• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1057-1069
• /
• 2017

The applications of Wireless Sensor Networks (WSN) are progressively adopting for various smart home services such as home automation, controlling smart home household appliances, constrained application services in a smart home, etc. However, enabling a seamless and ubiquitous WSN communication between the smart home appliances is still a challenging job. Therefore, in this paper, we propose a smart home control system using an Actuator based ZigBee networking (AZNET). The working of the proposed system is further divided into three phases, 1) an interference avoidance system is adopted to mitigate the effect of interference caused due to the co-existence of IEEE 802.11x based wireless local area networks (WLAN) and WSN, 2) a sensor-based smart light control system is used to fulfill the light requirement in the smart home using the sunlight with light source, and 3) an autonomous home management system is used to regulate the usage time of the electronic appliances in the smart home. The smart is tested in real time environment to use the sunlight with light sources in a various time of the day. Similarly, the performance of the proposed smart home is verified through simulation using C# programming language. The results and analysis revealed that the proposed smart home is less affected by the interference and efficient in reducing the energy consumption of the appliances available in the smart home scenario.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.256-268
• /
• 2016

Modern networks consisting of various heterogeneous equipment are often installed in a distributed manner. Thus the NETCONF standard was established to manage networks centrally and efficiently. In this paper, we present a method that integrates each NETCONF layer into a single system based on the results of previous studies. In the RPC Layer, an asynchronous communication channel and parallel processes are possible using multi-threading. In the Operation Layer, operational efficiency is increased by using a data group with dependencies between the equipment configuration data and by improving the data structure, enabling efficiently processing of XML queries even with multiple managers. The data modeling techniques and grouping methods in the Content Layer are presented in detail for interoperability between the Operation Layer and the Content Layer. Finally, the GUI program was implemented and its implementation is reported. We performed an experiment comparing the improved NETCONF with the standard NETCONF to measure factors, such as query processing ratio, query processing speed, and CPU utilization. The improved NETCONF demonstrated excellent query processing ratio and query processing speed, whereas the standard NETCONF had excellent CPU utilization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.213-216
• /
• 2007

The paper deals with a approach to underwater acoustic based Ad-hoc communication, which allows major design strategies for Media Access Control (MAC) within a group of the autonomous underwater vehicles(AUV). The proposed MAC aims at deploying AUV-centric star topology, which minimizes overhead of sensor nodes and improves energy-efficiency. Furthermore, that is also well under long and unknown propagation delays of the underwater acoustic medium. The implemented MAC protocol makes it easier to achieve frame synchronization than TDMA due to deploying localized schedule time, in addition to saving energy consumption by letting nodes sleep. It is also superior to MACA and MACAW in terms of propagation delay. This scalable centralized protocol has the potential to serve as a primer for development of MAC protocol for future underwater acoustic based ad-hoc networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1517-1531
• /
• 1999

The Internet is recently evolving into the directions which is capable of incorporating stream-type services such as voice and video services. However, the existing Internet can only support a best-effort delivery model and thus it is difficult to satisfy these requirements as well as to provide the QoS beyond a certain degree. Accordingly, it is imperative to develop QoS based routing algorithm in order to allow the routing by the user's QoS demand and to be applied into wide area networks. In this thesis, we presented new routing algorithms and made performance evaluations. The proposed algorithms allow the routing by the user’s QoS demand level in order to provide the diverse Internet application services based on ATM network environment that is expected to play a role as an infrastructure of high-speed communication network. They also have a feature of shortening the waiting time for address analysis and have a quality-proven characteristics with enhanced network scalability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1316-1322
• /
• 2004

Recently, the UWB (ultra wide-band) wireless communication technology, which provides high data transmission and is capable of linearly trading between throughput and signal-to-noise ratio (SNR), has drawn much attention for short-range wireless networks. Fully exploiting its notable features and minimizing its interference to coexisting other systems require the knowledge of SNR's at receivers In this paper, we propose an algorithm for estimating the pulse energy to noise ratio Ep/No of UWB signal with utilization of outputs from a correlator at a receiver, and evaluate the performance of the proposed algorithm through computer simulation. According to simulation results, the maximum standard deviation is about 1 13 dB with a block size of 500. Except for Ep/No=O and 2 dB cases with a block size of 500, no errors greater than 3 dB were observed in all the remaining experiments. Generally speaking, it improves as the true Ep/No, increases and as the block size increases A notable feature of the proposed algorithm is that it does not reduce the effective throughput because the estimation process does not require sending additional training signal of any specific format.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1441-1449
• /
• 2015

Wireless universal serial bus (WUSB) is the USB technology merged with WiMedia PHY/MAC. WUSB can be applied to wireless persanal area network (WPAN) applications as well as PAN applications like wired USB. Because numerous WUSB networks operate independently for each application, data conflict can occur between adjacent networks. To avoid data conflict, the resource in a different time zone can be utilized. However, if devices in a network increase, available resources in the network decrease, and then the lack of resources necessary to provide service can occur. To solve this problem, we propose interference avoidance scheme for WUSB systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1266-1275
• /
• 2015

This review paper introduces recent results on interference management for full-duplex cellular systems. Interference management techniques for uplink-downlink cellular networks are frist introduced, which are closely related to those for full-duplex cellular systems. Self-interference suppression method for full-duplex radios and the corresponding modeling of full-duplex cellular systems are then explained. Even if self-interference is perfectly suppressed, there exists a new source of interference between full-duplex users for full-duplex cellular systems. Therefore, management of such user-to-user interference is of crucially importance to improve the capacity of full-duplex cellular systems. Recently, new interference management techniques for achieving the optimal sum degrees of freedom of full-duplex cellular systems have been proposed. In this review paper, these optimal interference management techniques are mainly introduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1259-1266
• /
• 2010

M2M communication is considered as a key enabling technology to monitor the status of objects, vehicles, humans through auto-configuring wireless networks. In M2M network, there are active research activities to enhance the reliability on data while being collected from wireless sensor network. The reliability issue becomes more important as wireless sensor networks carry multimedia data, which is delay sensitive. The interference caused by the adjacent neighbor sensor nodes is a major factor in network performance degradation, which becomes more severe in multi-hop routing environment. In this paper, we propose inerfernce-free multipath routing protocol for M2M wireless network for enhancement of packet delay performance. The simulation results show that the proposed routing algorithm outperforms the existing routing protocols in terms of packet delay and throughput.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.183-196
• /
• 2010

Monitoring and economical design of alternative energy generators such as wind turbines is becoming increasingly critical; however acquisition of the dynamic output data can be a time-consuming and costly process. In recent years, low-cost wireless sensors have emerged as an enabling technology for structural monitoring applications. In this study, wireless sensor networks are installed in three operational turbines in order to demonstrate their efficacy in this unique operational environment. The objectives of the first installation are to verify that vibrational (acceleration) data can be collected and transmitted within a turbine tower and that it is comparable to data collected using a traditional tethered system. In the second instrumentation, the wireless network includes strain gauges at the base of the structure. Also, data is collected regarding the performance of the wireless communication channels within the tower. In both turbines, collected wireless sensor data is used for off-line, output-only modal analysis of the ambiently (wind) excited turbine towers. The final installation is on a turbine with embedded braking capabilities within the nacelle to generate an "impulse-like" load at the top of the tower. This ability to apply such a load improves the modal analysis results obtained in cases where ambient excitation fails to be sufficiently broad-band or white. The improved loading allows for computation of true mode shapes, a necessary precursor to many conditional monitoring techniques.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.223-231
• /
• 2015

This paper proposes a new wireless backhaul technology based on MHN(Mobile Hotspot Network) which uses a wide frequency band of millimeter wave to provide wideband Wi-Fi services for subway passengers. Performance analysis of MHN up and down links, based on data: up and down links structure analysis of physical layer and simulation study of the MHN wireless backhaul link model, show that the proposed MHN-based wireless backhaul network can transmit data at a 1.2Gbps data rate and provide Internet service 100 times faster than that of conventional WiBro-based wireless backhaul networks. These results indicate that the proposed MHN technology is appropriate for subway mobile networks.