• 가정∙방문간호학회지
• /
• 제19권2호
• /
• pp.195-203
• /
• 2012

Purpose: This study is conducted to investigate the stress level, stress source and stress coping of nursing students in college. Methods: This study was a cross sectional survey and the data was collected from 341 nursing students by means of self-reported questionnaires from April 2 to May 31, 2012. Collected data were analyzed on SPSS win 18.0. Results: The nursing students experienced moderate levels of stress. The source of stress for students came from 'one's own self'. The most common stress coping used by students was 'make a wish'. There were significant differences in the source of stress and the stress coping according to the nursing students' year of school and other general characteristics, such as motivation of entrance and satisfaction in school life. Conclusion: These results suggest that it is important to develop stress management program and strategies based on nursing students' individual characteristics and sources of stress.

• 대한의용생체공학회:의공학회지
• /
• 제26권4호
• /
• pp.215-221
• /
• 2005

We describe the development of a prototype multi-channel electrical impedance tomography (EIT) system. The EIT system can be equipped with either a single-ended current source or a balanced current source. Each current source can inject current between any chosen pair of electrodes. In order to reduce the data acquisition time, we implemented multiple digital voltmeters simultaneously acquiring and demodulating voltage signals. Each voltmeter measures a differential voltage between a fixed pair of adjacent electrodes. All voltmeters are configured in a radially symmetric architecture to optimize the routing of wires and minimize cross-talks. To maximize the signal-to-noise ratio, we implemented techniques such as digital waveform generation, Howland current pump circuit with a generalized impedance converter, digital phase-sensitive demodulation, tri-axial cables with both grounded and driven shields, and others. The performance of the EIT system was evaluated in terms of common-mode rejection ratio, signal-to-noise ratio, and reciprocity error. Future design of a more innovative EIT system including battery operation, miniaturization, and wireless techniques is suggested.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.541-546
• /
• 1999

자유 공간에서 음원으로부터 사람의 귀로 음향적인 전단 과정을 표현하는 머리전달함수는 사람이 음원의 위치를 판단할 수 있는 중요한 정보를 포함하고 있으며, 이를 이용하여 실질적으로는 존재하지 않는 음원을 근사적으로 생성할 수 있는 입체 음향 시스템을 구현할 수 있다 그러나 개인의 것이 아닌 일반적인 머리전달함수를 사용함으로 인해 앞뒤 판정 오차, 고도 판정 오차와 같은 음상 정위 능력이 저하된다. 이 논문에서는 머리전달함수의 스펙트럼 놋치(notch) 레벌을 증가시켜 수직면상에서의 앞뒤 판정 오차와 고도 판정 오차를 줄였다. 제안된 방법의 성능을 정지된 음원과 움직이는 음원에 대하여 주관 평가를 통해 증명하였다.

• 자원환경지질
• /
• 제29권6호
• /
• pp.739-744
• /
• 1996

Kite는 조사지역을 한번 횡단함으로써 3차원 지하영상을 얻기 위한, 새로이 개발된 단일채널(single-channel) 탄성파 취득시스템이다. Kite시스템은 진행방향에 수직으로 전개되는 하이드로폰(hydrophone)과 하이드로폰의 한쪽 끝에 설치하는 에너지원(source)인 에어건(air-gun)으로 구성된다. 3차원 지하영상은 기존 다중채널 반사자료 처리방법을 사용하며, 공통 소스점 모음(CSS gather)을 딕스식을 이용하여 지하층들의 평균 구간속도를 구하게 된다. 이 구간속도와 정규 고결응력으로 부터 물리상수들을 선택적으로 이용하여 전단계수, 공극율, 횡파속도 등을 구하였다. 본 시스템은 북대서양의 대륙붕에서 실시되었으며 좋은 결과를 얻을 수 있었다.

• 셀메드
• /
• 제9권3호
• /
• pp.2.1-2.7
• /
• 2019

Sesame (Sesamum indicum L.) is a rich source of edible oil most commonly it is used as a food product mainly in bakeries and also use as a common source of oil in daily kitchen needs. Due to the presence of some special phytochemicals like proteins, fibers, oil, minerals and antioxidants it is highly used for medicinal and therapeutic purposes. It is a good source of energy and act as an antiaging agent. Its seeds are used as Anti-helmintic, antihypertensive, antimicrobial, cytotoxic and Hepatoprotective but its seed coat which is a byproduct of sesame and a cherished source of fibers is normally use for animal feedstuff. In Unani system of medicine it is used both as drug & diet (dawa wa ghida). In classical Unani literature it is indicated in various disorders like Asthma, Dry Cough, Gastritis (due to any drug, excessive use of alcohol), Dryness of Intestine, Dryness in throat, Renal Stone, Bleeding Piles, Amenorrhea, Retention of urine, Dysuria, Orchitis, Sexual Debility, Anorexia. The present review article, an attempt have been made to compile all the pharmacological and Pharmacognostical characters of Sesamum indicum with special reference to Unani literature.

• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.48-56
• /
• 2009

본 논문은 연료전지스택을 입력전원으로 하는 TIG-용접기용 전력변환장치를 제안하였다. 일반적으로 TIG-용접기의 전원공급장치는 상용전원을 이용한 다이오드 브리지 정류회로를 사용한다. 이런 회로의 경우 다이오드 정류기와 용량이 큰 캐패시터를 사용하게 되므로 부피가 커지고, 입력전류는 맥동성분과 고조파를 포함하게 된다. 또한, TIG-용접기는 상용전원의 사용이 여의치 않은 도서산간지역이나 특수한 환경에서는 소형 경량의 이동성이 수월한 전원장치 및 전력원을 필요로 하게 된다. 따라서 본 논문의 TIG-용접기용 전력변환장치는 고체고분자형연료전지(PEMFC)를 입력전원으로 사용하고, 부스트 컨버터의 기능과 인버터 용접전원의 기능을 하나의 풀-브리지 컨버터로 구성하였다. 제안한 연료전지를 이용한 TIG-용접기용 전력변환장치는 컴퓨터 시뮬레이션과 실험을 통하여 성능을 검증하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.115-124
• /
• 2002

This paper presents an active auxiliary edge-resonant DC link snubber with a ringing surge damper and a three-phase voltage source type zero voltage soft-switching inverter with the resonat snubber treated here for the AC servo motor driver applications. The operation of the active auxiliary edge-resonant DC link snubber circuit with PWM voltage is described, together with the practical design method to select its circuit parameters. The three-phase voltage source type soft-switching inverter with a single edge-resonant DC link snubber treated here is evaluated and discussed for the small-scale permanent magnet (PM) type-AC servo motor driver from an experimental point of view. In addition to these, the AC motor stator current and its motor speed response for the proposed three-phase soft-switching inverter employing Intelligent Power Module(IPM) based on IGBTS are compared with those of the conventional three-phase hard-switching inverter using IPM. The practical effectiveness of the three-phase soft-switching inverter-fed permanent magnet type AC motor speed tracking servo driver is proven on the basis of the common mode current in a novel type three-phase soft-switching inverter-fed AC motor side and the conductive noise on the mains terminal interface voltage as compared with those of the conventional three-phase hard-switching inverter-fed permanent magnet type AC servo motor driver for the speed tracking applications.

• Journal of Communications and Networks
• /
• 제14권2호
• /
• pp.162-168
• /
• 2012

This paper considers the scenario in which a set of nodes share a common channel. Some nodes have a rechargeable battery and the others are plugged to a reliable power supply and, thus, have no energy limitations. We consider two source-destination pairs and apply the concept of cognitive radio communication in sharing the common channel. Specifically, we give high-priority to the energy-constrained source-destination pair, i.e., primary pair, and low-priority to the pair which is free from such constraint, i.e., secondary pair. In contrast to the traditional notion of cognitive radio, in which the secondary transmitter is required to relinquish the channel as soon as the primary is detected, the secondary transmitter not only utilizes the idle slots of primary pair but also transmits along with the primary transmitter with probability p. This is possible because we consider the general multi-packet reception model. Given the requirement on the primary pair's throughput, the probability p is chosen to maximize the secondary pair's throughput. To this end, we obtain two-dimensional maximum stable throughput region which describes the theoretical limit on rates that we can push into the network while maintaining the queues in the network to be stable. The result is obtained for both cases in which the capacity of the battery at the primary node is infinite and also finite.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1152-1162
• /
• 2011

In this paper, a single-phase DC-AC inverter using two embedded Z-source converters is proposed. The proposed inverter is composed of two embedded Z-source converters with common DC source and output AC load. The output AC voltage of the inverter is obtained by the difference of output capacitor voltages of each converter. The output voltage of each converter take shape of the asymmetrical AC waveform centering zero voltage. Therefore, the proposed inverter can generate the same output voltage despite low VA rating L-C elements, compared to the conventional inverter using high DC voltage with AC ripple. To verify the validity of the proposed system, the PSIM simulation was achieved under the condition of rapid increase of DC source (110[V]${\rightarrow}$150[V]) and R-load (50[${\Omega}$]${\rightarrow}$300[${\Omega}$]). For controlling the voltage of the inverter system, the one-cycle controller was adopted. As results, the proposed inverter output the constant AC voltage (220[V]rms/60[Hz]) for all conditions. Also, the R-L load and nonlinear diode load were adopted for the proposed inverter loads, and we could know that the its output voltage characteristics were as good as the pure R-load. Finally, the RMS and THD of output AC voltage were examined for the different loads, input DC voltages and reference voltage signals.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.57-68
• /
• 2016

In this study, we present the modern hybrid system based power generation for electric vehicle applications. We describe the hybrid structure of modified current source based DC - DC converters used to extract the maximum power from Photovoltaic (PV) and Fuel Cell system. Due to reduced dc-link capacitor requirement and higher reliability, the current source inverters (CSI) better compared to the voltage source based inverter. The novel control strategy includes Distributed Maximum Power Point Tracking (DMPPT) for photovoltaic (PV) and fuel cell power generation system. The proposed DC - DC converters have been analyzed in both buck and boost mode of operation under duty cycle 0.5>d, 0.5<d<1 and 0.5<d for capable electric vehicle applications. The proposed topology benefits include one common DC-AC inverter that interposes the generated power to supply the charge for the sharing of load in a system of hybrid supply with photovoltaic panels and fuel cell PEM. An improved control of Direct Torque and Flux Control (DTFC) based induction motor fed by current source converters for electric vehicle.In order to achieve better performance in terms of speed, power and miles per gallon for the expert, to accepting high regenerative braking current as well as persistent high dynamics driving performance is required. A simulation model for the hybrid power generation system based electric vehicle has been developed by using MATLAB/Simulink. The Direct Torque and Flux Control (DTFC) is planned using Xilinx ISE software tool in addition to a Modelsim 6.3 software tool that is used for simulation purposes. The FPGA based pulse generation is used to control the induction motor for electric vehicle applications. FPGA has been implemented, in order to verify the minimal error between the simulation results of MATLAB/Simulink and experimental results.