• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.13-24
• /
• 2007

This study was conducted to confirm if spatial distribution of macrobenthic fauna were related with sedimentary characteristics. Sedimentary characteristics were compared in each community after carrying of community analysis based upon species composition. Macrobenthic animals were distinguished with 4 communities based on the tidal level, of which 3 communities were divided into two groups on the sediment composition. Common species which were presented in all communities, Nephtys californiensis Hartman 1938, Haploscoloplos elongatus Johnson 1901, Glycera sp., Heteromastus sp. Notomastus sp. Timarete amtarctica Mono 1930, Glysinde sp., Lumbrineris japonica Marenzeller 1879 were having different appearance densities at each community area caused by different sedimentary characteristics. But only two species among the common species have a correlation significantly. Temporal variation of common species could not be recognised because of 4 times of seasonal investigation was not enough know their life cycles. So, in the future more frequently sampling method should be required.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.444-447
• /
• 2011

In this paper, parallel IT(inverse transform) architecture and IQ(inverse quantization) architecture with common operation unit for the H.264/AVC decoder are proposed. By using common operation unit, the area cost and computational complexity of IQ are reduced. In order to take four execution cycles to perform IT, the proposed IT architecture has parallel architecture with one horizontal DCT unit and four vertical DCT units. Furthermore, the execution cycles of the proposed architecture is reduced to five cycles by applying two state pipeline architecture. The proposed architecture is implemented to a single chip by using Magnachip 0.18um CMOS technology. The gate count of the proposed architecture is 14.3k at clock frequency of 13MHz and the area of proposed IQ is reduced 39.6% compared with the previous one. The experimental result shows that execution cycle the proposed architecture is about 49.09% higher than that of the previous one.

• Steel and Composite Structures
• /
• v.23 no.5
• /
• pp.501-516
• /
• 2017

Numerical simulations are prevalently used to evaluate the seismic behaviour of structures. The accuracy of the simulation results depends directly on the accuracy of the modelling techniques employed to simulate the behaviour of individual structural members. An empirical modelling technique is employed in this paper to simulate the behaviour of column members under cyclic and seismic loading. Despite the common modelling techniques, this technique is capable of simulating two important aspects of the cyclic and seismic behaviour of columns simultaneously. The proposed fiber-based modelling technique captures explicitly the interaction between the bending moment and the axial force in columns, and the cyclic deterioration of the hysteretic behaviour of these members is implicitly taken into account. The fiber-based model is calibrated based on the cyclic behaviour of square hollow steel sections. The behaviour of several column archetypes is investigated under a dual cyclic loading protocol to develop a benchmark database before the calibration procedure. The dual loading protocol used in this study consists of both axial and lateral loading cycles with varying amplitudes. After the calibration procedure, a regression analysis is conducted to derive an equation for predicting a varying calibrated modelling parameter. Finally, several nonlinear time-history analyses are conducted on a 6-story steel special moment frame in order to investigate how the results of numerical simulations can be affected by employing the intended modelling technique for columns instead of other common modelling techniques.

• Journal of Oral Medicine and Pain
• /
• v.23 no.3
• /
• pp.249-255
• /
• 1998

Mucoceles of the minor salivary glands are the most common cystic lesions affected the oral mucosa. They are believed to be the result of trauma to the salivary duct caused, for example, by biting the lip, cheek, or tongue. Surgical excision has been the most common treatment for these lesions, but occasional recurrences develop after excision because surgical trauma may damage the surrounding minor salivary glands Although various alternative nonsurgical approaches, such as steroid infection, application of gamma-linolenic acid, have also been reported, they are not used routinely, Lasers, particularly the carbon dioxide laser, have been used in the management of mucoceles. Although this treatment requires specialized equipment. Cryotherapy is another effective nonsurgical method for treating mucoceles. Clinically, cryotherapy has primarily been applied to the treatment of leukoplakia and hyperplastic, granulomatous, vascular, and pigmented lesions. Limited information, however, is available on the application of cryotherapy in salivary gland lesions, including mucoceles. A simple and easy cryotherapy to treat a mucocele on the lower lip is described. A 25 years old female patient with a mucocele on the lower lip was treated by direct application of liquid nitrogen with a cotton swab. The lesion was exposed to 4 or 5 cycles composed of freezings of 10-30 s and thawings of double the freezing times. No anesthesia was required. The lesion nearly disappeared without scar 10 days after the cryotherapy. Cryotherapy has become an established nonsurgical method, characterized by its simple application, therapeutic effectiveness, painless during the procedure and low incidence of secondary infection and hemorrhage.

• Journal of Digestive Cancer Research
• /
• v.2 no.1
• /
• pp.32-36
• /
• 2014

We report a patient with combined hepatocellular-cholangiocarcinoma confined in the common hepatic duct and scirrhous type of hepatocellular carcinoma in the caudate lobe of liver simultaneously. The patient was a 55-yearsold Korean man with hepatitis B virus (HBV) carrier who was referred from a local hospital due to detected liver mass on abdominal computed tomography (CT). He has presented jaundice and weight loss for the previous 3 weeks. Laboratory examination showed AST/ALT elevation and hyperbilirubinemia. HBsAg was positive. The tumor marker study showed elevated AFP and DCP, not CEA and CA 19-9. Abdominal CT disclosed an about 2.1×0.9 cm sized soft tissue density in hilum with both intrahepatic duct (IHD) dilatations and an about 3×2.1 cm sized arterial enhancing lesion at segment 8 of the liver. Patient received 15 cycles of Gemcitabine/Cisplantin chemotherapy from February 27, 2013 to December 31, 2013. Caudate lobectomy of liver, segmental resection of bile duct and Roux-en-Y hepaticojejunostomy was performed on February 10, 2014. The final pathologic report showed double primary liver cancer, combined hepatocellular-cholangiocarcinoma in common hepatic bile duct and scirrhous type of hepatocellular carcinoma in segment 1 of the liver. This is a very unusual case in which combined hepatocellular-cholangiocarcinoma confined in the large bile duct and two rare hepatic cancers coexisted.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.393-401
• /
• 1998

Based on clinical observations, it is suspected that the bone-tendon origin is the site where piratical failure, leading to pathophysiological changes in the humeral epicondyle after repetitive loading, is initiated Mechanical properties and failure patterns of the common extensor and flexor tendons of the humeral epicondyle under static and repetitive loading have not been well documented. Our goal was to determine mechanical properties of failure strength and strain changes, to correlate strain changes and the number of cyclic repetitions, and to identify the failure pattern of bone-tendon specimens of common extensor and flexor tendons of the humeral epicondyle. Mechnaical properties of human cadaver bone-tendon specimens of the common extensor and flexor tendons of the humeral epicondyle were tested under two different loading rates. No statistically significant difference in ultimate tensile strength was found between male and female specimens or between slow (10 mm/sec) and fast elongation (100 mm/sec) rates. However, a statistically significant difference in ultimate tensile strength between the common extensor (1190.0 N/$cm^2{\pm}$388.8) and flexor 1922.0 N/$cm^2{\pm}$764.4)tendons was found (p<0.05). When loads of 25%, 33%, and 41% of the ultimate tensile strength of their contralateral sides were applied, the number of cycles required to reach 24% strain change for the common extersor and flexor tendons were approximately 8,893, 1,907, and 410, respectively. The relationship between cycles and loads was correlated ($R^2$=0.46) Histological observation showed that complete or partial failure after tensile or cyclic loadings occurred at the transitional zone, which is the uncalcified fibrocartilage zone between tendon and bone of the humeral epicondyle. Sequential histological sections revealed that failure initiated at the upper, medial aspect of the extensor carpi radialis brevis tendon origin. Biomechanical and hstological data obtained in this study indicated that the uncalcified fibrocartilage zone at the bone-tendon origin of the common extensor and flexor tendons is the weak anatomical structure of the humeral epicondyle.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.257-267
• /
• 2021

Constraints on the structure and composition of the active layer are important for understanding permafrost evolution. Soil convection owing to repeated moisture-induced freeze-thaw cycles within the active layer promotes the formation of self-organized patterned ground. Here we present the results of ground penetrating radar (GPR) surveys across a selected sorted circle near King Sejong Station, Antarctica, to better delineate the active layer and its relation to the observed patterned ground structure. We acquire GPR data in both bistatic mode (common mid-points) for precise velocity constraints and monostatic mode (common-offset) for subsurface imaging. Reflections are derived from the active layer-permafrost boundary, organic layer-weathered soil boundary within the active layer, and frozen rock-fracture-filled ice boundary within the permafrost. The base of the imaged sorted circle possesses a convex-down shape in the central silty zone, which is typical for the pattern associated with convection-like soil motion within the active layer. The boundary between the central fine-silty domain and coarse-grained stone border is effectively identified in a radar amplitude contour at the assumed active layer depth, and is further examined in the frequency spectra of the near- and far-offset traces. The far-offset traces and the traces from the lower frequency components dominant on the far-offset traces would be associated with rapid absorption of higher frequency radiowave due to the voids in gravel-rich zone. The presented correlation strategies for analyzing very shallow, thin-layered GPR reflection data can potentially be applied to the various types of patterned ground, particularly for acquiring time-lapse imaging, when electric resistivity tomography is incorporated into the analysis.

• Journal of Powder Materials
• /
• v.20 no.2
• /
• pp.85-99
• /
• 2013

Powder metallurgy applied rapid heating to sintering starting year 1900. Since 1970 the study has intensified. Now rapid sintering concepts embrace a spectrum of options ranging from dunk cycles to microwave, induction, exothermic, electric field, and spark approaches. Most of the efforts are targeting reduced microstructure coarsening during sintering, although reduced material decomposition is another common goal. The efforts are impressive for simple shapes and success metrics such a small grain size after densification. Several barriers need to be removed prior to application in powder metallurgy commercial sintering. Rapid heating research needs to focus on significant property gains, accurate product dimensions, and lower costs. So far each property gain obtained with rapid heating is matched by traditional sintering and composition changes. Several examples are cited to show the goals for the next round of innovations.

• Architectural research
• /
• v.13 no.2
• /
• pp.3-12
• /
• 2011

Planning information generated during initial architectural design phases significantly influences subsequent phases, and is implemented into architectural design models during the design process. However, failures to manage and use planning information in Korean design offices remain common. Current design tools that incorporate planning information also do not address the issue of interoperability during the life cycles of buildings. To address these problems, the Industry Foundation Classes (IFC) extension model was developed to accommodate the need to manage and use planning information for cooperation between design offices carrying out multidisciplinary tasks. This paper introduces a purpose-built software tool that implements the IFC model and demonstrates the efficiency of the proposed method with the software tool.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.14 no.3
• /
• pp.118-123
• /
• 2006

A few commonly used correlation equations of the enthalpy of vaporization essential to the analysis of refrigeration cycles are reviewed. A new four-parameter correlation equation is proposed assuming that the enthalpy of vaporization could be represented with a linear form of the temperature and an additional function which slowly decreases as the temperature increases. It is not a common practice to measure the enthalpy of vaporization by experiment; therefore, performance of the new correlation is examined using numeric data from the ASHRAE tables for 22 pure substance refrigerants. The new correlation equation and other existing ones are fitted to the data optimizing the root mean squared deviation. All data points are weighted equally and NBP (normal boiling point) is used as a fixed point since the NBP is important for refrigeration application. The new four-parameter equation yields an average absolute deviation of 0.05% for 22 refrigerants which is smaller than those of other four-parameter equations, such as Guermouche-Vergnaud (0.08%), Aerebrot (0.13%), Radoz-Lyderson (0.08%), and Somayajulu four-parameter equation (0.08%).