• International Journal of Internet, Broadcasting and Communication
• /
• 제5권2호
• /
• pp.11-14
• /
• 2013

This paper describes the sigma-delta ADC/DAC digital block with two channels. The ADC block has comb filter and three half band filters. And the DAC block has 5th Cascaded-of-Integrators Feedback DSM. The ADC and DAC support I2S, RJ, LJ and selectable input data modes of 24bit, 20bit, and 16bit. It is fabricated with 0.35um Hynix standard CMOS cell library. The chip size is 3700*3700um. It has been verified using NC Verilog Simulator and Matlab Tool.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• 산업기술연구
• /
• 제19권
• /
• pp.81-89
• /
• 1999

We have developed a power line simulator which is one of the basic tools for the research of the power line communication and its control system. In the developed simulators, we have considered the transfer function of the power line, noises and signal attenuation characteristics. Simulator was made using the matlab tool program. We made the power line modern using the FSK chip(ST7537) and experimentalized to show the efficiency grade of simulator. We have expected that the developed simulators are very useful in the area for the power line communication research and the control system design.

• 한국도서관정보학회지
• /
• 제35권1호
• /
• pp.377-397
• /
• 2004

This study investigated the use of community information and communication technologies in light of its dual visions (i.e., serving as an affordable Internet service provider and a community building tool). Surveying the randomly selected users of a community network (n = 213), this study examined the influence of the community features on service use compared to that of Internet features. The present study found that the respondents were using the service mainly for general Internet features, such as email and web access. More than two-thirds of the respondents did not recognize community contents as available service. Community features of the service were found as significant predictors of use only among people who were aware of community contents but not among people who were not. Nonetheless, there was no difference in the amount of use between the two groups, indicating that the awareness of community contents itself did not increase use. Findings suggest that the service providers did not fully communicate the community aspect of the service with the users although the very aspect distinguishes the service from other Internet services.

• 대한가정학회지
• /
• 제48권4호
• /
• pp.103-123
• /
• 2010

This study examined the effect of group counseling on the self-esteem, self-efficacy, and congruent communication style of female victims of family violence. A twice-weekly group counseling consisting of 10 sessions was provided to 5 women residing in shelters in Seoul, South Korea from October $19^{th}$ to November $20^{th}$ 2009. This study employed the self-esteem scale developed by Rosenberg(1965) and translated into Korean by Jeon Byoung Jae(1974), a self-efficacy measurement tool(Kim A Young,1997) and a congruency scale(Go Moon Jeong, 2008). The Wilcoxon non-parametric verification was used to identify the differences between before and after the group counseling sessions. The results revealed meaningful improvements in self-esteem, self-efficacy and congruent communication styles.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.546-553
• /
• 2000

W e have developed a power line simulator which is one of the basic tools for the research of the power line communication and its control system. In the developed simulators, we have considered the transfer function of the power line, noises and signal attenuation characteristics. Simulator was made using the matlab tool program. We made the power line modem using the FSK chip(ST7537) and experimentalized to show the efficiency grade of simulator. We have expected that the developed simulators are very useful in the area for the power line communication research and the control system design.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 추계학술발표대회
• /
• pp.467-470
• /
• 2006

임베디드 시스템의 발달은 다양한 분야로의 보급으로 인해 널리 확장되면서 점차 빠르게 발전되어왔다. 이러한 빠른 발전은 점차 다양한 기기들의 융합인 컨버전스로 나아가고 있으며, 동일한 분야의 기기에서 시스템은 다르지만 비슷한 성능을 가진 기기들이 등장하고 있다. 이렇게 임베디드 시스템이 다양해지고 비슷한 성능의 제품들이 출시되는 상황에서 임베디드 소프트웨어의 중요성은 더욱 증가할 것이며, 오류를 검사하는 테스팅은 더욱더 중요해 지고 있다. 본 논문은 이기종 환경의 다양한 임베디드 시스템을 지원가능하고, 보다 가볍고 효율적으로 사용가능한 임베디드 소프트웨어 테스팅 도구를 설계하고 구현하고자 한다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (A)
• /
• pp.351-355
• /
• 2006

최근 플래시 메모리는 여러 장점들 때문에 다양한 휴대기기에서 많이 사용되고 있다. 반면 내구성에 약점을 갖고 있는 플래시 메모리의 특성 때문에 최대한 소거 동작을 적게 하여 오랫동안 사용하는 FTL 알고리즘을 개발하는 연구가 필요하다. 이러한 FTL 알고리즘을 실험하고 평가하기 위해서 트레이스 데이터를 연구에 활용하는 일이 많아지면서, 쉽게 트레이스 데이터에 대한 분석도구를 개발하였다. 우리는 트레이스 데이터를 다양한 그래프로 그려주고 통계치를 산출해주는 도구를 개발하였고, 이를 바탕으로 트레이스 분석 작업을 쉽게 할 수 있도록 하였다. 마찬가지로 이러한 도구는 버퍼 교체정책을 실험하고 평가하는 일에도 사용 될수 있다. 그리고 각 그래프를 설명하면서 트레이스에 데이터 대한 설명과 함께 분석을 통하여 버퍼교체 알고리즘 및 FTL 알고리즘에 어떻게 활용 할 수 있는지 설명하였다.

• 한국시뮬레이션학회논문지
• /
• 제7권1호
• /
• pp.1-14
• /
• 1998

In this paper, we propose an efficient network communication scheme tailored to the network virtual reality(NVR) system. We first present the architecture and implementation of CVRAT (collaborative virtual reality authoring tool). The design goal of CVRAT is to provide consistent and scalable shared virtual environments. To achieve this goal, we classify the network messages according to their reliability and latency requirements. These conflicting requirements lead us to conceive a heterogeneous communication scheme which provides the unicast and three different multicast transport services; unreliable multicast, receiver-driven reliable multicast, fast reliable multicast. Each protocol has trade-offs in reliability, latency and bandwidth usage. The characteristics are analyzed by several experiments. Finally, applying this communication method to multi-participant battle-field tank simulation, we show the efficacy of proposed heterogeneous transport mechanism.