• 제목/요약/키워드: communication cable

검색결과 439건 처리시간 0.028초

사고현장과 사령실간 화상전송기술에 관한 연구(II) (A study on the moving picture transmission method between the accident sites and control center(II))

  • 장석각;조봉관
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(III)
    • /
    • pp.653-658
    • /
    • 2003
  • This study is represented a method to give connect to optical cable from accident site and reviewed the method to transmission a moving image to control centre by real time, following the study of image transmission method in copper cable section where is a main line of railroad communication. Concept of network is studied to use cable and equipment effectively, and it's also reviewed technology of digital image transmission system and image evaluation methods, in spite of the pixel of camera and monitor resolution determine quality of image when moving image transferring by point to point. In addition, this study is reviewed checks and considerations of image transmission equipment (codec) with various transmission methods in room test, and then examined and analyzed wire/wireless combined transmission methods at wayside.

  • PDF

케이블 TV 전송선로의 특성 개선을 위한 접지방식 (Grounding method for Improving of the Characteristics on Cable TV Transmission Line)

  • 황종선;김영민;연제진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
    • /
    • pp.37-40
    • /
    • 2002
  • Ground connection began by experimenting lightning with the use of a kite and it means electric appliances, communication equipments, measuring instruments and so on connecting the Earth in order to flow away overcharged electricity. There are two kinds of earth connection: Power Ground and Signal Ground. Power Ground is for preventing an electric shock and in general there's no current in the connector. However in an accident, there's a quick flow of electricity out to the Earth. Signal Ground is not only for the safety of appliances but also for the safety of equipment operation. This paper is about connection for noise and interference reduce in order to prevent wrong operation and distortion of signal in the electrical appliances which can take place in cable TV.

  • PDF

오차 보정 방법을 이용한 시간 영역 임피던스 측정의 정확도 개선 (Accuracy Improvement of Time Domain Impedance Measurement Using Error Calibration Method)

  • 노현승;;김양석;채장범;김병성
    • 한국전자파학회논문지
    • /
    • 제23권11호
    • /
    • pp.1315-1322
    • /
    • 2012
  • 주파수 영역 반사 진단법은 케이블의 임피던스 값을 측정하여 케이블의 고장점 위치를 진단한다. 전력 케이블 진단과 같이 험한 환경 또는 활성 상태에서의 진단을 위해서는 회로망 분석기보다 오실로스코프를 이용한 시간 영역 임피던스 측정이 널리 사용되고 있다. 그러나 시간 영역에서 임피던스 측정은 주파수가 증가하면 각종 기생 성분에 의해 임피던스 오차가 증가하여, 고장점 진단의 정밀도가 떨어진다. 본 논문에서는 시간 영역 임피던스 측정에 연산증폭기를 이용한 측정 시스템을 구현하고, 오차 보정 방법을 도입하여 좀 더 광대역에서 정확한 시간 영역 임피던스 측정을 수행하는 방법을 제시하고, 실제 케이블 측정 결과를 비교하여 제안된 방법을 검증한다.

다중 대역용 차세대 이동통신 기지국 시스템의 전력 및 탄소배출량 절감효과 분석 (The Analysis of Reducing Power Consumption and CO2 Emission in the Advanced Mobile Communication Base Station)

  • 오승곤;안준오;김부균
    • 한국통신학회논문지
    • /
    • 제36권6B호
    • /
    • pp.642-649
    • /
    • 2011
  • 본 논문은 다중 대역에서 동작하는 안테나를 장착한 차세대 이동통신 기지국 시스템의 도입 가능성 분석을 위해 종래의 기지국 시스템과 케이블 손실전력을 고려한 차세대 기지국 시스템의 전력 손실 및 탄소 절감효과를 분석하였다. 차세대 기지국 시스템은 옥외에 무선처리부를 설치하고, 옥내의 기저대역처리부는 광케이블로 연결하여 종래의 기지국에서 케이블로 인해 발생하는 전력손실을 없애는 구조이다. 본 연구 결과 종래의 기지국과 비교하여 동일한 서비스 커버리지 확보가 가능하고, 케이블 전력손실이 5 dB 줄어든 차세대 기지국 시스템을 도입할 경우 CDMA 20W, WCDMA 30W, WiBro 10W 기지국에서 소모하는 전력량은 연간 155,078 MWh에서 49,038 MWh로 감소시킬 수 있으며, 탄소배출량 또한 65,878 $tCO_2$에서 20,832 $tCO_2$로 절감됨을 확인하였다. 따라서 차세대 기지국 시스템은 그린 IT 기술로 이용 가능할 것으로 고찰되었다.

케이블-기반 개폐식 지붕의 모니터링을 위한 영상 전송 장치 개발 (Development of Video Transmission Device for Monitoring of a Cable-Based Retractable Roof)

  • 안수홍;손수덕;이승재;강주원
    • 한국공간구조학회논문집
    • /
    • 제19권4호
    • /
    • pp.103-110
    • /
    • 2019
  • The cable-based retractable membrane roof makes it impossible to maintain its shape and stiffness during driving process, unlike the hard-type retractable roof. Consequently, monitoring using a relatively simple wireless video transmission device is required. However, since video data has a bigger transmission rating than other monitoring data in terms of the structure velocity or acceleration, there is a need to develop transmission device that is easy to install and entails low maintenance cost. This paper studies on a real-time video transmission system for monitoring the cable-based retractable membrane roof while driving. A video transfer software, using the mobile network, is designed and the embedded system is constructed. Ultimately, the data transmission server is tested. Connecting a trolley to the system allows testing of the validity and efficiency of the developed system through the video data transmitted in the driving process. Result of the test shows that the developed system enables multi-device data transfer with monitoring via the mobile network.

해저케이블 작업에서의 KP와 XTE 구현을 위한 최적화 알고리즘 (Optimization Algorithm for KP and XTE Implementation on the Submarine Cable Work)

  • 이태오;임재홍
    • 한국정보통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.423-436
    • /
    • 2003
  • 해저 광케이블 공사는 해양조사, PLGR(Pre Lay Grapnel Run), 천해부공사, 포설/매설 순서로 이루어진다. PLGR은 해저 광케이블 매설전에 루트상의 해양 오염물(로프, 와이어, 그물, 어망 등)을 사전에 제거하는 작업이다. 이러한 PLGR은 케이블의 해저면 안착을 용이하게 하고, Plough 및 ROV(Remotely-Operated Vehicle) 매설작업의 성능을 향상시키며, 매설장비를 보호하기 위한 작업이다. 본 논문은 해양조사, PLGR 작업을 효율적으로 관리하기 위한 항해 누적 거리(KP Kilometer Post)와 경로 이탈 오차(XTE : Cross Track Error)의 최적화 알고리즘 구현에 대해서 논한다. 본 논문에서는 이를 위하여 전체적인 PLGR 작업을 구성하고, 항해 누적 거리와 경로 이탈 오차의 최적화 알고리즘을 제안하였다. 그리고 현재 진행중인 PLGR 작업의 일부 루트를 따라서 KP와 XTE 결정 알고리즘을 실험하였다.

변류기를 이용한 자가발전 장치의 설계와 특성 (Design and Properties of a Self Generation Equipment using Current Transformer)

  • 변우봉;김현식;김종령;이해연;이준희;지민권;이진;오영우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.427-428
    • /
    • 2008
  • We have studied design and application about an self generation equipment for underground power transmission cable. The split CT(Current Transformer), which has the applicable underground power transmission cable, was manufactured through electromagnetic simulation of magnetic core. And manufactured the AC-DC converter that supplied stable DC power for PLC modem when current of power line has more than 150A. An self generation equipment using the CT and AC-DC converter get into operation the PLC modem consistently. As a result, the underground power transmission cable was showed the application possibility through the stable communication and network characteristics.

  • PDF

고소지역 작업현장에서 공중선 상태 진단 모듈 기반 정비 지원 장치 개발 (Development of a Diagnostic Module Based Maintenance Support Device for Fiber Optic Telecommunication Cable in Overhead Region)

  • 김희철
    • 한국전자통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.469-474
    • /
    • 2014
  • 전신주에 설치된 난립 통신선로의 포설 상태를 모니터링하고, 정비용 부가정보 수단을 제공할 수 있는 현장 모니터링 지원 시스템을 개발한다. 공중선로 정비 지원을 위한 모니터링 모듈 및 정보 처리 어플리케이션을 적용 임베디드 시스템을 제작한다. 본 연구에서는 정부의 공중선 정비 종합계획에 따라 작업 안전사고 예방 지원 장치로 보급하기 위한 대도시 공중선 정비 사업에 즉시 활용하고, 고소 공사 편의 및 작업자의 정비 효율성을 제고하는데 목적을 둔다.

직류 전력케이블용 반도전 복합체의 열적 특성 (Thermal Properties of Semiconductive Composites for DC Power Cable)

  • 이기정;서범식;양종석;성백룡;박대희
    • 한국전기전자재료학회논문지
    • /
    • 제26권1호
    • /
    • pp.49-55
    • /
    • 2013
  • In this paper, semiconducting shield specimens for a DC cable os fabricated and characterized by measurement of volume resistance, tensile strength, and the coefficient of expansion to show the electrical and mechanical characteristics of the semiconducting shield. Due to the PTC phenomenon, the volume resistance at $25^{\circ}C$ increases rapidly in comparison to the volume resistance at $90^{\circ}C$. Since the compounding ration of carbon black is low, the tensile strength and density become lower and the coefficient of expansion is increased. As the general specification of the tensile strength and density is $0.8kgf/mm^2$ and 150%, respectively, the fabricated specimen in this paper has excellent mechanical characteristic.

USN기반의 교량 모니터링 시스템 구현 (Implementation of A Bridge Monitoring System Based on Ubiquitous Sensor Networks)

  • 이성화;전민석;이안규;김진태
    • 한국인터넷방송통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.1-8
    • /
    • 2009
  • 본 연구 이전에 제안되었던 실시간 교량 모니터링 시스템은 교량 곳곳에 배치되어 있는 센서들로부터 중앙서버로 동축 케이블을 통해 데이터를 송수신하였는데, 동축 케이블을 이용하여 교량 전체의 센서들의 네트워크를 구성하기 위해서는 막대한 인력과 비용이 따르게 된다. 본 연구에서는 USN을 기반으로 한 교량 모니터링 시스템 제안하고, 이에 대한 프로토타입을 설계 및 구현하였다. HSDPA를 통해 얻은 센싱 데이터 값을 TCP/IP 소켓을 통해 교량 모니터링 서버에 전달함으로써 양방향 통신을 구축하여 그래프 변환을 하는 전체 시스템을 구현하였다.

  • PDF