• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.620-625
• /
• 2004

In this paper, we studied the emissive electric field due to the communication signal and the noise in medium voltage power-line. There are many types of conductive noise in power-line channel, which gives rise to radiation. And if the DMT carrier signal was excited, the current by this term was added to the current by noise and, generate radiation. We calculated input impedance by means of signal input network model of medium voltage power-line channel for calculating these currents. We calculated currents by input impedance and, calculated the emissive electric field by this calculated currents. From the measurement results, we knew that the measured results are very similar to the calculated results and if the input signal power level was higher than -40 dBm, the emissive electric field exceeds FCC radiation limit level 69.5 dB$\mu$V/m.

• 센서학회지
• /
• 제27권3호
• /
• pp.143-149
• /
• 2018

In this paper, we introduce an edge-spike modulation method for visible light communication (VLC). This method is effective in preventing LED flicker and 120 Hz noise interference in base-band VLC. In the VLC transmitter, edge-spikes are generated by passing the digital data through a simple RC-high pass filter (HPF). The LED modulation of the edge-spikes does not change the average power of the LED light; thus it prevents LED flicker. In the VLC receiver, the 120 Hz noise from other lighting lamps is easily eliminated by RC-HPF, while the edge-spike signal is detected normally. In our experiment, the message of an air-quality sensor was successfully transmitted using edge-spike modulation. This structure is useful in constructing, e.g., wireless gas monitoring sensor systems to warn and prevent harmful gas leakage accidents in buildings using LED light.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.130-132
• /
• 2012

In this paper, a temperature control for LED(Light Emitting Diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To minimize the fan sound noise, optimal size of the heat sink was studied. Also, a teleoperting control of LED lamps using RF communication was studied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.357-358
• /
• 2006

We propose the robust PBFLMS in noises, which is the enhanced acoustic echo canceller using ACPBF-LMS(Alternative Constrained Partitioned Block Frequency domain Least Mean Square) algorithm. The defect of the block structure filtering is the deterioration of convergence efficiency from noise and interference. To improve the performance of convergence efficiency, noise effect should be reduced. The new method of reducing noise effect is proposed, which apply the estimated background noise to adaptive filter step size. By experiments, the proposed acoustic echo canceller has TCL of 50dB, and always provides faster convergence speed and lower complexity than the full-tap NLMS. We also carried out an implementation of PBFLMS using ARM9EJ-S.

• ETRI Journal
• /
• 제29권5호
• /
• pp.607-613
• /
• 2007

Most signal-to-noise ratio (SNR) estimation techniques in digital communication channels derive the SNR estimates solely from samples of the received signal after the matched filter. They are based on symbol SNR and assume perfect synchronization and intersymbol interference (ISI)-free symbols. In severe channel distortion where ISI is significant, the performance of these estimators badly deteriorates. We propose an SNR estimator which can operate on data samples collected at the front-end of a receiver or at the input to the decision device. This will relax the restrictions over channel distortions and help extend the application of SNR estimators beyond system monitoring. The proposed estimator uses the characteristics of the second order moments of the additive white Gaussian noise digital communication channel and a linear predictor based on the modified-covariance algorithm in estimating the SNR value. The performance of the proposed technique is investigated and compared with other in-service SNR estimators in digital communication channels. The simulated performance is also compared to the Cram$\acute{e}$r-Rao bound as derived at the input of the decision circuit.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.81-90
• /
• 2003

In the military communication environment, it is very difficult to obtain clear voice signal due to the high level noise. The purpose of this study is to find out the best body spot to get the vocal chords signal by measuring the skin or the bone conducting vibrations of different body positions within the noise environment. Based on the experimental study, it was found out that the measurement of sound signal within the ear is the best way to get the voice which comes from the vocal chords and this method can prevent the interruption of noise. This study will give the effective voice communication method in the high noise environment and be applicable to military purpose.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.473-476
• /
• 2017

디지털 정보화 시대의 사회로 발전함에 따라 수많은 전자통신장비들이 대중화 되고 있다. 그러나 통신장비간 신호 전송 과정에서 여러 가지 원인으로 잡음이 발생한다. 통신시스템에 발생하는 잡음에는 모든 주파수 대역에 고르게 분포하여 나타나는 백색 잡음이 대표적이다. 이러한 백색 잡음은 시스템의 오류를 일으켜 신뢰도를 저하시킨다. 따라서, 본 논문에서는 백색 잡음을 제거하기 위한 기존의 가우시안 필터, 메디언 필터, 알파 트림드 평균 필터, 최소/최대 필터를 구현, 각 필터들의 특성 및 성능을 서로 비교하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.798-800
• /
• 2014

최근 디지털 영상 기술의 향상에 따라 영상데이터 전송뿐만 아니라 멀티미디어 통신 서비스를 통해 대부분 통신 기술들이 발전하고 있다. 그러나 영상을 저장하고 전송하는 과정에서 잡음이 여전히 발생하며 이러한 잡음은 영상의 품질을 급격히 저하시킨다. 이러한 잡음을 제거하기 위해 SMF, CWMF, SWMF 등이 제안되었으며 이때 필터들은 잡음에 지장이 있어서 특성이 다소 미흡하다. 따라서 본 논문에서는 영상에 첨가되는 임펄스 잡음을 제거하기 위해 변형된 메디안 필터를 제안하였다. 그리고 임펄스 잡음 제거 성능을 확인하기 위해 알고리즘 판단 기준으로 PSNR (peak signal to noise ratio) 을 사용하여 기존의 방법들과 비교하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2357-2380
• /
• 2019

In this paper, we investigate the impact of hardware impairments (HWIs) on the performance of a downlink massive MIMO system. We consider a single-cell system with maximum ratio transmission (MRT) as precoding scheme, and with all the HWIs characteristics such as phase noise, distortion noise, and amplified thermal noise. Based on the system model, we derive closed-form expressions for a typical user data rate under two scenarios: when a common local oscillator (CLO) is used at the base station and when separated oscillators (SLOs) are used. We also derive closed-form expressions for the downlink transmit power required for some desired per-user data rate under each scenario. Compared to the conventional system with ideal transceiver hardware, our results show that impairments of hardware make a finite upper limit on the user's downlink channel capacity; and as the number of base station antennas grows large, it is only the hardware impairments at the users that mainly limit the capacity. Our results also show that SLOs configuration provides higher data rate than CLO at the price of higher power consumption. An approach to minimize the effect of the hardware impairments on the system performance is also proposed in the paper. In our approach, we show that by reducing the cell size, the effect of accumulated phase noise during channel estimation time is minimized and hence the user capacity is increased, and the downlink transmit power is decreased.

• ETRI Journal
• /
• 제43권2호
• /
• pp.184-196
• /
• 2021

The research domain of underwater communication has garnered much interest among researchers exploring underwater activities. The underwater environment differs from the terrestrial setting. Some of the main challenges in underwater communication are limited bandwidth, low data rate, propagation delay, and high bit error rate (BER). As such, this study assessed the underwater acoustic (UWA) aspect and explored the expression of error performance based on t-distribution noise. Filter orthogonal frequency-division multiplexing refers to a new waveform candidate that has been adopted in UWA, along with turbo and polar codes. The empirical outcomes demonstrated that the noise did not adhere to Gaussian distribution, whereas the simulation results revealed that the filter applied in orthogonal frequency-division multiplexing could significantly suppress out-of-band emission. Additionally, the performance of the turbo code was superior to that of the polar code by 2 dB at BER 10-3.