• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.870-878
• /
• 2009

The large increase in the use of electricity has resulted in an ever-growing electric power demand. It has created the need for the construction of power transmission facility located close to the load centers and it also has to require wide right-of-way and large lots, that are not always available, for especially the installation of the towers. The difficulties in acquiring right-of-way have put pressure on energy companies to either upgrade a line on an existing right-of-way to higher voltage or build a new line on a narrow right-of-way. This paper presents the design of a compact tower with polymer Insulation arm, in order to reduce the separation between phases. the compact tower can be built on a narrow right-of-way. the compact tower can be designed based on 345 kV Tower regarding electrical clearances and right of way, therefore the conventional 154 kV Tower can be upgrading transmission line voltages have moved to 345 kV levels.

• 감성과학
• /
• 제15권2호
• /
• pp.317-327
• /
• 2012

This paper uses the sensibility engineering method to find the model of automobile most appealing to buyers in the $4^{th}$ and $5^{th}$ tier cities of China. Samples of class A & A0 cars were shown to 96 subjects in those cities to investigate their responses in relation to the concepts 'modern' and 'smart'. The result shows that even though men tend to be more sensitive to automobile models in general than women are, both genders showed similar responses to specific models when they were asked to identify a model 'magnificent', 'modern', 'lively', 'smart' or 'cute'. This implies that despite the gender differences in terms of aesthetic sensitivity, both men and women share similar taste in relation to the appearance of cars. Apart from aesthetics, however, men tend to pay a greater attention to the details of design and material used for the cars, while women tend to pay attention to higher priced and better looking cars.

• 한국멀티미디어학회논문지
• /
• 제11권6호
• /
• pp.835-844
• /
• 2008

ZigBee devices are limited in resources especially on power and computational capacity but also require real-time operation at MAC layer. Therefore, it is important to take those requirement into consideration of system software design. In this paper, we proposed a compact system software design to support simultaneously ZigBee and IEEE802.15.4. The design strictly respects the resource and real-time constraints while being optimized for specific functions of both Zigbee and IEEE802.15.4. Various evaluations are done to show significant metrics of our design.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.645-650
• /
• 2010

The continuous increase demand for electric power leads to the additional construction of transmission facilities, but it is not easy to acquire right-of-way for transmission facilities. Therefor, there is a need for compact tower that can be built on a narrow right-of-way the compact tower with polymer insulation arm is a solution. It can be upgrading conventional 154 kV transmission line voltages to 345 kV levels. However transmission voltage is increasing, environment interference (corona noise, radio interference, etc.) will occur gradually. This environment interference is depending on the electrical clearances of tower and configuration of conductors. Therefore the analysis of the factors of environmental interference is necessary in order to upgrading transmission voltage. This paper presents the design factor of a compact tower to meet the environmental interference standard.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.436-437
• /
• 2011

Before 1970s, 154kV substations in Korea were built in outdoor steel structure types only. In early 1970s, Germany developed GIS and the first indoor GIS type substation was built in Korea in 1980. In 1998, 154kV indoor type substations were standardized into regular type and urban type which applied steel frames to structures. In 2002, this was re-standardized into five different types in detail. In 2009, 154kV compact substation design was developed and standardized and saved about 20% of the construction cost with new technology and methods. Compact substations were classified into three types ; urban type, multi-function type, and regular type. The first urban type compact substation, Jang-ki substation, was built in Kimpo in June, 2010. This paper would present the standard model of 154kV compact substation and the way of improving facilities for the first compact substation.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.471-481
• /
• 2016

밀리미터파 대역에서 동작하는 안테나의 성능 측정을 위한 컴팩트 레인지 설계 및 실험 결과에 대해 소개한다. 전기적 거대 구조인 컴팩트 레인지의 포물면 반사판에 의해 형성되는 측정영역의 평면파를 해석하기 위하여 물리광학 기법을 적용하였다. 제작한 밀리미터파 컴팩트 레인지는 측정영역 전계 분포 실험과 고이득 안테나 측정을 통해 성능을 검증하였다. 동작 주파수 75~110 GHz에서 측정영역 직경 50 cm를 갖도록 설계한 컴팩트 레인지의 전력 균일성은 0.75 dB 이하로 측정되었다.

• 융합경영연구
• /
• 제11권2호
• /
• pp.13-22
• /
• 2023

Purpose: The purpose of this study is to examine the policy implications of establishing a compact city in Seoul, analyzing whether it is an appropriate and efficient eco-friendly housing supply alternative. Research design, data, and methodology: The analysis criteria include efficiency, safety, and comfort, with efficiency encompassing economic, energy, and public transport links' efficiency. Safety and comfort are aspects of eco-friendliness, housing safety, and improvement in living environments. Results: In terms of economic efficiency, compact cities are a less expensive option than purchasing land for housing construction. To increase energy efficiency, we plan to adopt eco-friendly energy sources. Transportation efficiency is high in locations near public transport stations. To enhance safety and comfort, we intend to create large-scale parks and forests in Seoul. To ensure residential safety, measures will be taken to reduce road vibration, vehicle noise, and scattering dust. Conclusions: Selecting an appropriate location that provides convenient public transportation is essential for creating a compact city for housing in a large city. Combining a compact and smart city is necessary, and implementing smart technologies is needed to prevent dust, noise, and vibrations, which are undesirable in a residential environment.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.223-230
• /
• 2012

This paper deals with an design of axial flux electric machine which is a key element for a compact size in a portable and manual generator system. It is expected that the generator system with an axial flux electric machine is more light and has higher efficiency than other types of generator systems. And it is used the soft magnetic composite core instead of silicon steel core in the axial flux electric machine for more compact size. The weight and efficiency of the generator system are the main keys to select the value of design variables. In this paper, the overall design process to meet the design goals, and the design results are presented with experiment results.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.28-34
• /
• 2014

A claw pole stepping motor is widely used in various fields such as a compact optical disk drive, computer peripherals, digital cameras, office automation(OA), handheld mobile devices, because it has the suitable structure for compact motor. However 3D analysis is essential for design of Claw pole stepping motor because of axial flux path. Thus, in general, it takes a lot of time in the design of Claw pole motor. In this paper, magnetic equivalent circuit considering axial flux was proposed to reduce design time of Claw pole motor and we has designed by using the magnetic equivalent circuit. In addition, in oder to verify the study, design model was verified by 3D FEM simulation and experiment.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1443-1448
• /
• 2009

Numerical analysis has been carried out to investigate air-side convective heat transfer characteristics in compact heat exchangers with continuous plate fins. Simulation results such as air flow and temperature distributions are presented, and heat transfer characteristics are compared for various inlet conditions. Results from various turbulence models are also compared for applicability. There is large difference between the local heat transfer coefficient distributions along the cylinder wall for circular tubes. Colburn j factors from the calculated results of circular and flat tubes in the heat exchangers are compared for various Reynolds number. The predicted results in this study can be applied to the optimal design of air conditioning system. with compact heat exchanger.