• IE interfaces
• /
• v.7 no.1
• /
• pp.67-74
• /
• 1994

In this study, we propose an integrated CAD(Computer Aided Design) library database in a heterogeneous commercial ECAD(Electronic CAD) environment. To effectively solve engineering problems focused on BOM data extraction we use a software system called schematic capture and company-wide standard electronic part information loaded on different commercial ECADs. We unify many commercial ECADs into one schematic capture and a variety of PCB(Printed Circuit Board) design tools. For this purpose we develope a model for linking CAD symbol library with company-wide standard part information. We also develope a schematic design data conversion scheme and show how to extract PBA level BOM data using our customized schematic capture. This system is being operated in an X-Window based engineering work station and commercial RDBMS base.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.4
• /
• pp.137-144
• /
• 2016

Commercial buildings account for a significant proportion of the total building energy use in Korea, and cooling energy, in turn, accounts for the largest proportion of total energy consumption in commercial buildings. Under this circumstance, chiller staging is considered to be a reasonable and practical solution for cooling energy saving. In this study, the part-load ratio and the operating characteristics of a vapor compression chiller were analysed within an office building. In addition, energy consumption among different chiller staging schemes was comparatively analysed. As a result, significant proportions of total operating hours, cooling load and energy consumption turned out to be in the part load ratio range from 0% through 50%, and thus energy consumption was significantly affected by the chiller COP at low part-load conditions, indicating that the chiller operation at the part-load is an important factor in commercial buildings. In addition, utilizing a sequential chiller staging scheme can reduce the annual cooling energy usage by more than 10.3% compared to operating a single chiller.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.11
• /
• pp.567-573
• /
• 2015

Commercial buildings account for significant portions of the total building energy in Korea, and thus, a variety of research on chiller operation has been carried out. However, most of the studies were carried out on the chiller itself, i.e., the part load ratio characteristics and the corresponding electricity energy consumption patterns were not analyzed in existing studies. In this study, the part load ratio and the operating characteristics of the vapor compression chiller were analyzed within an office building equipped with the conventional variable air volume system. As a result, significant portions of total operating hours, cooling load, and energy consumption turned out to be in the part load ratio range of 0 through 50%. Thus, energy consumption was significantly affected by the chiller COP at low part load conditions, indicating that chiller operation at the part load is an important factor in commercial buildings.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.43
• /
• pp.201-238
• /
• 2009

The purpose of this paper is to describe the contents and issues of the draft legislation of Part VI the Carriage by Air of Korean Commercial Code in respect of the domestic carriage of cargo by air, comparing to the related provisions of the Montreal Convention of 1999 for the unification of certain rules for international carriage by air and the related provisions of Korean Commercial Code in respect of the carriage by land and sea. The Montreal Convention in respect of the international carriage by air was adopted in 1999, and Korea has ratified the Montreal Convention in 2007. However, there is now no national legislation in respect of the carriage by air in Korea. Thus, the Ministry of Justice has prepared the draft legislation of Part VI the Carriage by Air of the Korean Commercial Code in July 2008, and the draft legislation is now being reviewed by the National Assembly. The draft provisions of Part VI the Carriage by Air are basically adopting most of the related provisions of the Montreal Convention in respect of the carriage of cargo by air and some draft provisions are applying the related provisions of the Korean Commercial Code in respect of the carriage of cargo by land and sea. In respect of the carriage of cargo by air, the contents of the draft legislation of Part VI the Carriage by Air are composed of the provisions in respect of the liability of the carrier, the rights of the consignor and consignee, the transport document and others. In respect of the carriage of cargo by air, the issues on the draft legislation of Part VI the Carriage by Air are the problems with respect to the extinguishment of the liability of the carrier, the application for the non-contractual claim, the liability limit of the servants or agents of the carrier, the right of disposition of cargo, the effect of breach of the provision in respect of the air transport document, the prescription of claim of the carrier, the immunity reasons from liability of the carrier for the loss or damage of the cargo, the making out of the air waybill, and the effect of the statement of the air transport document. In conclusion, the national legislation of Part VI the Carriage by Air of the Korean Commercial Code will protect the right and interest of the consignor and consignee, and clarify the right and duty of the parties to the air transport. Also it will contribute to the development of the air transport industry in Korea.

• Journal of the Korean Institute of Navigation
• /
• v.9 no.1
• /
• pp.111-140
• /
• 1985

The Maritime Commercial Part, which based on the CMI Conventions before 1950s, of the Korea Commercial Code has some critical issues to be improper to the morden internaitonal sea trade. This paper, therefore, has proposed a legislative policy and draft articles in order to make a reasonable and proper shipping law.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.36-42
• /
• 2018

In order to expand the application of oxide dispersion-strengthened (ODS) steel, a composite material is manufactured by adding mechanically alloyed ODS steel powder to conventional steel and investigated in terms of microstructure and wear properties. For comparison, a commercial automobile part material is also tested. Initial microstructural observations confirm that the composite material with added ODS steel contains i) a pearlitic Fe matrix area and ii) an area with Cr-based carbides and ODS steel particles in the form of a $Fe-Fe_3C$ structure. In the commercial material, various hard Co-, Fe-Mo-, and Cr-based particles are present in a pearlitic Fe matrix. Wear testing using the VSR engine simulation wear test confirms that the seatface widths of the composite material with added ODS steel and the commercial material are increased by 24% and 47%, respectively, with wear depths of 0.05 mm and 0.1 mm, respectively. The ODS steel-added composite material shows better wear resistance. Post-wear-testing surface and cross-sectional observations show that particles in the commercial material easily fall off, while the ODS steel-added material has an even, smooth wear surface.

• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.1
• /
• pp.75-101
• /
• 2012

As the Reublic of Korea revised the Commercial Code including 40 articles of air transport enacted newly on May 23, 2011, so Korea became first legislative examples in the Commercial Code of the developed and developing countries. I would like to explain briefly the main contents of my paper such as (1) history of enacting newly Part VI (air transport) in the Korea's revised commercial law, (2) legal background enacting newly Part VI (air transport) in the Korea's revised commercial law and the problems on the conditions of air transport, (3) every countries' legislative examples on the civil liability of aircraft's operator, (4) unlawful Interference Convention and general risk convention of 2009, (5) main contents and prospects of the revised Commercial Code for the liability of aircraft's operator etc as the followings. Meanwhile as the Aviation Act, Commercial Code and Civil Code in Korea and Japan did not regulated at all the legal basis of solution on the disputes between victims and offender for the amount of compensation for damage due to personal or property damage caused by aircraft accidents in Korea and Japan, so it has been raised many legal problems such as protection of victims, standard of decision in trial in the event of aircraft accident's lawsuit case. But the Korean Revised Commercial Code including Part VI, air transport regulations was passed by the majority resolution of the Korean National Assembly on April 29, 2011 and then the South Korean government proclaimed it on May 23 same year. The Revised Commercial Code enforced into tothe territory of the South Korea from November 24, 2011 after six month of the proclaimed date by the Korean Government. Thus, though Korean Commercial Code regulated concretely and respectively the legal relations on the liability of compensation for damage in the contract of transport by land in it's Part II (commercial activities) and in the contract of transport by sea in its Part V (marine commerce), but the Amended Commercial Act regulated newly 40 articles in it's Part VI (air transport) relating to the air carrier's contract liability on the compensation for damage caused by aircraft accidents in the air passengers and goods transport and aircraft operator's tort liability on compensation for damage caused by the sudden falling or collision of aircraft to third parties on the surface and so it was equipped with reasonable and unified system among the transport by land, marine and air. The ICAO adopted two new air law conventions setting out international compensation and liability rules for damage caused by aircraft to third parties at a diplomatic conference hosted by it from April 20 to May 2, 2009. The fight against the effects of terrorism and the improvement of the status of victims in the event of damage to third parties that may result either from acts of unlawful interference involving aircraft or caused by ordinary operation of aircraft, forms the cornerstone of the two conventions. One legal instrument adopted by the Conference is "the Convention on Compensation for Damage to Third Parties, Resulting from Acts of Unlawful Interference Involving Aircraft" (Unlawful Interference Convention). The other instrument, "the Convention on Compensation for Damage Caused by Aircraft to Third Parties" (General Risk Convention), modernizes the current legal framework provided for under the 1952 Rome Convention and related Protocol of 1978. It is desirable for us to ratify quickly the abovementioned two conventions such as Unlawful Interference Convention and General Risk Convention in order to settle reasonably and justly as well as the protection of the South Korean peoples.

• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.94-100
• /
• 2022

It is common for commercial vehicles to make the top part according to the use after making the bear chassis, and to connect various devices with the bear chassis. Various brackets used in bear chassis for the development of all automobiles, including commercial vehicles, play a role of connecting the components required for driving and operating the car to the car body. In commercial vehicles, components necessary for operation are installed in the bear chassis; that is, the bear chassis of commercial vehicles is a space where the devices required for driving and operating the vehicle are installed. The devices required for the configuration of the vehicle are drive, brake, exhaust and steering, etc. These devices are basically connected to the body, the front axis, or the rear axis. The part interlinking the apparatuses required for the vehicle drive to the car body or axis is bracket. In this study, we analyzed the boundary conditions to evaluate the stability of the three brackets that connect the components of the car to the front axis of the new type of 30-seater bus in the development process. In order to analyze the boundary conditions, the boundary conditions according to the driving condition of the vehicle were classified. For stress analysis to evaluate the stability of brackets according to the driving state of the vehicle, it is reasonable to give the bracket a boundary condition of harsh conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.3
• /
• pp.239-248
• /
• 2022

This study was conducted to compare sensory and nutritional and digestive properties of the Israeli carp Cyprinus carpio muscle (ICM) by size [normal large (NLF) and small (NSF) fish], part [ventral (VM) and dorsal (DM) muscle], and commercial value [NLF, recessive (RF) or deformed (DF) fish]. In NLF, the major amino acids were lysine, aspartic acid, and glutamic acid, whereas aspartic acid and glutamic acid were predominant in NSF, DM, VM, DF, and RF. Taurine content increased with fish size, and was higher in DM than in VM, and higher in NLF than in DF but lower than that in RF. Regardless of ICM size, part, and commercial value, potassium and iron were expected in the health function, but calcium and zinc were not expected. The major fatty acids present in ICM were 16:0, 18:1n-9, and 18:2n-6, regardless of size, part, and commercial value. The digestion rate of ICM by digestive organ was lower in NLF than in NSF, and lower in VM with a high lipid content than in DM, and lower in DF than in RF.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.6
• /
• pp.422-428
• /
• 2006

In this paper, an NC data optimization approach for enhancing 5-axis machining speed is presented. It is usual to use expensive commercial CAD/CAM programs for NC data of 5-axis machining, since it needs very large calculations for optimal tool positioning and orientation, tool path planning, and collision-free tool path generation. Since commercial CAD/CAM systems have similar functions and efficiency based on common algorithms of reliable theories, they do not have their own unique features for machining speed and efficiency. In other words, most commercial CAD/CAM systems consider only the characteristics of part geometry to be machined, which means that they generate almost the same NC data if the part to be machined is the same, even though different machines are used for the pin. A new approach is proposed for optimizing NC data of 5-axis machining, which is based on the characteristics of the machine to be operated. As a result, the speed of 5-axis machining can increase without losing machining accuracy and surface quality.