• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.560-563
• /
• 2002

This paper proposes a home control system architecture that have network configuration function. The proposed home control system architecture is implemented with partly hardware and software. For implementation of this system architecture, we developed ECONICS which is home automation controller. ECONICS consists of main board and communication modem. This communication modem supply the power line communication. The physical layer and the MAC layer software of EIA 709.1 standard protocol are implemented in communication modem. The upper layer software of EIA 709.1 standard protocol and home configuration software for home network installation, management, diagnostics, control and monitoring are implemented in main board of ECONICS. We verified the commercial feasibility of the proposed system through the home network configuration and operation. As a result, we have concluded that the proposed home control system architecture provides all the key function necessary to easily manage and control home network nodes.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.21-30
• /
• 1994

We discussed the Distributed Control System's design on preface and analyzed time of the real-time communication by using designed system. The DCS proposed in this thesis was implemented to network file system having recovery advantage and shared memory method to access file system of a Remote Station with ease. Also, this system minimized the network delay-time by using the real-time VME147 board. In implemented DCS, the performance analysis of real-time process of a Remote Station was done to get the total time for reak-tune communication from a Remote Station to the Central Station after terminating of process. For the analysis of system performance, we experiented by three steps. Firstly, we measuredthe processing the of LOOP function that real-time CPU convertes to-2,500~10.000 values from the input data of the Analog Interface Card. Secondly, we measured the processing time of the LOGIC function and the LOOP function. Lastly, we measured total processing time for communication from a Remote Station to the Centrol Station.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.1051-1058
• /
• 2011

The military communication equipment is required the high reliability for operating adequate functions under severe conditions. This reliability is the essential element for the quality of the product, for the uncontrolled factors, such as the clearance, damage of the material, the reduction of stiffness, which are the designer is unable to handle. In this paper, the uncertainty for the dimension was supposed to the probability model for the military communication equipment, and the average of the objective function was minimized for reducing design uncertainty. The reliability-based design optimization which was implemented the limit state function was formulated into the mathematical model, so the reliable optimized structure was implemented than the base-line design.

• 한국전자통신학회논문지
• /
• 제10권11호
• /
• pp.1231-1238
• /
• 2015

본 논문에서는 노드 모니터링(NM)과 Piecewise Linear Function Approximation(: NP)을 사용하여 LDPC 디코딩 알고리듬의 계산복잡도를 감소시키는 알고리듬을 제안한다. 이 알고리듬은 기존의 알고리듬보다도 더 효율적이다. 제안된 알고리즘이 기존의 방법보다도 개선되었다는 것을 확인하기 위해서 모의실험을 하였다. 실험결과, 제안된 알고리즘의 계산은 기존의 방법에 비해 약 20 % 향상되었음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.504-509
• /
• 2011

The military communication equipment is required the high reliability for operating adequate functions under severe conditions. This reliability is the essential element for the quality of the product, for the uncontrolled factors, such as the clearance, damage of the material, the reduction of stiffness, which are the designer is unable to handle. In this paper, the uncertainty for the design was supposed to the probability model for the military communication equipment, and the average of the objective function was minimized for reducing design uncertainty. The reliability-based design optimization which was implemented the limit state function was formulated into the mathematical model, so the reliable optimized structure was implemented than the base-line design.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.49-55
• /
• 2018

In this paper, we propose schemes of blockchain utilization in tactical communication environment. The military tactical communication environment has similar characteristics with blockchain network such as distributed architecture, decentralization, and the need for data integrity. A communication node constituting a tactical communication network is constituted by a system capable of configuring and connecting a network for each node. When a communication node, having such capabilities, is configured as a node of blockchain network, various functions could be performed. In this paper, we propose utilization schemes of authentication, integrity, record management, and privilege control based blockchain technology. Functions for authentication, integrity verification, and record management need to ensure the stored data and could track history. The requirement of function's characteristics are matched to blockchain which is storing data sequentially and difficult to hack data, so that it could perform functionally and sufficiently well. Functions for authority control should be able to assign different privileges according to the state of the requestor. Smart contract will function when certain conditions are satisfied and it will be able to perform its functions by using it. In this paper, we will look over functions and utilization schemes of blockchain technology which could reliably share and synchronize data in a tactical communication environment composed of distributed network environment.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.163-167
• /
• 2010

In underwater acoustic communication, acoustic signals from transducers or hydrophones are used. And the underwater acoustic communication channels are very complicated, because of vertical distribution of acoustic velocity according depths, and reflections from boundaries like as surface or bottom. For the implementation of the underwater acoustic communication channel, the image method or ray tracing method have been used. In this paper, we introduce a new approach for implementation of underwater acoustic communication channel using the simulation of the Transmission Line Matrix Modeling and cross-correlations from the input and output signals.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.169-176
• /
• 1986

The function of administration and maintenance on the TDX-1 digital switching system, which have been developed in ETRI(Electrotechnology and Telecommunications Research Institute), are reported. In administration, the functions of charging, statistics, data handling, man-mechine communication and I/0 device control are described. In maintenance, the function of fault detection and processing, status handling and alarm described.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.295-295
• /
• 2016

Recently, TCO films with low carrier concentration, high mobility and high work function are proposed beneficial as front electrode in HIT solar cell due to free-carrier absorption in NIR wavelength region and low Schottky barrier height in the front TCO/a-Si:H(p) interface. We report high transmittance and work function zirconium-doped indium tin oxide (ITO:Zr) films with various plasma (Ar/O2 and Ar) conditions. The role of (Ar/O2) plasma was to enhance the work function of the ITO:Zr films whereas the pure Ar plasma based ITO:Zr showed good electrical properties. The RF magnetron sputtered ITO:Zr films with low resistivity and high transmittance were employed as front electrode in HIT solar cells, yield the best performance of 18.15% with an open-circuit voltage of 710 eV and current density of 34.63 mA/cm2. The high work function ITO:Zr films can be used to modify the front barrier height of HIT solar cell.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.426.1-426.1
• /
• 2016

We report high work function Aluminum doped zinc oxide (AZO) films as insertion layer as a function of O2 flow rate between transparent conducting oxides (TCO) and hydrogenated amorphous silicon oxide (a-SiOx:H) layer to improve open circuit voltage (Voc) and fill factor (FF) for high efficiency thin film solar cell. However, amorphous silicon (a-Si:H) solar cells exhibit poor fill factors due to a Schottky barrier like impedance at the interface between a-SiOx:H windows and TCO. The impedance is caused by an increasing mismatch between the work function of TCO and that of p-type a-SiOx:H. In this study, we report on the silicon thin film solar cell by using as insertion layer of O2 reactive AZO films between TCO and p-type a-SiOx:H. Significant efficiency enhancement was demonstrated by using high work-function layers (4.95 eV at O2=2 sccm) for engineering the work function at the key interfaces to raise FF as well as Voc. Therefore, we can be obtained the conversion efficiency of 7 % at 13mA/cm2 of the current density (Jsc) and 63.35 % of FF.