• 한국유체기계학회 논문집
• /
• 제4권2호
• /
• pp.7-14
• /
• 2001

Design and development of a propeller fan for a cooling tower have been accomplished by both numerical prediction of performance and experimental validation with a wind tunnel. Main interest lies on blade geometry of a fan for optimal design of aerodynamic performance. A commercial program, Fine/Turbo used for the present numerical estimation, gives us engineering information such as flow details near the blades and flow rate of the system. The numerical results are compared with precise experimental output and show good agreement in comparison between the two data. Also new proposed model of a blade shows improved performance relative to present running model in market.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.47-53
• /
• 1997

The importance of intake system can not be overstressed in the recent heavy duty commercial vehicle design. The basic requirements of intake system are to have less flow resistance and better air cleaning performance which have direct effects on the performance and service life of engine. In order to improve the performance of engine intake system, the flow phenomena in the intake system should be fully understood. With readily availble CFD code, the numerical analysis becomes the more reliable tools for flow optimization in recent design work. In this research, flow field in the intake system was analyzed by STAR-CD, the 3-D computational fluid dynamics code. Especially, the flow inside of air cleaner was thoroughly analyzed. Pressure distribution and velocity profile in the air cleaner and intake duct was obtained. Having the dust seperated from incoming air at the expense of less pressure drop is the ultimate goal for the research.

• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.115-120
• /
• 2007

The adhesive performance of marine mussel extract was compared with that of the commercial medical adhesives for fastening biotissue (SIS) bandages. Joints bonded with mussel extract showed stronger strength than those bonded with other commercial adhesives. The bonding strength was much improved when the moisture in the Joint was reduced using superporous hydrogel regardless of curing time under humid condition ($37^{\circ}C$ and 91% relative humidity). Water inflow into the SIS joint seemed to degrade the performance of mussel extracts adhesive especially for the joints of short period of curing time. The strength of SIS joints coated with surgical sealant was well maintained after being exposed to water inflow.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.737-746
• /
• 2007

A spacer grid, which is one of the most important structural components in a PWR fuel assembly, supports its fuel rods laterally and vertically. Based on in-house design experience, scrutiny of the design features of advanced nuclear fuels and the patents of other spacer grids, KAERI has devised its own spacer grid shapes and acquired patents. In this study, a performance evaluation of KAERI's spacer grid shapes was carried out from mechanical/structural and thermohydraulic view points. A comparative performance evaluation of commercial spacer grid shapes was also carried out. The comparisons addressed the spring characteristics, fuel rod vibration characteristics, fretting wear resistance, impact strength characteristics, CHF enhancement, and the pressure drop level of the spacer grid shapes. The results show that the performances of KAERI's spacer grid shapes are as good as or better than those of the commercial spacer grid shapes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2564-2566
• /
• 2000

HILS(Hardware In-the-Loop Simulation) is an effective tool for design, performance evaluation and test of developed vehicle subsystems such as ABS(Antilock Brake System), suspension, and steering systems. This paper describes a HILS model for an ABS/ASR application. Also the implementation of HILS system for performance test of the ABS ECU(Electronic Control Unit) for commercial vehicles is presented.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.33-40
• /
• 2000

The effectiveness of silica-based microgels prepared through the reaction of sulfuric acid and sodium silicate as a component of Compozil system has been evaluated . Silica based microgels with better performance in retention and drainage than a commercial colloidal silica sol have been successfully prepared. Silica gels with the highest charge density were obtained when product pH was controlled to 9. And highly charged silica-based microgels showed greater retention and freeness performance than a commerical product. In particular the difference in retention, turbidity , and freeness between these microgels and a commercial product was eminent at low addition rate. The effects of reaction conditions including reaction temperature, process water quality and feeing rate on product efficiency in improving retention and drainage were also investigated and discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권1호
• /
• pp.96-100
• /
• 2001

Three commercial strains bred in the US (Hubbard), Holland (Lohman), and Canada (Shaver) and Balady breed of chickens were orally infected with $10^6$ cfu of Salmonella gallinarum per chick. Chicks were compared for weight gain, feed intake, feed conversion ratio, mortality rate and contamination of the liver, spleen and intestine with Salmonella gallinarum on the day of slaughter. The Balady chicks had significantly the lowest mortality rate (p<0.01) and weight gain (p<0.001) and poorest feed conversion ratio (p<0.001). Salmonella gallinarum could be shed from the liver, spleen and intestine with alternative rates in all strains. Lohman was the most resistance over the other two commercial strains, while Hubbard had the highest susceptibility. The Balady chicks were the most resistance. However, they may serve as a possible reservoir of Salmonella gallinarum and it may play a role of spreading the infection to the commercial farms in Jordan.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.517-520
• /
• 2003

Commercial video scope use CCD sensor and frame grabber for image capture and A/D interface but application limited by input resolution and high cost. In this paper we introduce portable video scope using CMOS sensor, USB pen and tuner card (low frame grabber) in place of commercial CCD sensor and frame grabber. Our video scope serves as an essential link between advancing commercial technology and research, providing cost effective solutions for educational, engineering and medical applications across an entire spectrum of needs. The software implementation is done using Direct Show in second version after initial trials using First version VFW (video for window), which gave very low frame rate. Our video scope operates on windows 98, ME, XP, 2000. The drawback of our video scope is crossover problem in output images caused due to interpolation, which has to be rectified for more efficient performance.

• 한국유기농업학회지
• /
• 제13권1호
• /
• pp.113-122
• /
• 2005

for 50% of Rash water every week during experimental period. Eight of 100L of aquarium, eight kg of mudfish and four of female korean native chicken were used this study. This study are divided according to the mudfish fed on commercial mudfish diet in the four of control group and fed on raw hens excreta in the four treatment group. The chemical composition was compared with commercial mudfish diet and hens excreta. In the both sample, crude protein contents was almost same. The crude fat and crude ash were higher in hens excreta than commercial mudfish diet. The growth performance of mudfish tend to high when fed hens excreta. There were no differences in contents of E. Coli and Salmonella and pH of water in aquariums between the groups. Mortality of mudfish tend to decrease when fed hens excreta. No problem with mudfish health was observed during the experimental period of 35 days. These results indicated that it is possible to raising mudfish fed on hens excreta only.

• 항공우주시스템공학회지
• /
• 제4권4호
• /
• pp.44-48
• /
• 2010

This paper is used the commercial magneto-rheological(MR) damper for landing gear. The damping characteristics of Commercial MR damper by changing the intensity of the magnetic field are investigated and the dynamic responses of the landing gear. it is set up tset equipment, the landing gear drop test system. The landing gear involved drop testing the gear. The landing gear is tested by implementing sky-hook control algorithm and its performance is evaluated comparing to the result.