• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.231-234
• /
• 2000

In this paper, we formed a transmitter and receiver by using three identical Chuas circuits and then formed wire and wireless transmission line from the channel which was between those three circuits. We proposed a secure communication method in which the desired information signal was synthesized with the chaos signal created in a Chuas circuit and sent to the transmitter through channel. Then the signal was demodulated receiver of Chuas circuit. The method we used to accomplish the secure communication was synthesizing the desired information with the chaos circuit by parallel connection in a wireless transmission line. After transmitting the synthesized signal to the wire and wireless transmission line, we confirmed the actuality of the secure communication by separating the information signal and the chaos signal in the receiver.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.263-266
• /
• 2000

In this paper, we formed a transmitter and receiver by using two identical Chua's circuits and then formed wireless transmission line from the channel which was between those two circuits. We proposed a secure communication method in which the desired information signal was synthesized with the chaos signal created in a Chua's circuit and sent to the transmitter through channel. Then the signal was demodulated receiver of Chua's circuit. The method we used to accomplish the sun communication was synthesizing the desired information with the chaos circuit by parallel connection in a wireless transmission line. After transmitting the synthesized signal to the wireless transmission line, we confirmed the actuality of the secure communication by separating the information signal and the chaos signal in the receiver. In order to confirm the security, we compared the wiretapped signal and the recovery signal under the assumption that the wiretapping had taken place. In order to separate the two signals, we transformed the information signal to a current source in the transmitter and detected the current in the receiver.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.238-241
• /
• 2000

In this paper, we formed a transmitter and receiver by using two identical Chua's circuits and then formed wireless transmission line from the channel which was between those two circuits. We proposed a secure communication method in which the desired information signal was synthesized with the chaos signal created in a Chua's circuit and sent to the transmitter through channel. Then the signal was demodulated receiver of Chua's circuit. The Method we used to accomplish the secure communication was synthesizing the desired information with the chaos circuit by parallel connection in a wireless transmission line. After transmitting the synthesized signal to the wireless transmission line, we confirmed the actuality of the secure communication by separating the information signal and the chads signal in the receiver. In order to confirm the security, we compared the wiretapped signal and the recovery signal under the assumption that the wiretapping had taken place. In order to separate the two signals, we transformed the information signal to a current source in the transmitter and detected the current in the receiver.

• 공학교육연구
• /
• 제2권1호
• /
• pp.10-16
• /
• 1999

본 논문에서는 인터넷을 이용한 디지탈 논리회로 설계 및 모의실험실습을 위한 교육용 소프트웨어 패키지(DVLab)를 개발하였다. 개발된 패키지는 디지탈 조합/순차회로는 물론 마이크로콘트롤러 응용회로까지 설계하고 시뮬레이션할 수 있는 모듈, 브레드보드 시뮬레이터 모듈, 실험항목별 이론 강의를 위한 모듈, 보고서 작성 및 보고서 자동검사 모듈 등을 포함하고 있다. 개발된 모든 모듈들은 독립적인 응용 프로그램으로 뿐만 아니라 인터넷을 이용한 사용이 가능하며, 특히 시뮬레이터 모듈의 경우 실시간 클럭 제공, 설계회로도 상에서 직접 소자의 출력값 확인, 논리값 변화 기록 기능, 설계회로 복사 방지 기능, 다양한 논리회로 소자뿐만 아니라 LED, buzzer등과 같은 시각적, 청각적 소자 제공 등의 특징을 가진다. 또한 개발된 교육용 패키지를 이용한 디지탈 논리회로 실험실습 과목의 학습 모형을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1959-1960
• /
• 2008

The Logic Built In Self Test (LBIST) technique is substantially applied in chip design in most many semiconductor company in despite of unavoidable overhead like an increase in dimension and time delay occurred as it used. Currently common LBIST software uses the MISR (Multiple Input Shift Register) However, it has many considerations like defining the X-value (Unknown Value), length and number of Scan Chain, Scan Chain and so on for analysis of result occurred in the process. So, to solve these problems, common LBIST software provides the solution method automated. Nevertheless, these problems haven't been solved automatically by Tri-state Bus in logic circuit yet. This paper studies the algorithm that it also suggest algorithm that reduce additional circuits and time delay as matching of pattern about 2-type circuits which are CUT(circuit Under Test) and additional circuits so that the designer can detect the wrong location in CUT: Circuit Under Test.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.34-44
• /
• 2006

시스템 온 칩(SoC) 설계에서는 설계 시간을 줄이기 위해서 미리 검증된 IP(Intellectual Property) 하드웨어 블록을 사용한다. 서로 다른 통신 프로토콜을 사용하는 IP간의 연결을 위해서는 인터페이스 회로가 필요하다. SoC 설계에는 인터페이스 회로 설계가 빈번하게 발생하며, 오류발생 가능성이 높다. 따라서 인터페이스 회로의 자동생성이 필요하다. IP의 통신 프로토콜을 입력으로 인터페이스 회로를 생성하는 여러 연구가 진행되어 왔다. 그러나 IP의 통신 프로토콜만으로는 인터페이스 회로를 생성하기 어려운 경우가 있다. 주소를 사용하는 IP와 주소를 사용하지 않는 IP간 연결, 주소/데이터가 여러 포트로 전송되는 IP와 하나의 포트로 전송되는 IP간 연결, 매 전송마다 주소와 데이터가 함께 전송되는 IP와 하나의 시작주소에 여러 데이터가 전송되는 IP간의 연결 등에서는 기존 방법에 의한 인터페이스 회로의 자동 생성이 어렵다. 그것은 기존의 방법들이 IP 특성에 따른 범주 구분과, 특성간의 대응에 따라 합성 알고리즘도 변해야 함을 고려하지 않았기 때문이다. 본 논문에서는 IP의 통신프로토콜 특성에 따라 범주를 나누고, 어떤 특성을 갖는 IP의 연결인 지에 따라 인터페이스 합성 알고리즘이 이를 고려할 수 있도록 하였다. 실험에서는 다양한 특성을 갖는 IP 간 연결을 위한 인터페이스 회로를 생성하고 검증했음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2072-2074
• /
• 2001

In this paper, a transmitter and a receiver using two identical Hyper-Chaos that n-double scroll circuits are proposed and a hyper-chaos synchronizations and secure communication are investigated. we are proposed unidirectional coupling of identical n-double scroll cell for hyper-chaos synchronization. We've shown that simulation result is synchronization and secure communication.

• Journal of information and communication convergence engineering
• /
• 제13권3호
• /
• pp.180-188
• /
• 2015

As a potential alternative to the complementary metal-oxide semiconductor (CMOS) technology, many researchers are focusing on carbon-nanotube field-effect transistors (CNFETs) for future electronics. However, existing studies report the advantages of CNFETs over CMOS at the device level by using small-scale circuits, or over outdated CMOS technology. In this paper, we propose a methodology of analyzing CNFET-based circuits and study its impact at the full-chip scale. First, we design CNFET standard cells and use them to construct large-scale designs. Second, we perform parasitic extraction of CNFET devices and characterize their timing and power behaviors. Then, we perform a full-chip analysis and show the benefits of CNFET over CMOS in 45-nm and 20-nm designs. Our full-chip study shows that in the 45-nm design, CNFET circuits achieve a 5.91×/3.87× (delay/power) benefit over CMOS circuits at a density of 200 CNTs/µm. In the 20-nm design, CNFET achieves a 6.44×/3.01× (delay/power) benefit over CMOS at a density of 200 CNTs/µm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.333-340
• /
• 2017

In this paper, we describe HW/SW co-optimizations for reconfigurable application specific instruction-set processors (ASIPs). Based on our previous very long instruction word (VLIW) ASIP, the proposed framework realizes various forward error-correction (FEC) algorithms for wireless communication systems. In order to enhance the energy efficiency, we newly introduce several design methodologies including high-radix algorithms, task-level out-of-order executions, and intensive resource allocations with loop-level rescheduling. The case study on the radix-4 turbo decoding shows that the proposed techniques improve the energy efficiency by 3.7 times compared to the previous architecture.

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.893-899
• /
• 2008

본 논문에서는 C++기반 동작 레벨 회로 시뮬레이션 프로그램인 CPPSIM을 이용하여 전압 조절기와 PLL을 구현하고 시뮬레이션 하였다. 아날로그 회로를 C++코드로 모델링 후 시뮬레이션을 통해 시뮬레이션 툴의 유효성을 살펴보았으며, 아날로그 회로의 단계별 설계와 가능성을 타진하였다. 시뮬레이션 결과 회로의 동작 레벨에서의 설계가능성을 검증할 수 있었다. 또한 PLL을 디지털 신호기반으로 구현하여 아날로그 회로의 디지털화를 시도하였다.