• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.205-211
• /
• 2003

Acoustic emission (AE) technique has been applied to not only mechanical property testing but also on-line monitoring of the el)tire structure or a limit zone only. Although several AE devices have already been developed for the on-line monitoring, the price of these systems is very high and it is difficult for the field to apply yet. In this study, wc developed a specially designed PC-based source location system using the A/D board. The source location technique is very important to identify the source, such as crack, leak detection. However, since the AE waveforms obtained from transducers are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analyses of the transient waveform. Wavelet Transform (WT) is a powerful tool for processing transient signals with temporally varying spectra that helps to resolve high and low frequency transients components effectively In this study, the analyses of the AE signals are presented by employing the WT analyses. AE results are compared the PC-based source location system using A/D board with the commercial AE system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.195-202
• /
• 2017

Ortho images created by aerial photogrammetry have been used in large areas but they are uneconomical for small areas and continuous change observation. The drones have been developed for military purposes, and recently they are being used crop management and analysis, broadcast relay, meteorological observation and disaster investigation and so on. Also there were a lot of studies of expensive commercial drone. In this paper, lower price self-assembly drone usable for in small areas, Obtained images and produced Orthomosaic and DSM using mission planner which is a normal digital camera and open source program, and postprocessing was used Pix4d software. GCP errors are X-coordinate 3.4cm, Y-coordinate 2.4cm, Z-coordinate 4.2cm. It seems like the self-assembly drone can be used for various fields.

• Clean Technology
• /
• v.24 no.4
• /
• pp.357-364
• /
• 2018

Studies on the production of biogas from third generation biomass, such as micro- and macroalgae, have been conducted through experiments of various scales. In this paper, we investigated the feasibility of commercialization of integrated combined heat and power (CHP) production using biogas derived from macroalgae, i.e., seaweed biomass. For this purpose, an integrated CHP plant of industrial scale, consisting of solid oxide fuel cells, gas turbine and organic Rankine cycle, was designed and simulated using a commercial process simulator. The cost of each equipment in the plant was estimated through the calculated heat and mass balances from simulation and then the techno-economic analysis was performed. The designed integrated CHP process produces 68.4 MW of power using $36ton\;h^{-1}$ of biogas from $62.5ton\;h^{-1}$ (dry basis) of brown algae. Based on these results, various scenarios were evaluated economically and the levelized electricity cost (LEC) was calculated. When the lifetime of SOFC is 5 years and its stack price is $$225kW^{-1}$, the LEC was 12.26 ¢ $kWh^{-1}$, which is comparable to the conventional fixed power generation.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.624-634
• /
• 2018

Indonesia has become a net crude oil importer because of the reduction of a new oil field discovery, and Indonesia is attempting to raise investment funds through the Kerja Sama Operasi (KSO) contract to develop a small-scale field. However, the KSO has a high-risk and low-return contract system for investors, necessitating an economic evaluation to examine the feasibility of the project. This study performed economic evaluation on the development of an Indonesian small-scale field by applying the KSO contract conditions, and identified the major economic parameters through a sensitivity analysis. As a result, the oil price, CAPEX and OPEX were identified as influential factors for economic evaluation. The results also indicate that commercial production in small-scale fields is difficult. In the future, this study can be used as a reference resource for investment in oil and gas development projects in Indonesia.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.33-40
• /
• 2019

As aerospace industry has been activated recently, it is required to commercialize composite analysis software. Until now, commercial software has been mainly used for analyzing composites, but it has been difficult to use due to high price and limited functions. In order to solve this problem, automatic analysis software for both in-plane and corner radius strength, which are all made on-line and generalized, has recently been developed. However, these have the disadvantage that they can not be analyzed simultaneously with multiple failure criteria. In this paper, we propose a method to greatly improve the processing speed while simultaneously handling the analysis of multiple failure criteria using a parallel processing platform that only works with a GPU equipped with a CUDA core. We have obtained satisfactory results when the analysis speed is experimented on the vast structure data.

• Tribology and Lubricants
• /
• v.38 no.1
• /
• pp.27-31
• /
• 2022

Harmonic drives have attracted increasing attention with the development of materials, parts, and related equipment. Harmonic drives exhibit high deceleration, high accuracy, and light weight. The stiffness of flexible splines according to the radial load is studied using a commercial FEM program to design the structure of the flexible spline and finite element to improve the weight and price competitiveness of harmonic drives. In addition, several studies have measured and compared friction coefficients based on 3D printed tread patterns. However, owing to the characteristics of plastic materials, a decrease in stiffness in the radial direction is inevitable. To prevent a decrease in stiffness in the radial direction, we designed and manufactured flex splines with a wrinkle shape. Through structural analysis, the reaction force and stiffness in the radial direction were determined. In addition, the maximum angle of the mound was derived by theoretical calculations, and the performance of the harmonic drive was compared with the results obtained in the mound experiment. Structural analysis shows that the shape of wrinkles decreased the stress and reaction force and increased the safety factor in comparison with that of the circular shape. During performance verification through continuous experiments, the developed harmonic drive showed continuous performance similar to that of an actual tank model. It is expected that the flex spline with a compliant spring and wrinkle shape will prevent a decrease in the radial stiffness.

• Journal of the Korean Dietetic Association
• /
• v.28 no.4
• /
• pp.267-280
• /
• 2022

The purpose of this study was to investigate the consumption status and perception of soy meat among university students and to compare their sensory evaluations of commercial meatballs and soy meatballs. The subjects were students at a university who were grouped into those majoring in food and nutrition and those not majoring in the subject. The results of the two groups were compared. The main sources through which the students became aware of meat analogs were examined. The food and nutrition major students were about three times more likely to learn about meat analogs through 'education', and those not majoring in the subject were about four times more likely to learn about them from the social media (P<0.01). The most common reason for having tried soy meat was 'curiosity' and that for not eating it was 'no opportunity'. Without significant differences between groups, the most common answer for questions relating to the product that they had eaten was 'Ramen flakes' (30.5%) and the most common answer for the routes for eating the product was in the order of: 'restaurants' (36.6%)>school lunches (24.9%)>large and medium-sized supermarkets (22.8%). The most common answer to the question inviting suggestions on 'improvement points to promote the consumption of soy meat' was 'taste'(19.2%), followed by 'product promotion' and 'reasonable price'. About half of the subjects failed to differentiate the soy meatballs from regular meatballs before the sensory test and 21.3% after that. The difference in the sensory test scores of the two types of meatballs with respect to 'texture' was significantly higher for the major students than for the non-major students (P<0.05). These results could provide basic information that could enable the promotion of soy meat.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1009-1020
• /
• 1996

Direct-seeded rice can have comparable yield with transplanted rice if its inherent problems can be solved. It is a labor-saving technology and can significantly reduce production cost because seedling nursery , pulling , and transplanting are omitted. Turnaround time between cropping is reduced hence the possibility of a third annual crop. But direct-seeded rice is very vulnerable to pest attack (by birds, rats, and golden snails), desiccation, weed infestation, and prone to lodging resulting to unstable crop establishment and inconsistent yield. These problems can be solved by anaerobic seeding (sowing pre-germinated seeds under the soil). It requires precise seed placement into the soil to optimize its benefits. We developed a four-row anaerobic direct seeder (US $ 200 commercial price) for this purpose . It consist of a structural framework mounted with a drum -hopper metering device, flotation type drivewheels, spring-loaded and adjustable furrow closers, and furrow open rs, and a plastic rainguard. It can sow in line pre-germinated seeds into the soil thus permitting the use of mechanical weeders for a chemical-free weed control. Its performance was comparable with the Japanese two-row anaerobic seeder (costing US$400) in terms of seed placement and crop establishment. It was tested with five cultivars. Seeding rate varied from 38 kg/ha to 80kg/ha. Crop establishment ranged from 64 to 99 percent while grain yield varied from 3.0 t/ha to 5.4t/ha. A six-row anaerobic seeder was also developed and adapted to a powertiller for increased capacity , field efficiency , and easier operation. The anaerobic seeder is useful to farmers shifting to direct seeding to reduce rice production cost and to researchers conducting agronomic studies in direct-seeded rice. Blueprint of the machine is available free of charge from IRRI.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.272-275
• /
• 2009

Carbon finance is the investment in Greenhouse Gas (GHG) emission reduction projects in developing countries and countries with economies in transition within the framework of the Kyoto Protocol's Clean Development Mechanism (CDM) or Joint Implementation (JI) and with creation of financial instruments, i.e., carbon credits, which are tradable in carbon market. The additional revenue generated from carbon credits will increase the bankability of projects by reducing the risks of commercial lending or grant finance. Meantime, it has also demonstrated numerous opportunities for collaborating across sectors, and has served as a catalyst in bringing climate issues to bear in projects relating to rural electrification, renewable energy, energy efficiency, urban infrastructure, waste management, pollution abatement, forestry, and water resource management. Establishing additionality is essential for successful CDM project development. One of the key steps is the investment analysis. As guided by UNFCCC, financial indicators such as IRR, NPV, DSCR etc are most commonly used in both Option II & Option III. However, economic indicator such as Economic Internal Rate of Return(EIRR) are often overlooked in Option III even it might be more suitable for the project. This could be due to the difficulties in economic analysis. Although Asian Development Bank(ADB) has given guidelines in evaluating EIRR, there are still large amount of works have to be carried out in estimating the economic, financial, social and environmental benefits in the host country. This paper will present a case study of a CDM development of a 18 MW hydro power plant with carbon finance option in central Vietnam. The estimation of respective factors in EIRR, such as Willingness to Pay(WTP), shadow price etc, will be addressed with the adjustment to Vietnam local provincial factors. The significance of carbon finance to Vietnam renewable energy development will also be addressed.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.975-985
• /
• 2021

The sufficient amount of protein supply is crucial for improving the growth performance of growing beef cattle. In addition, due to the improvement in the genetic potential of the carcass weight of Hanwoo steers, dietary protein requirements may be increased during the rapid growth period. Accordingly, the dietary crude protein (CP) level in growing Hanwoo steers has been increasing in the field. However, little scientific evidence is available in relation to this. Therefore, this study was conducted to test whether a higher dietary CP level than convention would improve the growth performance and body metabolism in growing Hanwoo steers. Fifty growing Hanwoo steers were randomly divided into two groups and fed either a commercial diet (CON) or a higher CP (HCP) concentrate mix, provided with a similar level of dietary energy. Tall fescue hay was provided ad libitum. The dietary CP level did not affect growth performance and blood metabolite. Nitrogen intake, predicted nitrogen excretion, and retained nitrogen were higher in the HCP group than in the CON group (p < 0.01). Although there was no difference in the nitrogen utilization efficiency, the growth efficiency per retained nitrogen decreased in the HCP group (p = 0.02). A higher dietary CP level may increase nitrogen retention in growing Hanwoo steers without improving growth performance, which leads to reduced growth efficiency per retained nitrogen. Furthermore, considering the high price of feed protein and increased nitrogen excretion to the environment, a further increase in the protein level may not be sustainable.