• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.58-67
• /
• 2019

This study presents a new portable eight-output light emitting diode (LED) driver. The eight output-channels are divided into two equal groups, and their output powers can be controlled individually by three active switches. In addition, a simple capacitor-based passive current balancing circuit (CBC) is employed in each port to guarantee that the currents of the four LEDs are the same. When compared with the conventionally used separate two-output isolated converters, the proposed one uses one less active switch. Moreover, zero-voltage-switching (ZVS) is achieved, which improves the power efficiency of the driver. Finally, a highly compact prototype is built, which can reach an efficiency of 94.6%.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.104-113
• /
• 2022

We present a method to count the overall length of the zoom system in an initial design stage. In a zoom-lens design using the concept of the group, it has been very hard to precisely estimate the overall length at all zoom positions through the previous paraxial studies. To solve this difficulty, we introduce T_eq as a measure of the total track length in an equivalent zoom system, which can be found from the first order parameters obtained by solving the zoom equations. Among many solutions, the parameters that provide the smallest T_eq are selected to construct a compact initial zoom system. Also, to obtain an 8× four-group zoom system without moving groups, tunable polymer lenses (TPLs) have been introduced as a variator and a compensator. The final designed zoom lens has a short overall length of 29.99 mm, even over a wide focal-length range of 4-31 mm, and an f-number of F/3.5 at wide to F/4.5 at tele position, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.30.2-30.2
• /
• 2021

The extended Lyα nebulae (also known as Lyα blobs or LABs) observed at z=2-6 can provide clues to galaxy formation in the early universe. The connection of LABs with the overdensities of compact Lyα emitters suggests that they are associated with matter density peaks in the universe and thus likely to evolve into the present-day groups and clusters of galaxies. However, the mechanism powering the extended Lyα emission in LABs is remained controversial. The detection of polarization signals that follow the theoretically predicted trend is interpreted as strong evidence supporting that the LABs are caused primarily by the resonance scattering of Lyα originating from star-forming galaxies and AGNs. However, Trebitsch et al. (2016) claimed that the radial profile of polarization could be better explained by the scenario in which Lyα photons are produced in the cooling gas surrounding galaxies and then self-scattered by the gas, rather than by the scattering scenario of photons originating from the central galaxies. In this presentation, using LaRT, a state-of-art Lyα radiative transfer code, it is demonstrated that the observed polarization pattern can be reproduced even with the scattering scenario.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.185-194
• /
• 2016

This paper presents the finite element method results for HSS(Hollow Square Section) steel columns strengthened with Carbon Fiber Reinforced Polymer Plastic(CFRP) sheets. 6 specimens were fabricated and the specimen groups were non-compact short columns, slender short columns, and non-compact long columns. Test parameter was the number of CFRP ply. The finite element analysis was performed by using ANSYS Workbench V.14.0 and the results of FEM were compared with those of Test for failure mode, load-displacement curve, maximum load, and initial stiffness. The comparisons between experimental observations and computed results show that the analyses provided good correlation to actual behavior. Finally, the buckling stress were calculated according to the AISC cold-formed structure provision and the retrofitting effect were verified for each section type.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.506-509
• /
• 2002

An optical system for a stereoscopic video recorder is designed with the field of view 42$^{\circ}$ and effective diameter 22 mm. We can use it by attaching it to the front lens of any video camera or camcorder to record a stereoscopic scene. This system is a double Kepler type afocal system to make the image erect and a bi-ocular type to record and display the stereoscopic scene. The optical tube length is folded with several flat mirrors and a beam splitter to be compact. This optical system is composed of 4 groups of lenses and each group serves as a relay lens for minimizing the vignetting effect. Whole field stereoscopic scenes may be captured by perpendicularly polarized alternated recording with a chopper and two perpendicular polarizers, without any loss of light energy. The displayed images may be seen stereoscopically with polarized spectacles and are kinetic because of an afterimage effect.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.2
• /
• pp.213-218
• /
• 2001

Presented are the STM images of self-assembled monolayer of 2-mercaptoethanol on Au(111). Striped structures of ($6{\times}3_{\frac{1}{2}}$), ($5{\times}3_{\frac{1}{2}}$), ($4{\times}3_{\frac{1}{2}}$) and compact-($5{\times}3_{\frac{1}{2}}$) were observed after annealing at $80^{\circ}C.$ Analysis of the ordered structures revealed that the basic fundamental units of the ordered structures were three crystallographically non-equivalent ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$) $R30^{\circ}$ assemblies, and that the way of combination of the assemblies produced the four different structures. The($6{\times}3_{\frac{1}{2}}$) structure ( $\theta$ = 0.33) was composed of one ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$)$R30^{\circ}$ assembly, while the ($5{\times}3_{\frac{1}{2}}$) ( $\theta$ = 0.30) and ($4{\times}3_{\frac{1}{2}}$) ( $\theta$ = 0.38) structures were consisted of two ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$) $R30^{\circ}$ assemblies, separated by 5a and 4a, respectively. Furthermore, the compact-(5X 3½) structure ( $\theta$ = 0.50) was obtained by overlapping three ($3_{\frac{1}{2}}{\times}3_{\frac{1}{2}}$) $R30^{\circ}$ assemblies. In spite of the diversity in the adsorption structures, all the adsorption sites of 2-mercaptoethanol were fundamentally identical. On the other hand, the unannealed primitive SAM of 2-mercaptoethanol was characterized by two observations: a short-range order keeping the adsorbed molecules at approximately $3_{\frac{1}{2}}$ a and the small domains of the striped structures supporting that the observed surface structures on the annealed surface were the extension of the primitive layer of 2-mercaptoethanol. Comparing these observations with the already published structures of ethanthiol, it was concluded that the interaction between the hydroxyl groups of 2-mercaptoethanol might play a significant role in the adsorption step of 2-mercaptoethanol on Au(111) to organize the adsorption structures different from those of ethanthiol.

• Microbiology and Biotechnology Letters
• /
• v.50 no.1
• /
• pp.147-156
• /
• 2022

Urinary tract infections (UTIs) are one of the most common infections in different age groups, including children. Bacteria are the main etiological agents of UTIs. The aim of the present study was to isolate, identify, and determine the antibiotic susceptibility of bacteria isolated from children with UTIs from Baghdad, Iraq. Three hundred and two urine samples were collected from children aged 6 months to 12 years. The samples were cultured on blood agar and MacConkey agar. The selected colonies were subjected to biochemical tests and antibiotic susceptibility analysis using the Vitek^® 2 Compact automated microbial identification system. In this sample, 299 bacteria were identified, of which, 267 were gram-negative bacteria, and 32 were gram-positive bacteria. Escherichia coli (56%) was the most commonly isolated gram-negative bacteria, followed by Pseudomonas aeruginosa (14%), Enterobacter spp. (10.48%), Klebsiella pneumoniae (9.36%), Proteus spp. (7.8%), Acinetobacter baumannii (1.5%), and Morganella morganii (0.37%). Enterococcus faecalis (62.5%) was the most commonly detected gram-positive bacteria, followed by Staphylococcus aureus (37.5%). E. coli and P. aeruginosa were the most antibiotic-resistant bacteria. Among the tested antibiotics, meropenem showed 100% sensitivity, followed by imipenem (97.4%), amikacin (91.8%), and tobramycin (83.5%). In contrast, the high frequencies of resistance were observed with cefixime (93.2%), cefotaxime (78.7%), and ceftriaxone/cefotaxime (71.2%). In conclusion, carbapenems and aminoglycosides are highly recommended for the empirical treatment of UTIs, while, Quinolones, penicillins, and cephalosporins are not suggested. Frequent antibiotics susceptibility testing are warranted to determine the resistance pattern of UTI bacteria.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.27-32
• /
• 2020

This paper compare the adaptive equalization performance according to the values of adaptive step variation speed for adapting in VS-CCA (Variable Stepsize-Compact Constellation Algorithm) based on nonlinear function function of error signal. The VS-CCA algorithm compacts the 16-QAM nonconstant modulus signal into the 4 groups of 4-QAM constant modulus signal constellation in quadature plane, then the error signal is generated using the constant modulus of transmitted signal statistics. The adaptive equalizer coefficient were updated in order to achieve the minimum cost function by varying step based on the nonlinear function of error signal. In this time, the instantaneous adaptive step is determined according to the value of step variation speed of nonlinear function and the different equalization performance were obtained according to the step variation speed value. The equalizer internal index and external index which represents the robustness of external noise were used for the performance comparison index. As a result of computer simulation, it was confirmed that the value of variation speed less than 1.0 give more superior in every performance index compared to the greater than 1.0 in steady state.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.549-558
• /
• 1998

O-Antigenic part of Campylobacter jejuni gram negative bacteria was reported to consist of a repeated trisaccharide unit. The disaccharides, GlcNAc-Gal derivatives, as key intermediates for the synthesis of trisaccharide repeating units were synthesized. At the $\beta(1{\to}3)$ glycoside bond formation step between 3,4,6-tri-O-acctyl-2-deoxy-2-N-phthalimido-${\beta}$-D-glucopyranosyl bromide and galactosyl acceptors, high regioselectivities between 2, 3, and 4-OH groups of galactosyl acceptors were found. As a result, no further selective protection steps for OH groups of galactosyl acceptors was necessary, and more effective and compact synthetic scheme was achieved.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.308-313
• /
• 2005

The effects of molecular environments on photoisomerization of an azobenzene group were investigated using In-situ UV/Vis spectroscopy and optical anisotropy measurement technique. The reversible and repeatable photoisomeritation reactions of azobenzene were observed by irradiating the film containing 4-hydroxyazobenzene and by measuring absorption intensities of the characteristic bands of trans and cis isomers simultaneously. When the self-assembled monolayer with azobenzene groups was used as an alignment layer for a liquid crystal cell, the homeotropic alignment was induced due to their compact packing structures of azobenfene groups along the vertical direction of the substrate. By irradiating UV light on this cell, the trans-azobenzene groups change to cis-isomers through the photoisonlerieation and then resulting in the planar alignment of liquid crystal molecules.