• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.3
• /
• pp.340-360
• /
• 2005

Fishery resource rents(i.e. windfall gains or excess profit), which tend to lead a variety of important economic, social, political problems, have been a fundamental cause of unbalance between fishery resource use and management. Thus, there may exist several sorts of optimal level of resource utilization such as economic maximum sustainable yield, biological maximum sustainable yield, social optimum production, socio-political optimum yield, etc. The fishery resource use level seems to a large extent to be determined by the characteristics of fishermen's rent seeking structure. As well known, fishery resources as common properties have a characteristic of being difficult to establish private property rights. Therefore, their use rights are controlled by the permit and/or the license system. As a result, absolute or differential rents are formed by the changes in institutional arrangements. Rent problems are often transformed into serious socio-political issues when the rent in a given industry is much higher to a socially unacceptable extent than the average of other industries. However, individual fishermen or fishermen's groups tend to behave aggressively to change the existing fishery institutions towards maximizing fishery rents. These rent-seeking behaviors often tend to nullify fishery management schemes. The larger is the relative rent difference between fisheries and other industries, the more aggressive tend to be the rent-seeking behaviors in fisheries.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.27 no.4
• /
• pp.101-109
• /
• 2014

Objective : The purpose of this study is to summarize the differential diagnosis between allergic and nonallergic rhinitis and suggest management. Methods : We reviewed the current update of medical history and physical examination for allergic and nonallergic rhinitis. Then we analyzed clinical characteristics according to onset age, gender incidence and state of nasal symptoms, etc. Results : 1. Patients with nonallergic rhinitis tend to develop symptoms at a later age(>35 years of age), and there is a female-to-male incidence ratio for nonallergic rhinitis of 2:1 to 3:1. 2. Patients with nonallergic rhinitis report nasal congestion, nasal rhinorrhea and more often report postnasal drip rather than sneezing and itching, which are predominant symptoms of allergic rhinitis. And the nasal mucosa in nonallergic rhinitis usually looks normal. 3. Patients with nonallergic rhinitis have few complaints of concomitant symptoms of allergic symptoms and the absence of other atopic diseases in the patient or in the family supports the diagnosis of nonallergic rhinitis. 4. Common triggers of nonallergic rhinitis are nonspecific irritant exposures and many patients with nonallergic rhinitis find that antihistamines have no benefit. Conclusions : The differential diagnosis between allergic and nonallergic rhinitis is clinical and relies on a detailed medical history and physical examination.

• Geomechanics and Engineering
• /
• v.16 no.4
• /
• pp.449-461
• /
• 2018

The load sharing ratio (${\alpha}_{pr}$) of piles is one of the most common problems in the preliminary design of piled raft foundations. A series of 3D numerical analysis are conducted so that special attentions are given to load sharing characteristics under varying conditions, such as pile configuration, pile diameter, pile length, raft thickness, and settlement level. Based on the 3D FE analysis, influencing factors on load sharing behavior of piled raft are investigated. As a result, it is shown that the load sharing ratio of piled raft decreases with increasing settlement level. The load sharing ratio is not only highly dependent on the system geometries of the foundation but also on the settlement level. Based on the results of parametric studies, the load sharing ratio is proposed as a function of the various influencing factors. In addition, the parametric analyses suggest that the load sharing ratios to minimize the differential settlement of piled raft are ranging from 15 to 48% for friction pile and from 15 to 54% for end-bearing pile. The recommendations can provide a basis for an optimum design that would be applicable to piled rafts taking into account the load sharing characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.885-894
• /
• 2015

In this paper, it can be applied to a walkie-talkie, the RFID / USN 920 MHz band(917~923.5 MHz) and WiFi 2.4GHz band(2.4~2.483 5GHz) return loss is 10 dB over the band, on-board dual band with omni-directional radiation characteristics is proposed. The basic structure designed antenna is used meander monopole antenna. It was used as double stubs and tabs for antenna designs that meet the criteria proposed. The double stub and the tab affects the reactance of the antenna to form a common-mode and differential-mode in the stub to improve the antenna characteristics and return loss in the bandwidth, gain and radiation characteristics. The system size of walkie-talkie is $52{\times}77mm^2$, the size of the antenna is limited to $52{\times}15mm^2$, the thickness of FR4 dielectric substrate is 0.8 mm, FR4 dielectric constant 4.4 is used. For experimental results, the return loss is measured more than 10 dB, the maximum gain is measured 1.95 dB, the maximum bandwidth is measured 360 MHz, the radiation characteristic is measured omni-directional. By a walkie-talkie terminal design applying the results of the paper, the handset's price competitiveness and production efficiency can be improved.

• Korean Journal of Veterinary Service
• /
• v.31 no.4
• /
• pp.485-492
• /
• 2008

Salmonella enterica serovars Gallinarum(SG, causative agent of fowl typhoid) and S Pullorum(SP, causative agent of pullorum disease) are very important bacterial pathogens in poultry industry. They share some common antigenic properties though the characteristics of outbreaks are quite different. To discriminate between SG and SP, we developed two rapid diagnostic methods, allele-specific real-time PCR and 3'-tailed PCR over 2 single nucleotide polymorphisms ($237^{th}\;and\;598^{th}$). In both methods, $237^{th}$ allele was found to be a good target for differential diagnosis, while $598^{th}$ allele produced some non-specific reactions.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.632-642
• /
• 2012

This paper presents a filter analysis of conducted Electro-Magnetic Interference (EMI) in switching power converters (SPC) based on noise impedances. The EMI characteristics of SPC can be analytically deduced from a circuit theoretical viewpoint. The analytical noise model is investigated to get a full understanding of the EMI mechanism. It is shown that with suitable and justified model, filters pertinent to EMI noise is investigated. The EMI noise is identified by time domain measurements associated with an isolated half-bridge ac-dc converter. Practical filters like LC filter, ${\pi}$ filter and complete EMI filters are investigated. The proposed analysis and results can provide a guideline for improving the effectiveness of filtering schemes in SPC. Experimental results are also included to verify the validity of the proposed method. The results obtained satisfy the Federal Communications Commission (FCC) class A and class B regulations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.89-98
• /
• 2006

This paper describes signal attenuation characteristics as splicing the output on LVDT for stability and reliability of switching mechanism, which is developed to use common signal between FLCC and EDFLCC, on T-50 aircraft. The method of test is classified a Pspice simulation and an actual hardware evaluation. The difference of error margin for two methods is 10times, the latter higher. The result in this experiment shows that the signal attenuation as splicing the output on LVDT doesn't affect and the static error margin is 53% for develope the EDFLCC.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.392-400
• /
• 2001

The sealing performance of an elastomeric O-ring seal using bi-materials has been analyzed for the contact stress behaviors that develop between the O-ring seal and the surfaces with which it comes into contact. The leakage of an O-ring seal will occur when the pressure differential across the seal just exceeds the initial (or static) peak contact stress. The contact stress behaviors that develop in compressed O-rings, in common case of restrained geometry(grooved), are investigated using the finite element method. The analysis includes material hyperelasticity and axisymmetry. The computed FEM results show that the contact stress behaviors are related to a ratio of length between NBR and FFKM and temperature of vaccum chamber.

• Journal of electromagnetic engineering and science
• /
• v.8 no.3
• /
• pp.91-95
• /
• 2008

This paper presents a direct-conversion I/Q up-mixer block, which supports $3{\sim}5$ GHz ultra-wideband(UWB) applications. It consists of a VI converter, a double-balanced mixer, a RF amplifier, and a differential-to-single signal converter. To achieve wideband characteristics over $3{\sim}5$ GHz frequency range, the double-balanced mixer adopts a shunt-peaking load. The proposed RF amplifier can suppress unwanted common-mode input signals with high linearity. The proposed direct-conversion I/Q up-mixer block is implemented using $0.18-{\mu}m$ CMOS technology. The measured results for three channels show a power gain of $-2{\sim}-9$ dB with a gain flatness of 1dB, a maximum output power level of $-7{\sim}-14.5$ dBm, and a output return loss of more than - 8.8 dB. The current consumption of the fabricated chip is 25.2 mA from a 1.8 V power supply.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.525-528
• /
• 2002

The proposed EMC filter composed with feed-through capacitors and ferrite beads of high permeability was prepared which satisfy the EMC standard for a wide-band noise signal in the frequence of 10 MHz to 1.5 GHz in power supply line. The optimum structure of ferrite bead was found by calculating the load effect of ferrite beads. As a result, the filter showed excellent differential- and common-mode noises filtering characteristics above 30dB in the frequency band from 10 MHz to 1.5 GHz. The immunity characteristics are improved more than 10 to 30 dB over the frequency band from DC to 1.8GHz.