• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1577-1582
• /
• 2013

In this paper, we have analyzed the performance of MIMO (Multi-Input Multi-Output) underwater acoustic communication by using the acquired data via the experiments in water tank. First of all, in the pursuit of this aim, we have measured the channel transfer characteristics at several transceiver locations. The transmitted signal was modulated by QPSK(Quadrature Phase Shit Keying) and the received signal was recovered through the detector that contains the zero forcing equalizer. A maximum 30~40 ms delay was appeared because of physically closed water tank environment that has the harsh multi-path transmission conditions. In result of experiment, even though the bit error rate showed comparatively large when $2{\times}2$ MIMO system with two transmitters and receivers was considered. However, we confirmed it has approximately 15% enhanced performance compared with SISO (Single-Input Single-Output) system.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.8-19
• /
• 2019

Since their emergence in 2007, smart phones have advanced up to the point that 5G mobile communication in 2019 started to be commercialized. Accordingly, now it is possible to share 3D modeling files and collaborate by means of a mobile web. As the recently commercialized 5G mobile communication network is so useful in sharing 3D modeling files and collaborating that even large-size geometry files can be transmitted at ultra high speed with ultra low transfer delay. We examines characteristics of major 3D file formats such as STL, OBJ, FBX, and glTF and compares the existing 4G LTE (Long Term Evolution) network with the 5G NR (New Radio) mobile communication network. The loading time and packets of each format were measured depending on the mobile web browser environments. We shows that in comparison with 4G LTE, the loading time of STL and OBJ file formats were reduced as much as 6.55 sec and 9.41 sec, respectively in the 5G NR and Chrome browsers. The glTF file format showed the most efficient performance in all of the 4G/5G mobile communication networks, Chrome, and Edge browsers. In the case of STL and OBJ, the traffic was relatively excessive in 5G NR and Edge browsers. The findings of this study are expected to be utilized to develop a 3D file format that reduces the loading time in a mobile web environment.

• International journal of advanced smart convergence
• /
• v.3 no.2
• /
• pp.18-21
• /
• 2014

A control application requirements currently used is very low, such as packet loss rate, minimum delay on sensor networks with quality of service (QoS) requirements some packet delivery guarantee. This paper is the sampling period at the end of the actuator and sensor data transfer related to the Miss ratio for each source sensor node, use the controller and the internal ANFIS. The proposed scheme has the advantages of simplicity, scalability, and General. Simulation results of the proposed scheme can provide QoS support in WSANs.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.212-214
• /
• 2004

Hardware implemented ring buffer systems and methods are presented for the effective management of the ring buffer in TCP/IP communication. The layer interface of the ring buffer systems transfer free buffer and used buffer size information to the TCP/IP stack upper or low layer. The pointer updation interface calculates a temporary pointer from the data size which is needed by the present pointer of the ring buffer and upper or lowyer layer. The pointer manager of the ring buffer systems is responsible for saving the present pointer of the ring buffer, updating the ring buffer pointer to the new pointer, calculating the free buffer size and used buffer size of the ring buffer, and transferring the information to the upper layer. The ring buffer systems help the TCP/IP layer and TCP/IP upper or lower layer to decide the sending or receiving data size effectively. The delay of transferring data can be lowered by the ring buffer system.

• Journal of Korea Multimedia Society
• /
• v.2 no.2
• /
• pp.176-183
• /
• 1999

Using Asynchronous Transfer Mode(ATM) which is a high-bandwidth, low-delay, cell switching and multiplexing technology, Broadband-Integrated Services Digital Network (B-ISDN) can support communication services of all kinds. To evaluate the performance of ATM networks, traffic source models to meet the requirements are demanded. We can obtain random traffic distribution for ATM networks by using the Cellular Automata (CA) which have effective random pattern generation capability. In this paper we propose an algorithm using 2-D LHCA to generate more effective random patterns with good random characteristics. And we show that the randomness by 2-D LHCA is better than that of the randomness by 1-D LHCA.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1941-1948
• /
• 2000

Multistage interconnection networks (MINs) have been recognized as an efficient interconnection network for high-performance computer systems and also have been recently identified to be effective for a switching fabric of new communication structures - gigabit ethernet switch, terabit router, and ATM (asynchronous transfer mode). While lots of models analyzing the performance of MINs have been proposed, they are either inaccurate or, even if accurate, very complex for the analysis. In this paper, we propose an extremely simple mode for evaluating the multibuffered MIN with small clock cycles based on the approximation approach. Comprehensive computer simulation shows that the proposed model is very accurate in terms of the throughput and mean delay. Furthermore, it significantly reduces the computing overhead due to its simplicity.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.414-417
• /
• 2003

In this paper, a performance of Bluetooth piconet is analyzed. Average cycle time, average waiting time, average transfer delay and average queue length are used for measure of performance (MOP). Simple round robin (RR) scheduling policy with exhaustive service is used for the analysis. Packet loss is considered because of noise environments of wireless communication. Numerical results have been presented. Simulation is performed to validate the correctness of analysis.y and its maximum operating frequency is 800MHz.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.489-493
• /
• 2006

본 논문에서는 화상회의나 VOD(주문형비디오)와 같은 멀티미디어 응용은 주기적인 데이터 전송을 위해서 많은 전송 대역폭을 요구하고 있다. 그러나 인터넷과 같은 TCP/IP 기반의 통신망에서는 멀티미디어 스트림을 주기적으로 전송하고 이에 필요한 대역폭의 할당 가능성을 보장할 수가 없다. 따라서 본 논문은 주기적으로 네트워크 상태를 감시하여 필요에 따라 송신자의 전송율을 조정하며, 미리 채널에 대한 요구를 예측하고 네트워크 상태에 대한 피드백 정보를 통해 멀티미디어 데이터의 실시간 전송과 서비스 품질을 유지하기 위한 네트워크 지연시간 축소 기법을 제시하였다.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.93-99
• /
• 1996

In this study, we compare performance of priority schemes of FDDI and Expressnet for integrated voice and data traffic through simulation. The voice capacity of FDDI is higher than that of Expressnet for all cases considered. When compared to Expressnet, FDDI achieves a higher data throughput for file transfer traffic but it incurs a longer delay for interactive traffic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1852-1857
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$, delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s\;130{\mu}s\;200{\mu}s$, delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s\;160{\mu}s\;250{\mu}s$ 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the emu FACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.