• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.47-56
• /
• 2012

Bicycle has a large amount of kinetic energy available for energy harvesting technology in its speedy and balanced riding movement. Systematic and realistic analysis of its dynamic property is essential to improve the efficiency of energy harvester. However, there has not been enough researches about precise measurement or analysis of bicycle dynamics on real roads. This study aims to investigate the characteristics of vibrational movement of bicycle using MEMS-based accelerometer and to develop a prototype of electromagnetic energy harvester with nonlinear behavior which is proper to the random vibrations accompanied in bicycle riding. The vibrational components have average magnitude of 1 g and turn out to be independent of riding speed. The developed prototype of energy harvester was installed on a front port of a bicycle to use this ambient vibration and generated an average electrical power of 1.5 mW which is enough to support power for most of portable sensors and short range radio-frequency communication. Further study about isolation of vibration from a rider and conversion efficiency is ongoing. The developed energy harvester is expected to be a platform technology for sustainable portable power supply for various smart IT devices and applications.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.42-47
• /
• 2007

To reduce the chattering errors of reed switch sensors in the automatic remote measurement of water meter a reed switch sensor was analyzed and improved. The operation of reed switch sensors can be described as a mechanical contact switch by approximation of permanent magnet piece to generate an electrical pulse. The reed switch sensors are used mostly in measurement application to detect the rotational or translational displacement. To apply for water flow measurement devices, the reed switch sensors should keep high reliability. They are applied for the electronic digital type of water flow meters. The reed switch sensor is just mounted simply on the conventional mechanical type flow meter. A small magnet is attached on a pointer of the water meter counter rotor. Inside the reed sensor two steel leaf springs make mechanical contact and apart repeatedly as rotation of flow meter counter. The counting electrical contact pulses can be converted as the water flow amount. The MCU sends the digital flow rate data to the server using the wireless communication network. But the digital data is occurred difference or won by chattering noise. The reed switch sensor contains chattering error by it self at the force equivalent position. The vibrations such as passing vehicle near to the switch sensor installed location causes chattering. In order to reduce chattering error, most system uses just software methods, for example using filter algorithm and also statistical calibration methods. The chattering errors were reduced by changing leaf spring structure using mechanical characteristics.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.679-691
• /
• 2016

As vehicle started to contain many different communication devices, collecting external information became possible in IoT environment. In such environment, remotely controling vehicle is possible when vehicle information is obtained by looking in to vehicle network through smart device. However, android based smart device applications are vulnerable to malicious modulation and redistribution. Modulated android application can lead to vehicle information disclosure that could bring about vehicle control accident which becomes threat to drivers. furthermore, since vehicles today does not contain security methods to protect it, they are very vulnerable to security threats which can cause serious damage to users and properties. In this paper, many different vehicle management android applications that are sold in Google Play has been analyzed. With this information, possible threats that could happen in vehicle management applications are being analysed to prove the risks. the experiment is done on actual vehicle to prove the risks. Also, access control method to protect the vehicle against malicious actions that could happen through external network in IoT environment is suggested in the paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1788-1795
• /
• 2017

In this paper, we proposed a service that provides CPA/TCPA information to ships, without ARPA/ATA devices to support decision making of the navigator for maritime safety based on various services at shore and off-shore. To verify the proposed service, we use SiNAS (scenario-based simulator for NAS) with CPA/TCPA information providing software to evaluate its usability, because executing the test in real ship has many limitations and difficulties. To do this, we specify two simulation scenarios for the required purpose, and we liaise twelve participants with various navigation experience to conduct the simulations. Also, we analyze the results of simulation using mission success or not, the minimum approaching distance with the target ship, the time of a recognition the target ship, the time of a first action for collision avoidance with the target ship, and so on. Then, we evaluate usability of the proposed service based on the three elements which are effectiveness, efficiency and satisfaction.

• The KIPS Transactions:PartA
• /
• v.16A no.4
• /
• pp.227-234
• /
• 2009

OSGi technology has applied to Home Network, but now it is loaded into even heterogeneous devices in various domains. Therefore, it is necessary to cooperate with each other framework for offering effective services in distributed OSGi frameworks. However until now, OSGi specification doesn't provide any methodthat can share the services registered on remote OSGi frameworks. In order to solve this problem, there have been several researches that used existing distributed middleware technologies such as JXTA and Web Services. However these technologies have some weakness, that is, they consume lots of computing resources and need additional process to transform the services. A middleware called R-OSGi uses only OSGi technology for sharing remote OSGi services, but R-OSGi may have a communication bottleneck and SPOF (Single Point of Failure) problem, because it has a central service registry. In this paper we present RSP (Remote Service Provider), which is a P2P-based effective service sharing scheme on distributed OSGi framework. RSP doesn't need to install additional software nor have the additional transformation process of the service representation, because it uses only OSGi technology. In addition it doesn't have any bottleneck problem and improves scalability by providing the service discovery mechanism using P2P. RSP can also access remote services transparently and it can guarantee reliability by sending an immediate notice about changes of the remote services.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.65-72
• /
• 2009

Due to the popularity of mobile devices and advances in wireless communication technologies, a mobile ad hoc network has received a lot of attention. In the existing data replication management research, the use of a replica has been shown to be an efficient technique for improving data accessibility. However, to use a replica in ad hoc networks, the data consistency between the original data and the replica should be guaranteed. In the traditional research, a mobile node should check an original data whether the data is updated or not. However, It may be costly or sometimes impossible to check the original data. In the case of the time constraint applications, the checking cost can cause more serious problem. In this paper, we propose the time-guarantee based cache invalidation schemes for time constraint applications and the threshold based compensation method to enhance the time-guarantee based scheme. The proposed schemes can remove the "rollback" problem. Simulation results show that our schemes outperform the previous ones in terms of access time with little loss of data currency.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.47-53
• /
• 2011

The Electric Multiple Unit (EMU) has many types of door system such as sliding door, plug door etc.al. according to customer's requirements. The sliding door is widely used in Korea but has weak point in the noise problem. In the low operation speed, the noise coming from outer side of the EMU is not an important factor. As the speed is higher than before, noise is increased and make a problem. The main cause of noise is the imperfect air tightness in the EMU. The plug door system has advantages for the noise reduction characteristic in the high speed area. We have been developing electric plug-in door. The door is controlled by Door Control Unit(DCU) following the order of Automatic Train Protection (ATP) that is a kind of train signalling system. DCU has to simultaneously open and close the doors and the operation of it is related to the passengers safety. So DCU is a safety device that is important to reliability and safety. DCU is composed of several devices of control, motor driving, Input/Output, communication and power. In this paper, we will describe the functions, characteristic, requirement, subsystem and test results of DCU used for the electric plug-in door.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.337-351
• /
• 2018

This paper discusses 5G IOT, Augmented Reality, Cloud Computing, Big Data, Future Autonomous Driving Vehicle technology, and presents 5G utilization of Pyeongchang Winter Olympic Games and Jeju Smart City model. The reason is that 5G is the main artery of the 4th industry.5G is the fourth industrial aorta because 5G is the core infrastructure of the fourth industrial revolution. In order for the AI, autonomous vehicle, VR / AR, and Internet (IoT) era to take off, data must be transmitted several times faster and more securely than before. For example, if you send a stop signal to LTE, which is a communication technology, to a remote autonomous vehicle, it takes a hundredth of a second. It seems to be fairly fast, but if you run at 100km / h, you can not guarantee safety because the car moves 30cm until it stops. 5G is more than 20 gigabits per second (Gbps), about 40 times faster than current LTE. Theoretically, the vehicle can be set up within 1 cm. 5G not only connects 1 million Internet (IoT) devices within a radius of 1 kilometer, but also has a speed delay of less than 0.001 sec. Steve Mollenkov, chief executive officer of Qualcomm, the world's largest maker of smartphones, said, "5G is a key element and innovative technology that will connect the future." With 5G commercialization, there will be an economic effect of 12 trillion dollars in 2035 and 22 million new jobs We can expect to see the effect of creation.

• Informatization Policy
• /
• v.20 no.2
• /
• pp.60-72
• /
• 2013

Rapid development of information and communication technologies leads firms to take 'smart work' into serious consideration as a new way of working in coming knowledge and information society. However, some jobs may be fit for smart work while some may be not. A $2{\times}2$ framework for smart work readiness assessment is developed in this study through the review of extant literature and a series of focus group activities. Two critical dimensions of smart work are derived and presented as a result: smartness (knowledge versus data) and mobility (mobile versus static). Knowledge intensive jobs with possible mobility seem to be the target group that can be easily converted to smart work while mobile workers with interactive data processing devices seem to be already doing smart work. As mobility is a critical presumption for work to be flexible in terms of time and place, jobs with no mobility are assessed here as not ready for smart work at least at present. This framework is experimentally applied against the published job statistics 2011 in Korea, and used to estimate the number of workers ready for smart work. As a conclusion, discussions on policy implications and further research issues are made at the end.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.235-244
• /
• 2000

We studied basic ideas of a network based Gravity/Magnetic data processing server/client system which provides functions of data processing, forward modeling, inversion and data process on Data Base. This Java technology was used to provide facilities, socket communication and JDBC(Java Database Connectivity) technology to produce an effective and practical client application. The server computers are linked by network to process the MPI parallelized computing. This can provide useful devices of the geophysical process and modeling that usually require massive computing performance and time. Since this system can be accessed by lots of users, it can provides the consistent and confident results through the verified processing programs. This system also makes it possible to get results and outputs through internet when their local machines are connected to the network. It can help many users who want to omit the jobs of system administration and to process data during their field works.