• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.50-56
• /
• 2005

This paper is described a development of an optical fiber displacement sensor. The optical fiber sensor using an intensity modulated measures the displacement between target and sensor. A prototype sensor is composed of a transmitting part, a receiving part and a signal processing circuit. The experiment was conducted not only the sensor performance but also factors that affect intensity. The main performance of this sensor is resolution of 0.37um and the non-linearity $0.7\%$ FS and the dynamic bandwidth of about 6.3kHz. As a result of rotation test, the prototype sensor showed an equivalent performance to a commercial eddy current sensor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.223-228
• /
• 2001

The thermoacoustic refrigerator has not only considerable possibility but also commercial usability, because it has high reliability, lower vibration, no moving part, and can easily be constructed. In this study, The thermoacoustic refrigerator were constructed. The apparatus is capable of driving closed systems containing He or air at mean pressures ranging from 1-9.3 bar, at frequencies ranging from 100-1000Hz. The resonance characteristics of the thermoacoustic refrigerator were investigated for better performance, The resonance tube is 340.5mm in length. In case of using air as a coolant. Freezing frequency is 174Hz, In case of using He as a coolant Freezing frequency is 625Hz. Using He, The cold-part temperature of the heat exchanger fell to $-23.7^{\circ}C$ after 120 minutes in 70W.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.591-596
• /
• 2001

Micron-size mechanical devices are becoming more prevalent, both in commercial applications and in scientific inquiry. Within the last decade, a dramatic increase in research activities has taken place, mostly due to the rapidly expanding growth of applications in areas of MEMS(Micro-Electro-Mechanical Systems), bioengineering, chemical systems, and advanced energy systems. In this study, we have described the effects of vortex viscosity variation on the flowfields in a micro-slot between rotating surfaces of revolution using a micropolar fluid theory. In order to solve this problem, we have used boundary layer equations and applied non-zero values of the microrotation vector on the wall. The results are compared with the corresponding flow problems for Newtonian fluid. Results show that the coefficient $\delta$ controls the main part of velocity ${\upsilon}_x$ and the coefficient M controls the main part of microrotation component ${\Omega}_{\theta}$.

• 한국중재학회지:중재연구
• /
• 제24권3호
• /
• pp.105-124
• /
• 2014

There is a growing interest in resolving intellectual property rights disputes through arbitration rather than in state courts. The internationalization of commercial relations, one of the most significant drivers of the growth of international arbitration in general, encompasses intellectual property relationships as well. In 2014, the World Intellectual Property Organization Arbitration and Mediation Center revised its arbitration rules. The revision is part of a wave of recent updates of institutional arbitral rules. After briefly introducing the WIPO Center as an arbitral institution, this article assesses the features of the WIPO Rules that make them suitable for the particular challenges of IP-related disputes. A second part reviews the salient new aspects of the WIPO Rules from a comparative perspective.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.253-260
• /
• 2000

In recent years, a number of successful nesting approaches have been developed by using the various heuristic algorithms, and due to their application potential several commercial CAD/CAM packages include a nesting module for solving the layout problem. Since a large portion of the complexity of the part nesting problem results from the overlapping computation, the geometric representation is one of the most important factors to reduce the complexity of the problem. The proposed part representation method can easily handle parts and raw materials with widely varying geometrical shape by using the redesigning modules. This considerably reduces the amount of processed data and consequently the run time of the computer. The aim of this research is to develop parametric macro for two-dimensional layout on the Auto-CAD system. Therefore, this research can be called "pre-nesting".

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.866-872
• /
• 2000

Superplastic forming processes by characteristic of low flow stress and high elongation have advantages to reducing on production cost and weight because of the product of complex form could be made in one part. However superplastically termed part has a characteristic of non-uniform thickness distribution along forming direction. Especially. since the thickness distribution affects on mechanical properties of product. the uniform thickness is very important. There are two solution procedure of implicit and explicit procedure to analyze the superplastic forming. In this study to analyze the thickness distribution two kinds of commercial programs of DEFORM and PAM-STAMP which implicit and explicit code are used respectly. The results from the two Programs were compared with eath other As a result implicit code were more suitable than explicit code for superplastic forming analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.552-552
• /
• 2000

In recent years, a number of successful nesting approaches have been developed by using the various heuristic algorithms, and due to their application potential several commercial CAD/CAM packages include a nesting module for solving the layout problem. Since a large portion of the complexity of the part nesting problem results from the overlapping computation, the geometric representation is one of the most important factors to reduce the complexity of the problem. The proposed part representation method can easily handle parts and raw materials with widely varying geometrical shape by using the redesigning modules. This considerably reduces the amount of processed data and consequently the run time of the computer. The aim of this research is to develop parametric macro for two-dimensional cutting stock on the Auto-CAD system. Therefore, this research can be called "pre-nesting"

• Asia pacific journal of information systems
• /
• 제13권1호
• /
• pp.171-195
• /
• 2003

Providers for the commercial web sites are seriously competing for attraction and retention of customers. However, customer loyalty in the on-line business could be determined by factors different from those in the off-line business. In this paper, determinants for the customer loyalty in the on-line business are analyzed as two parts. The first part includes determinants that foster voluntary customer loyalty, such as satisfaction, self-involvement, and positive characteristics of Internet. The second part includes determinants that foster involuntary customer loyalty, such as switching barrier and bonds. Through the empirical study of 399 survey of Korean Internet users, both voluntary and involuntary factors contributing to the customer loyalty were found. Also, relationship between the positive characteristics of Internet and customer loyalty were found. The understanding of the determinants of customer loyalty will be an important information developing a winning strategy in the on-line business.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.968-974
• /
• 2004

Automakers have been forcing their suppliers to guarantee qualities of parts. Then, the suppliers have met the fundamental quality requirements such as dimensions and functions, but they could not sufficiently satisfy the automakers' noise requirements yet because automatic noise inspection systems were little successfully adopted In mass-production lines. This study tried to develop a system for automatically checking noise radiated from a rotating engine part and filtering parts emitting noise higher than criteria: the upper limits of a overall noise level or a noise spectrum. A commercial noise measurement system was used for measuring noise, and then the noise data was transmitted to a governing program through OLE(object, linking and embedding) functions. The governing program, belonging to a total noise inspection system managed the noise measurement and analysis. This system was successfully adapted for distinguishing bad parts according to the noise criteria.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.19-25
• /
• 1999

This paper addresses a development work of a SLA apparatus on laboratory basis. The SLA test machine is composed of optical, movement, curing and control subsystems. Optical part is performed by a He-Cd laser with mirror combination and mechanical movement is achieved by X-Y table. The developed system is evaluated by several test runs, and shows a good precision capability in forming a basic part. The technique used in this work can be extended to replace the high technology transfer cost of commercial RP machine.