• ETRI Journal
• /
• v.34 no.1
• /
• pp.122-125
• /
• 2012

A video signal through a high-density optical link has been demonstrated to show the reliability of optical link for high-data-rate transmission. To reduce optical point-to-point links, an electrical link has been utilized for control and clock signaling. The latency and flicker with background noise occurred during the transferring of data across the optical link due to electrical-to-optical with optical-to-electrical conversions. The proposed synchronization technology combined with a flicker and denoising algorithm has given good results and can be applied in high-definition serial data interface (HD-SDI), ultra-HD-SDI, and HD multimedia interface transmission system applications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.112-117
• /
• 2016

This paper presents a half-rate current-integrating DFE receiver with sub-unit interval (sub-UI) inter-symbol interference (ISI) cancellation. By having a single additional DFE tap in each data path, the proposed DFE receiver can minimize BER degradation due to input pattern dependency and feedback tap latency problems in conventional current-integrating DFE receivers. The proposed DFE receiver was designed and fabricated in a 45 nm CMOS process, whose measurement results indicated that the BER bathtub width is increased from 0.235 UI to 0.315 UI (34% improvement) at $10^{-12}$ BER level.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.859-864
• /
• 2012

The computer network plays an important role in modern digital controllers within a safety system of a nuclear power plant. For the reliable and realtime data communication between controllers, this paper proposes a modified high-reliable MVB(multi-function vehicle bus) as a main control network for a safety system of a nuclear power plant. The proposed network supports the state-based communication in order to ensure the deterministic communication latency, and very fast network recovery when the bus master fails compare to the standard MVB. This paper also shows the implementation results using a FPGA-based testbed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1733-1751
• /
• 2015

The IEEE 802.15.4 standard not only provides a maximum of seven guaranteed time slots (GTSs) for allocation within a superframe to support time-critical traffic, but also achieves ultralow complexity, cost, and power in low-rate and short-distance wireless personal area networks (WPANs). Real-time wireless body area sensor networks (WBASNs), as a special purpose WPAN, can perfectly use the IEEE 802. 15. 4 standard for its wireless connection. In this paper, we propose an adaptive GTS allocation scheme for real-time WBASN data transmissions with different priorities in consideration of low latency, fairness, and bandwidth utilization. The proposed GTS allocation scheme combines a weight-based priority assignment algorithm with an innovative starvation avoidance scheme. Simulation results show that the proposed method significantly outperforms the existing GTS implementation for the traditional IEEE 802.15.4 in terms of average delay, contention free period bandwidth utilization, and fairness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2379-2397
• /
• 2017

Content distribution technology, which routes content to the cache servers, is considered as an effective method to reduce the response time of the user requests. However, due to the exponential increases of content traffic, traditional content routing methods suffer from high delay and consequent inefficient delivery. In this paper, a content selection policy is proposed, which combines the histories of cache hit and cache hit rate to collaboratively determine the content popularity. Specifically, the CGM policy promotes the probability of possible superior paths considering the storage cost and transmission cost of content network. Then, the content routing table is updated with the proportion of the distribution on the paths. Extensive simulation results show that our proposed scheme improves the content routing and outperforms existing routing schemes in terms of Internet traffic and access latency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.794-799
• /
• 2012

The international standard, ISO-11783, was designed for the communication within an agriculture machinery. Even if it is based on the CAN (Control Area Network) protocol, its extended features which include point-to-point communication and large data transmission support show different network performance from the standard CAN. This paper proposes a dynamic priority allocation method to improve the real-time performance of ISO-11783. Computer simulation shows reduction of the deadline-missed cases and community latency via proposed algorithm.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.103-104
• /
• 2016

사물 인터넷에서는 대부분의 기기가 와이맥스와 같은 무선 통신을 사용하는데 음영지역이 발생할 경우 펨토셀이 필요하다. 펨토셀은 안전적인 통신을 제공하지만 외부에서 무선 송신을 통해 접근할 수 있어 중간자 공격이 발생하기 쉽다. 강제 지연 인터락 프로토콜은 중간자 공격을 탐지하지만 고정된 지연 시간을 통해 패킷 전송 시간은 일정하다. 본 논문은 평가 함수를 사용하여 동적 지연 시간 결정을 통해 패킷 전달 시간에 대해 감소하는 방법을 제안한다. 이로 인해 제안 기법에서는 지연 시간이 효율적으로 감소하여 전송 속도를 향상한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.173-174
• /
• 2014

Handover is constantly a challenging issue in wireless networks. Most of the existing solutions are host-based, which are implemented on the wireless terminals and leave the decision making to the terminals. This paper studies the problem of network-based handover in the wireless networks with the constraints of low latency as well as low computational time. To address this problem, we employ the software-defined network (SDN) architecture to facilitate handover. According to the operational model of the SDN, we define a workflow for all involved network entities, and then design a framework implementing the workflow as a complete handover system. The proposed framework aims to establish a channel conveying the mobility-related information of devices and the context information of their vicinity from the switches/access routers to the controllers. Based on collected information, the controller can optimally execute the handover.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.583-585
• /
• 2012

PMIP (Proxy Mobile IPv6)은 네트워크 기반 이동성 지원 프로토콜로, 호스트 기반 이동성 프로토콜에 비해 핸드오버 시간을 줄였지만 완전히 제거하지 못하였고 핸드오버 시의 패킷 손실에 대해서도 고려하지 않는다. 따라서 핸드오버 시간을 줄이고 패킷 손실을 방지하여 끊김 없는 서비스를 제공하기 위한 빠른 predictive 핸드오버 방식이 제안되었다. 하지만 이 방식을 이용할 경우 predictive 모드에서의 핸드오버 절차를 진행하기 위해 불필요한 핸드오버 지연이 발생할 수 있다. 본 논문에서는 GPS를 이용하여 MN (Mobile Node)의 위치정보를 파악하고 이를 통해 predictive 모드에서의 빠른 핸드오버 절차 진행 시 발생하는 문제점 해결을 위한 기법을 제안한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.287-289
• /
• 2013

Fast Handover for Proxy Mobile IPv6 (FPMIPv6), a protocol described in RFC 5949, is used to reduce handover latency and minimize packet loss problem occuring in the Proxy Mobile IPv6 (PMIPv6) protocol. However, during the study of implementing FPMIPv6, we found the Out-of-Order Packet (OoOP) problem that occurs in the experiment of FPMIPv6. Since the OoOP is an issue that affects significantly to QoS of the network, in this paper, we analyze the OoOP problem by using network model. The analysis conducts the cause of occurring OoOP problem due to there exist two paths for data transmitted from Correspondent Node (CN) to MN in FPMIPv6.