• Title/Summary/Keyword: common source

Search Result 1,029, Processing Time 0.027 seconds

A Design and Fabrication of a 0.18μm CMOS Colpitts Type Voltage Controlled Oscillator with a Cascode Current Source (0.18μm NMOS 캐스코드 전류원 구조의 2.4GHz 콜피츠 전압제어발진기 설계 및 제작)

  • Kim, Jong-Bum;You, Chong-Ho;Choi, Hyuk-San;Hwang, In-Gab
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.59 no.12
    • /
    • pp.2273-2277
    • /
    • 2010
  • In this paper a 2.4GHz CMOS colpitts type microwave oscillator was designed and fabricated using H-spice and Cadence Spetre. There are 140MHz difference between the oscillation frequency and the resonance frequency of a tank circuit of the designed oscillator. The difference is seemed to be due to the parasitic component of the transistor. The inductors used in this design are the spiral inductors proposed in other papers. Cascode current source was used as a bias circuit of a oscillator and the output transistor of the current source is used as the oscillation transistor. A common drain buffer amplifier was used at the output of the oscillator. The measured oscillation frequency and output power of the oscillator are 2.173GHz and -5.53dBm.

The transition of dominant noise source for different CMOS process with Cgd consideration (Cgd 성분을 포함한 공정별 주요 잡음원 천이 과정 연구)

  • Koo, Minsuk
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.24 no.5
    • /
    • pp.682-685
    • /
    • 2020
  • In this paper, we analyze the dominant noise source of conventional inductively degenerated common-source (CS) cascode low noise amplifier (LNA) when width and gate length of stacked transistors vary. Analytical MOSFET and its noise model are used to estimate the contributions of noise sources. All parameters are based on measured data of 60nm, 90nm and 130nm CMOS devices. Based on the noise analysis for different frequencies and device parameters including process nodes, the dominant noise source can be analyzed to optimize noise figure on the configuration. We verified analytically that the intuctively degenerated CS topology can not sustain its benefits in noise above a certain operation frequency of LNA over different process nodes.

Design of a 1-Gb/s CMOS Optical Receiver for POF Applications (1-Gb/s CMOS POF 응용 광수신기 설계)

  • Lee, Jun-hyup;Lee, Soo-young;Jang, Kyu-bok;Yu, Chong-gun
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2012.10a
    • /
    • pp.241-244
    • /
    • 2012
  • In this paper, three types of optical receivers are designed using a $0.35-{\mu}m$ standard CMOS technology for plastic optical fiber (POF) applications. Basic common-source transimpedance amplifier (CS-TIA), common-gate TIA (CG-TIA), and regulated-cascode TIA (RGC-TIA) are optimally designed, and their transimpedance gain (TZ gain), 3-dB bandwidth, and noise characteristics are compared and analyzed. As a result of simulations, the RGC-TIA indicates better TZ gain and 3-dB bandwidth than other topologies, and CS-TIA has the best noise performance. Each optical receiver occupies area of $0.35mm^2$.

  • PDF

Design and Fabrication of a GaAs MESFET MMIC Transmitter for 2.4 GHz Wireless Local Loop Handset (2.4 GHz WLL 단말기용 GaAs MESFET MMIC 송신기 설계 및 제작)

  • 성진봉;홍성용;김민건;김해천;임종원;이재진
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.11 no.1
    • /
    • pp.84-92
    • /
    • 2000
  • A GaAs MESFET MMIC transmitter for 2.4 GHz wireless local loop handset is designed and fabricated. The transmitter consists of a double balanced active mixer and a two stage driver amplifier with voltage negative feedback. In particular, a pair of CS-CG(common source-common gate) structure compensates the reduction in dynamic range caused by unbalanced complementary IF input signals. And to suppress the leakage local power at RF port, the mixer is designed by using phase characteristic between the ports of MESFET. At the bias condition of 2.7 V and 55.2 mA, the fabricated MMIC transmitter with chip dimensions of $0.75\times1.75 mm^2$ obtains a measured conversion gain of 38.6 dB, output $P_{idB}$ of 11.6 dBm, and IMD3 at -5 dBm RF output power of -31.3 dBc. This transmitter is well suited for WLL handset.

  • PDF

Statistical Analysis for Chemical Characterization of Fall-Out Particles (강하분진의 화학적 특성파악을 위한 통계학적 해석)

  • Kim, Hyeon-Seop;Heo, Jeong-Suk;Kim, Dong-Sul
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.14 no.6
    • /
    • pp.631-642
    • /
    • 1998
  • Fall-out particles were collected by the modified British deposit gauges at 35 sampling sites in Suwon area from January to November, 1996. Twenty chemical species (Al. Ba, Cd, Cr, K, Pb, Sb, Zn, Cu, Fe, Ni, V, F-, Cl-, NO3-, 5042-, Na+, NH4+, Mg2+, and Ca2+) were analyzed by AAS and If. The purposes of this study were to estimate qualitatively various emission sources of the fell-out particle by applying multivariate statistical techniques such as factor analysis, multiple regression analysis, and discriminant analysis. During the study, outlier sites were determined by a z-score method. Cl-, Na+, Mg2+, and SO42- were highly correlated due to their common marine related source. Wind speed was the most influential factor for the deposition fluxes of the particle itself and all the chemical species as well. When applying the factor analysis, 8 source patterns were qualitatively obtained, such as marine source, soil source, oil burning source, Cr related source, tire source, Cd related source, agriculture source, and F- related source. As a result of the multiple regression analysis, we could suggest that some chemical compounds may possibly exist in the form of CaSO4, NaN03, NaCl, MgC12, (NH4)2SO4, NaF, and CaCl2 in the fall-out particles. Finally, spatial and seasonal classification study performed by a discriminant analysis showed th.at SO42-, Ca2+, Cl-, and Fe were dominant in the group of spatial pattern; however, SO42-, Cl-, Al, and V were in the group of seasonal pattern.

  • PDF

A study on the accommodation of common LED to shipboard (육상용 LED 램프의 선박 적응력에 관한 연구)

  • Jeong, Ji-Hyun;Park, Hwan-Chul;Kim, Yong-Joo;Seo, Sang-Do;Han, Seung-Jae;Kim, Min-Sok
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.46 no.4
    • /
    • pp.503-508
    • /
    • 2010
  • Common LED (Light Emitting Diode) lamp has many advantages to compare with fluorescent lamp, long life and no pollution matter like the mercury. The LED lamp is a good light source especially for shipboard lighting because of its compact structure which prevents explosion and shock. Also, low maintenance cost is expected due to its longer life time in comparison with conventional lamps. The LED lamp, however, need some estimates that change of voltage and frequency, vibration, moisture on board to definite accommodation of the LED lamp to shipboard. The purpose of this study is to compare physical properties of a fluorescent lamp with one of the common LED lamp so as to analyze accommodation of common LED lamp on board. This study was carried out in two stages. First, temperature, humidity of illumination, voltage, electric current, frequency and electric power were measured by using experimental equipments. Second, a comparative analysis of consumption electric power, annual oil charge, annual CO2 emission and lamp life time, etc of the fluorescent lamp and common LED one was made. As a result of the study, the consumption electric power of fluorescent lamp was 50% higher than one of the common LED lamp. As a result of measuring life time, it was found that life time of common LED lamp was more about 3.5 fold than one of the fluorescent lamp. Considering these results, it's thought that common LED lamp is verified that energy saving is possible and using is possible as substitute for fluorescent lamp on board.

Probabilistic Safety Assessment of Nuclear Power Plants Using Alpha Factor Method for Common Cause Failure (알파모수 공통원인고장 평가 기법을 활용한 원자력발전소 안전성 평가)

  • Hwang, Seok-Won
    • Transactions of the Korean Society of Pressure Vessels and Piping
    • /
    • v.10 no.1
    • /
    • pp.51-55
    • /
    • 2014
  • Based on the results of Probabilistic Safety Assessment(PSA) for a Nuclear Power Plant (NPP), Common Cause Failure(CCF) events have been recognized as one of the main contributors to the risk. Also, the CCF data and estimation method used in domestic PSA models have been pointed out as an issue with respect to the quality. The existing method of MGL and non-staggered testing even widely used were considered conservative in estimating the safety and had a limited capability in uncertainty analyses. Therefore, this paper presents the CCF estimation using a new generic data source and Alpha factor method. The analyses showed that Alpha factor and staggered method are effective in estimating the CCF contribution and risk insights of reference plant. This method will be a common bases for the optimization of new design for the construction plants as well as for the updating of safety assessment on the operating nuclear power plants.

Nutritional management of breastfeeding infants for the prevention of common nutrient deficiencies and excesses

  • Moon, Jin-Soo
    • Clinical and Experimental Pediatrics
    • /
    • v.54 no.7
    • /
    • pp.282-286
    • /
    • 2011
  • Breastfeeding is the best source of nutrition for every infant, and exclusive breastfeeding for 6 months is usually optimal in the common clinical situation. However, inappropriate complementary feeding could lead to a nutrient-deficient status, such as iron deficiency anemia, vitamin D deficiency, and growth faltering. The recent epidemic outbreak of obesity in Korean children emphasizes the need for us to control children's daily sedentary life style and their intakes of high caloric foods in order to prevent obesity. Recent assessment of breastfeeding in Korea has shown that the rate is between 63% and 89%; thus, up-to-dated evidence-based nutritional management of breastfeeding infants to prevent common nutrient deficiencies or excesses should be taught to all clinicians and health care providers.

Women's Street Fashion in World Fashion-Leading Cities (Classification and Style Analysis)

  • Kim, Chan-Ju
    • Proceedings of the Korea Society of Costume Conference
    • /
    • 2003.10a
    • /
    • pp.68-68
    • /
    • 2003
  • Recently, street fashion has been regularly introduced in many fashion media because both consumers and marketers began to recognize the importance of street fashion as a meaningful and objective fashion information source. As the globalization proceeds in fashion field,' the street fashion informations in major cities which has led world fashion trends become more influential on domestic fashion, but little concern has been paid on it. This study classified women's street fashion in 4 major world fashion cities such as Paris, London, New York, Tokyo and identified style characteristics of each group. For data collection, 795 front-view photos were selected from the two fashion trade publication 'STREET' and 'VIEW' which has introduced street fashion photos in those cities from 1996. Classification process went on three stages: sorting, naming and grouping. 49 undergraduate students were divided into 12 teams and about 80 photos were given to each team to sort into several sub-groups by overall images or common style characteristics. Then each sub-group was named according to common images or characteristics. Final groups came out after grouping each sub-group with a similar or same title together. For each group, common style characteristics were analyzed.

  • PDF

Studies on the 2.17 GHz Voltage Controlled Oscillator (2.17 GHz 전압제어 발진기 제작연구)

  • 이지형;이문교;설우석;임병옥;이진구
    • Proceedings of the IEEK Conference
    • /
    • 2001.06a
    • /
    • pp.421-424
    • /
    • 2001
  • In this paper, We have designed and fabricated VCO in two way, the common source and common gate circuit for I local oscillator of 60 GHz wireless LAN system. The VCO employed a GaAs MESFET for negative resistance and a varactor diode for frequency tuning. The common gate VCO was measured the phase noise -112 dBc/Hz at the 1 MHz frequency offset. The output power and the second harmonic frequency suppression were 7.81 dBm and -29.3 dBc when tuning voltage was 3V, respectively. The total size of VCO was 28.6$\times$12.14 $\textrm{mm}^2$.

  • PDF