• Journal of Korean Society of Steel Construction
• /
• v.12 no.3 s.46
• /
• pp.329-337
• /
• 2000

The Load and Resistance Factor Design(LRFD) Specification defines two sets of limiting width-to-thickness ratios. On the basis of these limiting values, steel sections are subdivided into three categories: compact, noncompact, and slender sections. In this paper, I-Type girders of a 2 span continuous steel bridge are divided into compact and non-compact sections and analyzed. In the design process, an optimization formulation was adopted and ADS, a Fortran program for Automated Design Synthesis, was used. In this study, we studied about change of the section between compact and non-compact using optimization formulation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.143-150
• /
• 1999

The LRFD Specification defines two sets of limiting width-to-thickness ratios. On the basis of these limiting values, steel sections we subdivided into three categories: compact, noncompact, and slender sections. A compact section is capable of developing a fully plastic stress distribution (plastic moment), and can sustain rotations approximately three times beyond the yield before the possibility of local buckling arises. Noncompact sections can develop the yield stress before local buckling occurs. They may not, however, resist local buckling at the strain levels required to develop the fully plastic stress distribution. In this paper, 1-Type girders of a 2 span continuous steel bridge are divided into compact and non-compact sections and analyzed. In the design process, an optimization skill was adopted and ADS, a Fortran program for Automated Design Synthesis, was used.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4335-4349
• /
• 2023

Nuclear marine propulsion has been emerging as a next generation carbon-free power source, for which proper passive residual heat removal systems (PRHRSs) are needed for long-term safety. In particular, the characteristics of unlimited operation time and compact design are crucial in maritime applications due to the difficulties of safety aids and limited space. Accordingly, a compact and long-term-operable PRHRS has been proposed with the key design concept of using both air cooling and seawater cooling in tandem. To confirm its feasibility, this study conducted system design and a transient analysis in an accident scenario. Design results indicate that seawater cooling can considerably reduce the overall system size, and thus the compact and long-term-operable PRHRS can be realized. Regarding the transient analysis, the Multi-dimensional Analysis of Reactor Safety (MARS-KS) code was used to analyze the system behavior under a station blackout condition. Results show that the proposed design can satisfy the design requirements with a sufficient margin: the coolant temperature reached the safe shutdown condition within 36 h, and the maximum cooling rate did not exceed 40 ℃/h. Lastly, it was assessed that both air cooling and seawater cooling are necessary for achieving long-term operation and compact design.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.538-540
• /
• 2015

In this paper, We have conducted a Compact SELCA-Rod design by using FreeCAD. FreeCAD is many modern design applications such as Revit or CATIA. It is based on the concept of Workbench. A Workbench can be considered as a set of tools specially grouped for a certain task. Also It has an extensive list of features FreeCAD implements. We use this practical tool and proceed the research on Compact SELCA-Rod which is attracted the most IT-related products in 2014. SELCA-Rod is mostly based on rod-shaped form as in name. However rod-shaped design has the biggest problem for mobile Through this research, We propose a new type of SELCA-Rod. It is easy to carry and take pictures from different angle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.352-359
• /
• 2008

This paper presents a controller implementation using model based controller design programs-System Identification Toolkit, Control Design Toolkit, Simulation module. This method is easier and simpler than conventional controller design method. To implement speed control system of DC motor, a CompactRIO, Real-Time(RT) cntroller provided by NI(National Instruments), is used as hardware equipment. Firstly transfer function of DC motor drive system, which was a control target plant, can be acquired through System Identification Toolkit by using test input signal applied to motor and output signal from motor. And designing of pole-zero compensator satisfying desired control response performance through Control Design Toolkit, designed speed control response can be tested through Simulation Module. Finally LabVIEW program is converted to real-time program and downloaded to CompactRIO real-time controller Through experimental results to real DC motor drive system, designed speed control response is compared to simulation results.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.119-124
• /
• 2010

In this paper, thermal stabilization design of a new concept compact machining center has been investigated. A new concept machining center adopted a new X-axis as a NC rotary table. A New concept compact machining center is designed that spindle speed, feed rate and NC Rotary table speed are 12,000rpm, 60m/min and 110rpm each. The analysis is carried out by using FEM simulation Solidworks, CATIA and ANSYS. This paper is focused on the thermal deformation according to temperature distribution of a spindle system and feed drive system. Heat transfer analysis is performed according to heat source and atmosphere contact parts. As a result, this compact machining center is designed as a thermally stable structure.

• Journal of the Korean Society of Combustion
• /
• v.18 no.2
• /
• pp.23-31
• /
• 2013

Compact steam boiler is a useful heat exchanger in a space-intensive system. There are some constraints in terms of sizing and designing the space confined in the system which is usually used in vessels. In this study, design considerations for heavy duty heat exchangers of compact steam boilers are presented and evaluated. Especially, evaporator tubes of marine boiler which are exposed to a high temperature environment are considered. Also, extended surface designs with a high temperature are examined. In order to determine the criteria with considerations of both heat transfer rate and pressure drop in the heat exchanger, they are evaluated with major variables, such as the tube diameter, the number of tubes, and the tube length. Finally, the design parameters are estimated as the bare tubes are installed instead of the finned tubes.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.130-139
• /
• 2010

The urban style compact apartment which appeared at the end of 1990's was developed by the decrement of household members and in compliance with a new life style. Now it has its own market as a new trend. The purpose of this study is to better understand the characteristics of urban style compact apartments based on an analysis of apartments actually sold on 2008, in order to reflect on the future directions and developments. To support a comprehensive analysis, this study considered three types of compact apartments developed by : a. major developers which own multiple well-recognized brand names, b. mid-size developers under general brand names, c. new or small-size developers specializing in compact apartments. The results from 21 urban style compact apartments could be summarized as follow; 1. Most buyers are Singles or DINKs. The single women occupy a large percentage. 2. Condition of good location is under 5 minutes walk to station and accessibility to 2 and more station. 3. Exterior of building should be harmonious to surrounding and simple, the atmosphere of entrance hall should be warm and relaxed. 4. The spatial character of unit plans are developed by the ways of connecting spaces; 1) Connecting spaces by mobile partition: flexible spaces with expansion 2) Connecting spaces by hall: well arranged spaces with excursion and extends 5. The equipments of kitchen and security are fully carefully planned.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.126-135
• /
• 2010

As public space such as plaza and square in the compact city type multi-use complex is a social public space that various communication and cultural exchange take places in city environment. The purpose of this study is to analyse and categorize the design elements as a valuation basis for the public space in the compact city type multi-use complex. The scope of contents of this study is focused on the Central City, COEX and Western Dome facilities in Korea. This study review based on the previous studies and statistical analysis about questionnaires obtained from 131 users of three facilities were conducted for this study. The results of the survey as follows accessibility, comfort, exchange were extracted as the aspects for evaluation for functional activity and connection, openness, hierarchy were extracted as the aspects for evaluation for space formation. The K facility's priority aspect is the accessibility and the S and the W facilities' are the openness.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.263-271
• /
• 2006

In this study, $20\;Nm^3/hr$ scale compact hydrogen generator which can be apply to the hydrogen station was manufactured and tested. The design of $20\;Nm^3/hr$ scale compact hydrogen generator was upgraded on the base of $5\;Nm^3/hr$ scale plate hydrogen generator concept stacking the plate reactors. Ideas for improving system efficiency such as heat recovery from the exhaust, exhaust duct which is especially design for plate type reactor, reinforcement of insulation, enlargement of heat exchange area of reactor, introduction of desulphurizer reactor and PROX rector in a compact design etc. were applied. From the performance test, we can learn that the $20\;Nm^3/hr$ scale compact hydrogen generator can be operated steadily at 100% road condition and the methane conversion of over 94%(at S/C=3.75) was obtained. This result shows that the concept of plate type hydrogen generator can be scale-up to the $20\;Nm^3/hr$ scale and fit for hydrogen generator for on site hydrogen station application.