• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.122-128
• /
• 2007

This paper represents the Input/Output (I/O) serial communication methods between overground and overhead controllers using a programmable logic controller (PLC). In general, the systems composed by overground and overhead controllers use exclusive serial communication units. This, however, has a demerit such as a high cost as well as some restrictions of the system itself. Thus, this paper suggests methods by I/O cards for data communication between overground and overhead controllers. In this system, there is no special card and it therefore has a lower cost and is more flexible than the exclusive serial communication unit.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 추계학술발표대회
• /
• pp.1142-1145
• /
• 2008

This paper proposes a novel cluster-based lookup service in mobile ad hoc networks. By applying a self-adaptive multi-hop clustering, we avoid the empty region problem of grid system and omit the need of GPS device. The novelty of the proposed scheme is in its exploitation of hashing function for location querying to achieve low communication overhead. By varying different simulation parameters, we show that the proposed scheme is scalable and adaptive to many networks scenarios. Experiment results demonstrate that our scheme reduces the communication overhead significantly.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1394-1400
• /
• 2014

The current flowing through the overhead transmission lines causes induced voltage on the communication lines, which can be prevented by calculating the induced voltage at the planning stage for overhead transmission line installment through an agreement between the communication and electric power companies. The procedures to calculate the induced voltages, however, are complicated due to the variety of parameters and tower types of the overhead transmission lines. The difficulty necessitates the development of a simulator to measure the induced voltage on the communication lines. This paper presents two simulators developed for this purpose; one using the Data Base (DB) index method and the other using the Graphic User Interface (GUI) method. The simulators described in this paper have been implemented by the EMTP (Electromagnetic Transient Program).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1641-1643
• /
• 1998

In recent the maximum voltage of overhead power transmission lines in Korea was upgraded to 765kV. In general a overhead ground wire is installed for protecting overhead power transmission lines from lightning. For the 765kV line, Composite Overhead Ground Wire with Optic Fiber (OPGW) is applied as a overhead ground wire and have a function of the communication line between substations. In this paper, the construction and properties of OPGW, and its installation methods are discribed.

• 한국정보전자통신기술학회논문지
• /
• 제7권4호
• /
• pp.223-228
• /
• 2014

LT 부호에 대해 BP 복호 알고리즘은 가장 빠른 복호 방법 중 하나로 알려져 있다. 그러나 BP 알고리즘은 대부분의 LT 부호를 복호하는데 있어서 많은 오버헤드를 요구하며 특히 짧은 길이의 LT 부호에 대해서는 과다한 오버헤드가 소요된다. 본 논문에서는 오버헤드를 줄이기 위해 1-차수의 패킷을 탐색할 수 있는 방법을 제시하고 이를 이용한 개선된 BP 복호 알고리즘을 제안하였다. 제안된 복호 알고리즘은 기존의 BP 알고리즘에 비해 같은 복호 복잡도를 유지하면서도 더 적은 오버헤드를 가짐을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권5호
• /
• pp.222-238
• /
• 2008

In this paper, the random key pre-distribution scheme introduced in ACM CCS'02 by Eschenauer and Gligor is reexamined, and a generalized form of key establishment is introduced. As the communication overhead is one of the most critical constraints of any successful protocol design, we introduce an alternative scheme in which the connectivity is maintained at the same level as in the original work, while the communication overhead is reduced by about 40% of the original overhead, for various carefully chosen parameters. The main modification relies on the use of a two-level key pool design and two round assignment/key establishment phases. Further analysis demonstrates the efficiency of our modification.

• Journal of Communications and Networks
• /
• 제14권1호
• /
• pp.63-74
• /
• 2012

Multicast data communication is an efficient communication scheme, especially inmulti-hop ad hoc networks where the media access control (MAC) layer is based on one-hop broadcast from one source to multiple receivers. Compared to unicast, multicast over a wireless channel should be able to deal with varying channel conditions of multiple users and user mobility to provide good quality to all users. IEEE 802.11 does not support reliable multicast owing to its inability to exchange request-to-send/clear-to-send and acknowledgement packets with multiple recipients. Thus, several MAC layer protocols have been proposed to provide reliable multicast. However, additional overhead is introduced, as a result, which degrades the system performance. In this paper, we propose an efficient wireless multicast MAC protocol with small control overhead required for reliable multicast in multi-hop wireless ad hoc networks. We present analytical formulations of the system throughput and delay associated with the overhead.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.463-472
• /
• 2022

At certain wavelengths, single-pixel imaging is considered to be a solution that can achieve high quality imaging and also reduce costs. However, achieving imaging of complex scenes is an overhead-intensive process for single-pixel imaging systems, so low efficiency and high consumption are the biggest obstacles to their practical application. Improving efficiency to reduce overhead is the solution to this problem. Salient object detection is usually used as a pre-processing step in computer vision tasks, mimicking human functions in complex natural scenes, to reduce overhead and improve efficiency by focusing on regions with a large amount of information. Therefore, in this paper, we explore the implementation of salient object detection based on single-pixel imaging after a single pixel, and propose a scheme to reconstruct images based on Fourier bases and use U²Net models for salient object detection.

• 한국정보과학회논문지:정보통신
• /
• 제37권5호
• /
• pp.327-338
• /
• 2010

Complete Subtree(CS)[1] 기법은 브로드캐스트암호화기법 중 비상태성을 만족시키는 부분집합-커버(Subset-Cover) 접근방법으로 그룹의 키의 배포 및 업데이트를 수행하는 방법이다. 브로드캐스트가 서비스 제공자로부터 단방향으로 이루어지는 비상태성 수신자를 가지는 환경에서는 키 관련 데이터 전송을 위해 저장 오버헤드와 통신 오버헤드가 발생한다. 본 논문에서는 효율적인 통신 오버헤드를 위해 새로운 탈퇴 기법인 Merged Complete Subtree(MCS) 기법을 제안한다. MCS 기법에서는 CS기법에서 키 암호화 키(Key Encryption Key)를 분배하기 위해 사용하는 부분집합의 구성을 단순 트리구조가 아닌 합집합 기반의 복합 구조를 취한다. 이 수정 사항은 늘어난 전체 부분집합과 그에 해당되는 키 암호화 키로 인해 보다 많은 저장 오버헤드를 필요로 하지만 CS 기법에서 헤더(header)를 구성하기 위한 두 부분집합을 하나의 합집합 형태로 표현 가능하게 함으로써 기존의 CS기법의 통신 오버헤드를 절반으로 감소시킨다. 제안된 기법은 전체 잠재적 사용자에 대한 탈퇴한 사용자의 비율이 커졌을 때 큰 이득을 가지며 공모를 통한 공격에 대하여 완벽한 저항성을 가진다.

• 한국인터넷방송통신학회논문지
• /
• 제11권6호
• /
• pp.57-62
• /
• 2011

본 논문에서는 GE 삼각 화를 이용해 LT 부호의 복호 과정을 수행함으로써 복잡도와 오버헤드 성능을 모두 개선한 효율적인 복호 방식을 제안하였다. BP 복호 방식은 간단하고 빠르기는 하나 부호 블록이 짧을수록 복호하는데 큰 오버헤드가 필요하다는 단점이 있고, OFG 알고리즘은 오버헤드는 작으나 연산 양이 많다. 시뮬레이션 결과 제안한 복호 방식은 OFG 알고리즘에 비해 연산 양이 5배 이상 감소되었으며 오버헤드는 1~5%의 적은 양을 보였다.