

In this study, two types of central flow distributor designs are presented and compared to obtain the optimal compact design which has the least flow resistance and the uniform flow distribution in a vehicular fuel cell stack. For effective and reliable prediction on the thermo-flow characteristics of the reactants flow over the entire fuel cell stack domain, open channel flow in the bipolar plates of the power generating cells were simulated by applying a simplified flow resistance model with an empirical porous concept. A number of case studies were performed to figure out an optimal configuration of a central flow distributor device in terms of the time-dependent thermo-flow behavior and load-dependent flow distribution. The results showed that the stable and load-independent thermo-flow uniformity is very design specific, which is closely associated with the design of central manifolding devices in order to achieve the enhanced volumetric power density and the reliable long-lasting operating of fuel cells.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1128-1131
• /
• 2004

SFF(solid freeform fabrication) is another name of RP(rapid prototyping). The SFFS for office type wishes to develop system that can produce small object such as hand phone, cup, accessory etc. with high speed, and also intend suitable system in office environment by compact design, and buy easily by inexpensive price. As can manufacture high speed in existent SFF process technology, representative process that have competitive power in price is 3DP (three dimensional printing) technology. The 3DP technology is way to have general two dimensional printing technology and prints to three dimension, is technology that make three-dimensional solid freeform that want binder doing jetting selectively on powder through printer head. We designed and manufactured SFFS for office based on 3DP process technology design and manufactured, and composed head system so that use 3 printer heads at the same time to improve the fabrication speed of system. We used printer head of INCJET company and cartridge used HP45 series model who can buy easily in general city. And we directly fabricated three dimensional solid freeform using developed SFFS for office type.

• 전산구조공학
• /
• 제9권4호
• /
• pp.127-134
• /
• 1996

본 논문은 경계요소법에 의한 콘크리트의 진행성 파괴해석에 관한 연구이다. 콘크리트의 파괴진행해석을 위하여 경계요소법에 의한 변위 및 표면력 경계 적분방정식으로부터 균열을 포함한 연속체의 균열 경계적분 방정식을 정식화하였다. 콘크리트의 균열진행을 해석하기 위하여 균열 선단에서의 파괴진행영역을 Dugdale-Barenblatt형 모델을 사용하여 모델링하였고 균열진행영역의 인장연화상태를 선형으로 가정하여 모델링하였다. 정식화된 경계적분방정식에 의한 콘크리트 보와 여러가지 하중상태에 있는 인장시편에 대한 진행성 파괴해석을 실시하였으며 해석치와 실험치의 비교로부터 경계요소법에 의한 진행성 파괴해석방법은 최대하중 및 최대하중 이후의 거동을 포함한 콘크리트 구조물의 비선형 거동을 잘 예측함을 보여주고 있다 .

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.104-109
• /
• 2002

In this paper, a statistical analysis of fatigue crack growth behavior under constant amplitude loads has been carried out. Fatigue crack growth tests were conducted on sixteen pre-cracked compact tension (CT) specimens of the pressure vessel (SPV50) steel in controlled identical load and environmental conditions. The assessment of the statistical distribution of fatigue crack growth experimental data obtained from SPV50 steel was studied and also the correlation of the parameter C and m in the Paris-Erdogan law was discussed. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Weibull. The fatigue crack growth rate seems to follow the 3-parameter Weibull and the log-normal distribution. The coefficient of variation (COV) of fatigue crack growth life was observed to decrease as the crack grows. A strong negative linear correlation exists between the coefficient C and the exponent m in Paris model. Fatigue crack growth rate data shows a normal distribution for both m and logC.