• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.860-864
• /
• 2006

Various kinds of digital contents developers are recognizing the importance of interface design, but they have no integrated and arranged interface design principles, so are facing difficulties in applying them. About the interface of web-site which is one field of the digital contents, there came out necessary principles about the interface design to some extent by the active studying activities in and out of the country. However, the researchers are proposing various principles, so it is difficult to apply which design principle in what situation. To this, this study looks into the common design principles while comparing and analyzing the design principles of Donald A. Norman, Jakob Nielson, Jeff Johnson and Manna Sjoberg. Based on this, we suggest 10 interface design principles to improve the functionality and aesthetics of the digital contents.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.683-692
• /
• 2001

In this paper, an integrated network management agent has been proposed and implemented to support different network management protocols, SNMP (Simple Network Management Protocol) for Internet and CMIP (Common Management Information Protocol) for OSI networks. We used MOVI (Managed Object View Interface) concept to integrate the different network management systems. We reviewed three models to design the integrated network management agent and then selected a suitable model among them. The logical structure of an agent, the implementation method and the operation of each module have been shown in this paper. The osimis and ucd-snmp network management system have been used as the reference systems for implementing our system. The integrated network management agent can support the internetworking between Internet and OSI networks in the aspect of network management. Using MOVI concept, if a new management system is introduced, internetworking with this can be achieved by adding the new interface on the view interface of managed object.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.13-20
• /
• 2000

There are many security problems with Electronic Commerce since insecure public networks, especially Internet, are used. Therefore, for implementing secure Electronic Commerce, CAPI(Cryptographic Application Programming Interfaces) is expected to use various form of security applications. The Cryptographic Application Programming Interface supports cryptographic services for each level and various security services. The CSSM API(Common Security Service Management Application Programming Interface) Provides modularity, simplicity, and extensibility in terms of various add-in modules and interfaces in contract to other CAPIs. This paper proposed an applying method of CSSM API having various extensibility and supporting multi-platforms to Electronic Commerce. we describe encryption, digital signature operation of CSSM API's CSP interface and evaluate secureness by matching relation of theratening factors to security services.

• International Journal of Automotive Technology
• /
• v.3 no.4
• /
• pp.157-163
• /
• 2002

It is well recognized that the ultrasonic method is one of the most common and reliable nondestructive testing (NDT) methods for the quantitative estimation of defects in welded structures. However, NDT techniques applying for adhesively bonded joints have not been clearly established yet. In this paper, the detection of interface crack by the ultrasonic method was applied for the measurement of interfacial crack length in the adhesively bonded joints of double-cantilever beam (DCB). An optimal condition of transmission coefficients and experimental accuracy by the ultrasonic method in the adhesively bonded joints have been investigated and discussed. The experimental values are in good agreement with the computed results by boundary element method (BEM) and Ripling's equation.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1049-1052
• /
• 1999

We present a use. interface(UI) simulator for developing a mobile phone. This simulator consists of 3 major modules: Graphic Tool Editor, User Interface Software(UI), and Network Command Processor(NCP). The Graphic Tool Editor can design a virtual mobile terminal. The NCP sends a command to the phone and then receives its status from the phone after completion of the command. We can add or modify lots of features easily to the phone using the UI module. These modules can interact each other by sharing the common area in the memory. By doing so, these modules can exchange their status and data to operate in real-time. We have designed and tested a virtual prototyping phone for the LGP 3200 manufactured by LGIC by using the simulator. Through a series of experiment, we have believed that our virtual prototyping interactive simulator can do shorten its development and testing cycle by applying it in the early design phase.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.102-105
• /
• 1999

AAL type 2 provides for the bandwidth efficient transmission of low bit rate, short and variable packets in delay sensitive application. The service object for these networks ranges from POTS to multimedia conference. In this paper, we present one possible architecture which common part sublayer for new AAL type 2. The proposed CPS function has been achieved with on a FPGA The proposed architecture is faithful to the standardization of ITU-T and ATM-forum recommendation The proposed architecture applies to variable packet length from architecture CODECs for cellular network.. It's maximum process capability is 155Mbps with 256 CIDs. The architecture has sync./async. interface to application block and UTOPIA interface is used for physical layer interface.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to-multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module has a UART interface for HCI and a audio codec for voice. The interface between controller and this module supports common control interface. An FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.97-102
• /
• 2000

It is well recognized that the ultrasonic methods is one of the most common and reliable nondestructive testing(NDT) methods for the quantitative estimation of defects in welded structures. However, NDT techniques applying for adhesively bonded joints have not been clearly established yet. In this paper, the detection of interface crack by the ultrasonic method was applied for the measurement of interfacial crack length in the adhesively bonded joints of double-cantilever beam(DCB). The optimum condition of transmission coefficients in the adhesively bonded joints and it's experimental accuracy by the ultrasonic method have been investigated. The experimental values are in good agreement with the computed results by boundary element method(BEM) and Ripling's equation.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.75-78
• /
• 1995

The boundary element analysis has been attempted for investigating the singular stress at the interface edge of infinitely layered structure. The subdomain technique has been employed and the analysis model has been divided into two subdomains, which are respectively homogeneous elastic zones. The boundary element equation has been formulated using the equilibrium and continuity conditions at the common interface. The numerical results of example problem has been presented.

• Industrial Engineering and Management Systems
• /
• v.8 no.1
• /
• pp.54-65
• /
• 2009

The existence of Internet revolutionized the computer and communications world. With the rising demand for accessing the Internet, the mobile technology has incorporated the use of Internet in mobile phones. Wireless Application Protocol (WAP) has combined two of the widest utilized technology today: mobile phones and Internet. This study aims to assess the existing WAP pages offered by the top service providers in the Philippines through usability testing experiments. The paper also aims to identify existing problems in WAP interface by focusing on the errors committed by the users. From the usability study, it was found out that common usability problems are wrong selection of links, unclear grouping of categories, wrong feedback, and redundant links. The type of service provider used is significant in determining the performance of users while experience in accessing WAP is insignificant.