• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.381-390
• /
• 2017

In Korea, commercial nuclear power plants and research reactors have on-site storage systems for the spent nuclear fuel, but it is difficult to expand the facilities used for the storage systems. If decommissioning of nuclear power plants starts, an amount of high level radioactive waste will be generated. In this study, a radiological impact assessment of the railroad transport of high level radioactive waste was carried out considering radiation workers and the public, using the developed transport container as the transport package. The dose rates for workers and the public during the transport period were estimated, considering anticipated transport scenarios, and the results compared with the regulatory limit. A sensitivity analysis was also carried out by considering the different release ratios of the radioactive materials in the high level radioactive waste, and different distances between the transport container and workers during loading and unloading phases and while attaching another freight car. For all the anticipated transport scenarios, the radiological impacts for workers and the public met the regulatory limits.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.22-28
• /
• 2007

Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1415-1422
• /
• 2014

Hot water extraction concentrate was prepared from Alliun hookeri root (AHR) to evaluate its applicability to yogurt. The highest antioxidant activity of hot water concentrates was obtained under extraction conditions of 4 hr at $95^{\circ}C$. Antioxidant activities measured by DPPH radical assay, ABTS radical cation assay, reducing power, and cheating activity were highly correlated with total phenolic (89.51 mg/g) and total flavonoid (52.71 mg/g) contents, with R values of 0.94 and 0.96, respectively. Yogurt was fermented with a commercial lactic acid bacteria mixed strain (Yo-mix$^{TM}$ 305) for 10 hr at $42^{\circ}C$ after addition of 0~10% (w/w) hot water concentrates from AHR to yogurt base. As fermentation proceeded, pH and $^{\circ}Brix$ of yogurt decreased from 6.57~6.60 to 4.34~4.51 and from 8.10~8.90% to 4.60~5.25%, respectively, whereas titrate acidity, viscosity, and viable cell numbers increased from 0.22~0.23% to 1.01~1.10%, from $0mPa{\cdot}s$ to $202.55{\sim}290.50mPa{\cdot}s$, and from 6.40~6.80 log CFU/mL to 8.60~9.20 log CFU/mL, respectively. There was no significant difference in any sensory attribute between the control and 2.5% addition group, suggesting that 2.5% hot water concentrate from AHR could be used to manufacture yogurt.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.120-125
• /
• 2002

AC powder EL devices were fabricated by screen printing method with the dielectric materials in insulating layer and the electrical resistivity of rear electrode. Brightness and current density were measured at voltage range of 50∼300 $V_{rms}$ to estimate optoelectrical properties of AC powder EL devices, respectively. Frequency generator was used as system producing frequency and voltage of a sine wave. Brightness and current density were measured by luminometer and multimeter. Also, dielectric constant for dielectric layer was measured by impedance analyser after preparing thick film. Dielectric constant was improved with amount of $TiO_2$ to $BaTiO_3$ powder. By applying such a process to dielectric layer of low cost AC powder EL device, brightness was improved to 50 cd/$m^2$ at similar current density. Dielectric constant $BaTiO_3$ powder by solution combustion process is better than commercial $BaTiO_3$ powder. By applying to that of low power consumption AC powder EL device, brightness was improved to 85 cd/$m^2$. Brightness of AC powder EL device was relatively decreased by control of electrical resistivity of rear electrode, current density was also decreased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1253-1257
• /
• 2009

The effects of seven commercial gums (xanthan gum, guar gum, pectin, gum arabic, gellan, locust bean gum, and sodium alginate) at different concentrations (0, 0.3, and 0.6%) on flow properties of sweet potato starch (SPS) pastes were investigated. Flow behavior characteristics were adequately described by power law flow model, and yield stress was also measured by vane method. SPS-gum mixtures (5% w/w) at $25^{\circ}C$ were found to have high shear-thinning flow behavior with yield stress, and their consistency index (K) and apparent viscosity ($\eta_{a,100}$) increased with elevated gum concentration, except for pectin and sodium alginate. Vane yield stress ($\sigma_o$) value of SPS-pectin mixture was lower when compared to other mixtures while that of SPS-gellan mixture was much higher. Most of the gums, except for pectin, gum arabic, and sodium alginate, showed a synergistic effect on the elastic properties of SPS-gum mixtures. In general, the flow properties of SPS-gum mixtures appeared to be strongly influenced by the addition of gum, and dependent on the type and concentration of gum.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.256-262
• /
• 2014

Cycle length of domestic nuclear power plants is determined by the demand-supply plan of utility company. The target cycle length is achieved by adjusting the number of feed fuel assembly and fuel enrichment. Traditionally, utility company first select the number of feed fuel assembly and then find out the fuel enrichment to achieve the special cycle length. But it is difficult to find out if this method is most economical than any other combinations of the enrichment and batch size satisfying the same cycle length. In this paper, core depletion calculation is performed to find out the optimum combination of the enrichment and batch size for given target cycle length in terms of fuel cycle cost using commercial core design code; CASMO/MASTER code. To minimize the uncertainty resulting from transition core analysis, levelized fuel cycle cost analysis was applied to the equilibrium cycle core in order to determine the optimum combination. The sensitivity study of discount rate was also carried out to analyze the levelized fuel cycle cost applicable to countries with different discount rates. From the levelized fuel cycle cost analysis results, the combination with smaller batch size and higher fuel enrichment becomes more economical as the discount rate becomes lower. On the other hand, the combination with higher batch size and lower fuel enrichment becomes more economical as the discount rate becomes higher.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.617-624
• /
• 2015

This paper describes the development of a wearable robot to assist the elbow muscle for use by elderly workers in aging societies. Various previously developed wearable robots have drawbacks in terms of their price, portability, and slow recognition of the wearer's intention. In this paper, emphasis is placed on the following features to minimize these drawbacks. The first feature is that an actuator is attached only at the elbow joint that withstands the highest moment during arm motion to reduce the weight, volume, and price of the robot and increase its practicality. The second is that operation of the wearable robot is divided into two modes, a tracking mode and a muscle strengthening mode, and the robot can automatically switch between these modes by analyzing the wearer's intention through the brachial muscle strength measuring device developed in this study. The assistive performance of the developed wearable robot is experimentally verified by motion tracking experiments without an external load and muscle strengthening experiments with an external load. During the muscle strengthening experiments, the power of the muscle of the upper arm is measured by a commercial electromyography (EMG) sensor. Motion tracking performance at a speed of $120^{\circ}/s$ and muscle assistance of over 60 % were obtained using our robot.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.410-421
• /
• 2015

The purpose of this study is to review the contents of the legislation(2015.5.12.) for shop key money concretely and to find an effective way in making an improvement of practical protection in the process of tenant's shop key money collection. From this point of view, this study tries to make some legislative suggestions as follows. First of all, the code of conflicting definition between 'shop key money' and 'shop key money contract' in the amended Commercial Building Lease Protection Act need to be harmonized with each other because they are likely to face potential problems in the protection of tenant's shop key money collction as well as risks for confusion. In the second place, it requires to strengthen the protection of tenant's shop key money collection by approval of direct opposing power of shop key money itself on condition that it satisfies a certain prerequisites. In addition, the ambiguous codes related to the landlord's disturbance should be distinctly arranged and the distribution principle of demonstration about landlord's disturbance on tenant's shop key money collection also should be made clear. Finally, the standard level of shop key money by region, business district, and category of business should be set and announced by Ministry of Land and Transport.

• Journal of Radiation Protection and Research
• /
• v.30 no.3
• /
• pp.121-130
• /
• 2005

Geographical Information System(GIS) was established to display the calculation results which show the concentration change with time and regions in case of an accidental release of radionuclides from Kori Nuclear Power Plants. GIS included the commercial program, ArcView(ESRI), and a basic digital map of 1:5000 scale lot 20km by 20km around Kori area. The object for the presentation was $^{131}I$ concentration in rice which is one of staple foodstuffs. Provided by deposited $^{131}I$ concentrations, ECOREA-II code computed the $^{131}I$ concentration of the soil and the plant in the area divided by In unit cells in total, in which the concentrations also varied with time. The results were introduced into the attributed data of previously designed polygon cells in ArcView. In order to display the concentration change with time by monotonic color, the RGB value for ArcView color lamp was controlled. This display definitely helped the concentration change around Kori area be acceptable to public.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.115-125
• /
• 2010

A theme park is not just a recreational space for leisure activities, but also a place of storytelling as collected around abstract boundaries called themes. These stories are 'a space that tells the meaning' that the visitor is looking for and the Robot Land space offers robots, humans, and nature. This study is a description of the design strategy and content of the work which was elected as a subject of the subsequent rank negotiation of the Masan Robot Land design contest for the selection of a private contractor. The focus of the plan is, first, the organizational power of each space and the delivery power of a theme for the history of revisits, which might be considered depending on whether or not the theme park has been successful in the visitor's mind. Second, it is to actively use the potential of Masan, which is not only the key hub of the mechanical industry but also has beautiful coastal resources. First, they created a space that can flexibly react depending on the user's desire and the change of form, minimizing environmental damage by using a linear metabolism that can provide an amalgam of the elemental characteristics of robots, humans, and nature as motifs. They introduced a planting plan for the admissions square, an existing forest, slope, vacation spot, the inside of a complex, and Eco Island, etc. by utilizing symbolic meaning and adjusting to the spatial characteristics of each space. In addition, they sought a detailed space by setting up zones tailored to the use and character of the subject area, having exhibitions and education about robots, vacation facilities for lodgers, various recreational and commercial facilities, and space for utopian gardens as themes. They planned Masan Robot Land to be a true cultural space that creates mental richness on the basis of not only the economical effects but also local emotion.