• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1418-1420
• /
• 2003

In this study capacitance and dielectric loss tan${\delta}$were measured with frequency changes for commercial $Z_nO$ varistors with pin-type leads and equivalent circuit simulation was proposed. The leakage inductance in pin leads and the stray caoacitance could be seperated from the dielectric characteristics of $Z_nO$ varistors by the simulation of equivalent circuit. The equivalent circuit model considered semiconduction layer, dielectric layer and depletion layer as the grain boundary structure of varistor is well fitted to the observed data.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.123-131
• /
• 2022

The purpose of this study is to improve the mechanical properties and develop manufacturing technology through self-soluble alloy powder flame spray coating on the surface of a run-out table roller for hot rolling. The roller surface of the run-out table should maintain high hardness at high temperatures and possess high wear, corrosion, and heat resistances. In addition, sufficient bonding strength between the thermal spray coating layer and base material, which would prevent the peel-off of the coating layer, is also an important factor. In this study, the most suitable powder and process for roll manufacturing technology are determined through the initial selection of commercial alloy powder for roll manufacturing, hardness, component analysis, and bond strength analysis of the powder and thermal spray coating layer according to the powder.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.37-37
• /
• 2002

Diamoncl/Mo/Ni multi-layers on SKH-51 steel substrate was prepared to improve the abrasive wear resistance of a tool and die by a commercial chemical vapor deposition unit and electro-plating. The diamond after 7 hour deposition had cuba-octahedral structure with 2~5$\mu\textrm{m}$ grains. The existence of non-ferrous metals such as chromium, nickel and molybdenum between diamond and SKH-51 substrate results in forming higher quality of diamond layer by retarding carbon diffusion in the diamond layer during deposition, and also improving hardness and wear resistance. Surface cracks on the film was sometimes observed by the difference of by the thermal expansion coefficients between the steel substrate and the deposited layers during cooling.

• 한국가금학회지
• /
• 제9권2호
• /
• pp.19-62
• /
• 1982

1. The primary purpose of this study was to analyse the current status of layer operations in Korea related to management practices and input and output relationship in egg production by surveying 150 egg producers throughout the country. Based on this primary information, this study attempted to illustrate a model layer farming budget. 2. The average size of the layer operations included in this survey was 7,969 hens per farm during the period from September 1, 1980 to August 31, 1981. However, about 80% of the producers started the layer farming with smaller scales than 3,000 layers and less funds than 10 million won during the later half of 1960s and the early half of 1970s. About 72% of the farmers were graduates from high school or college. These egg producers listed that lack of funds and poor production and management skills are the most important problems in the operation. 3. The farmers used to purchase baby chicks from the well-known hatcheries and commercial mixed feeds on one or two months' credit. While the eggs were sold to wholesalers and/or assemblers. Few of the producers market their products directly or cooperatively through the industry organization.

• 전기화학회지
• /
• 제5권2호
• /
• pp.43-46
• /
• 2002

Commercial titanium rod was anodized in three types of electrolytes such as 0.06 mol/L $\beta-glycerophosphate+0.3mol/L$ calcium acetate, 0.06mol/L $\beta-glycerophosphate+0.3mol/L$ sodium acetate and 0.06 mol/L $\beta-glycerophosphate+5mol/L$ calcium phosphate. The titanium oxide layer $(TiO_2)$ was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and electron spectroscopy chemical analysis (ESCA). Numerous micropores were observed on the titanium oxide layer by SEM. The diameter of micropores increased with the increase of electrolytic voltage. The titanium oxide layer was composed of anatase structure. The phosphorous element was detected at 130 eV binding energy, but calcium was not found in the oxide layer because of lower contents. After anodizing the oxide layer was etched in the 30g/L NaOH solution at $80^{\circ}C$ for 1hr. The surroundings of micropores were much more smoothed and rounded than before alkaline etching.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.87.1-87.1
• /
• 2011

For commercial applications, MEA development must be optimized in order to achieve high performance and low cost. There are many factors that affect the performance of MEA. Especially, the optimization of the method for preparing catalyst layer has great effect on the performance of MEA. Various methods have been used to prepare the catalyst layer of MEA. Among them, spraying method has a merit in that catalysis lay can be prepared with very flexible changes in catalyst layer as well as in the solvent composition of catalyst ink. In addition, in order to reduce the time required for manufacturing catalyst layer, an effort has been made to change the nozzle size and injection pressure of spray system. Further, the operation condition of spray system was changed in various ways in an effort to prepare optimum catalyst layer of MEA. Having optimized the operation condition of spraying system, comprehensive and diverse experiments were carried out concerning various factors that affect the performance of MEA. The present research report describes the results of more sub-categorized and more detailed experiments about the important factors (Nafion$^{(R)}$ ionomer, Relative humidity) which have been shown in previous experiments to exert greater effect on the performance of MEA.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.178-183
• /
• 2006

A Blu-ray disc, which has a more than 25GB optical capacity, has been known as a promising next-generation optical disc format. It commonly has a 1.1 mm thick substrate and a 0.1 mm thick cover layer for beam transmitting and the protection of the reflecting surface. The cover layer is generally formed by the spin coating process. However, in conventional spin coating, small bumps are formed along the rim of the disc, which results in the fatal reading error. Numerical simulation of the thin film flow behaviors during spin coating with the commercial solver and optimal spinning conditions was obtained. Thickness distribution of the cover layer according to the variation of substrate's edge shape could be calculated as well. By modifying the shape of the substrate edge shape, the bumps along the disc rim could be minimized, and it was proved that the chamfered edge, around $5{\sim}10$ degree, is the simplest and most effective way to minimize the bumps.

• Advances in Computational Design
• /
• 제3권2호
• /
• pp.201-212
• /
• 2018

Decrease in availability of suitable subbase and base course materials for highway construction leads to a search for economic method of converting locally available troublesome soil to suitable one for highway construction. Present study insights on evaluation of benefits of stabilization of subgrade soils in term of extension in service life (TBR) and layer thickness reduction (LTR). Laboratory investigation consisting of Atterberg limit, Compaction, California Bearing Ratio, unconfined compressive strength and triaxial shear strength tests were carried out on two types of soil for varying percentages of stabilizers. Vertical compressive strains at the top of unstabilized and stabilized subgrade soils were found out by elastoplastic finite element analysis using commercial software ANSYS. The values of vertical compressive strains at the top of unstabilized and stabilized subgrade, were further used to estimate layer thickness reduction or extension in service life of the pavement due to stabilization. Finite element modeling of the flexible pavement layered structure provides modern technology and sophisticated characterization of materials that can be accommodated in the analysis and enhances the reliability for the prediction of pavement response for improved design methodology. If the pavement section is kept same for unstabilized and stabilized subgrade soils, pavement resting on lime, fly ash and fiber stabilized subgrade soil B will have service life 2.84, 1.84 and 1.67 times than that of unstabilized pavement respectively. The flexible pavement resting on stabilized subgrade is beneficial in reducing the construction material. Actual savings would depend on the option exercised by the designer for reducing the thickness of an individual layer.

• 한국식품과학회지
• /
• 제34권2호
• /
• pp.194-199
• /
• 2002

8품종의 국산밀에 대한 이화학적 특성 및 white layer cake 제조 특성을 조사하였다. 국산밀의 제분율은 $62.5{\sim}71.8%$의 분포로 품종간의 차이가 큰 것으로 나타났다. 국산밀가루의 단백질 함량은 $7.70{\sim}10.58%$의 범위였으며, 회분 함량는 $0.51{\sim}0.71%$의 범위로 수입밀 박력분에 비해 다소 높았다. 국산밀가루의 mixograph 반죽특성에서 우리밀, 알찬밀, 올그루밀의 반죽 물성이 매우 약해 cake의 제조에 적합하였고 은파밀, 그루밀은 단백질 함량에 비해 안전성이 다소 떨어졌으며, 금강밀과 탑동밀가루는 반죽의 안정성이 높은 경질밀의 특성을 보여 cake의 제조에 부적합함을 보여주었다. 국산밀 cake반죽의 pH와 비중은 각각 $6.71{\sim}7.08,\;0.73{\sim}0.76\;g/cc$의 범위로 박력분 반죽과의 차이가 크지 않은 것으로 나타났다. White layer cake의 부피, 비체적은 각각 $837.5{\sim}952.5\;cc,\;2.16{\sim}2.40\;cc/g$의 범위로 알찬밀이 가장 높은 값을 주었다. 국산밀 cake은 symmetry와 uniformity에서 박력분 제조 cake 보다 약간 떨어지는 경향을 주었다. 국산밀 cake의 crumb 색도는 박력분 보다 다소 어둡고 황색도가 높은 것으로 나타났다. 국산밀 cake의 텍스쳐는 품종에 따라 차이를 보였으며 알찬밀, 우리밀에서 경도가 낮아 부드러운 것으로 나타났다.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.621-626
• /
• 2020

This study is aimed at preparing and evaluating the plasma resistance of YAS (Y₂O₃-Al₂O₃-SiO₂) coating layer with crystalline YAG phase contents. For this purpose, YAS frits with controlled phase contents are prepared and melt-coated on sintered Al₂O₃ ceramics. Then, the results of phase analysis of crystalline YAS coating layer are compared to that of YAS frits, and discussed with regard to the plasma resistance of the YAS coating layer. The phase contents of the YAS frit change in a manner different from that of the prepared YAS coating layer, presumably owing to the composition change of YAS frit during the melt-coating process. The plasma resistance of the YAS coating layer is shown to increase with the YAG phase contents in the coating layer. Comparing the weight loss of YAS coating layer with those of commercial Y₂O₃, Al₂O₃, and quartz ceramics, the plasma resistance of the prepared YAS coating layer is 8 times higher than that of quartz and 3 times higher than that of Al₂O₃; this layer shows 70 % of the resistance of Y₂O₃.