• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.16-22
• /
• 2007

Fuel efficiency is one of the major issues in regard to energy and environment. As customers desire more comfortable vehicles, increase of accessory traction force is necessary. Air conditioning system (ACS) consumes the biggest traction force among accessories, especially during summer. This means ACS is the primary object deteriorating fuel economy among accessories. Since direct measurement of traction force and fuel consumption in practical vehicle is difficult, comparison analysis is taken between vehicle with and without ACS working. For this comparison, real time measurements are carried out to know ACS traction force and fuel consumption. As a result of the comparison, a vehicle without ACS operation was 15.92% superior to a vehicle with ACS operating. It could be used as a fundamental material for improvement ACS for better fuel efficiency.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.4
• /
• pp.203-209
• /
• 2009

Dual mass flywheel is the newly developed flywheel system which reduces the noise and vibration and make a better and comfortable ride of cars by adding inertia mass and damping device. However, verification of performance for this system should be carried out since this system is under developing status in our country. Especially, the durability for each part of this system should be guaranteed. Durable properties of driver plate which is the key component of dual mass flywheel were first investigated both in the raw (SCM435 in JIS) and heat-treated material. In addition, fatigue life analysis of driver plate was preformed in the real condition and the results were verified by comparison with the results of rig test.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.1
• /
• pp.51-65
• /
• 2019

A wood-plastic composite (WPC) paver block was manufactured using wood chips waste through an extrusion process, and it was intended to be used for paving in basic rest areas. The first stage in this study covered preliminary tests in terms of flexural strength and dimensional swelling to determine the optimal WPC compounding mix condition, by variation of the WPC ingredients. Next, three different paver blocks including the WPC block, a non-porous cement block, and a porous cement block were tested in terms of various material properties in the laboratory. Finally, two outdoor test sections of the proposed paver blocks were prepared to simulate a basic rest area. Test results indicated that the flexural strength of the WPC paver blocks was about 1.6 times greater than that of the tested cement paver blocks. The WPC block pavement was unaffected by water buoyance as well as volume expansion due to swelling. Results from the impact absorbance test and light falling weight deflectometer (LFWD) test clearly showed that the WPC block paving system marginally satisfied the comfortable and safe hardness range from the pedestrians' perspective, while the results demonstrated that it is structurally sound for application as a road paving block.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1107-1119
• /
• 2020

This study analyzed a subject's body reaction and subjective sensation when wearing a gait-assistive rehabilitation robot. The research method measured skin and clothing surface temperatures for 'seating-standing' and 'walking in place' exercises after wearing a gait-assistive rehabilitation robot. In addition, subjective sensation and satisfaction were evaluated on a 7-point Likert scale. The study results showed that the average skin temperature during exercise while wearing the gait-assistive rehabilitation robot was within a comfortable range. However, during the 'seating-standing' exercise, the skin temperature was slightly lowered. Additionally, the clothing surface temperature tended to be lower than the pre-exercise temperature after all exercises. The subjective sensation evaluation results showed that the wear comfort of the waist part was low during mobility/activity. In addition, an overall improvement in the wear comfort of the robot is necessary. The short-time movement of wearing and walking in the gait-assistive rehabilitation robot did not interfere with the thermal comfort of the body. However, the robot needs to be ergonomically improved in consideration of the long wearing time along with improved material that to satisfy overall wearing comfort.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.62-71
• /
• 2023

Recently, interest in natural fabric materials that are not harmful has increased, and hemp is being studied as a new eco-friendly product. This study produced hemp fabric with improved flexibility and increased antibacterial properties by blending it with Hanji yarn. Various weaving methods were proposed to overcome the rough physical properties of hemp, and the functions of the developed products were evaluated through antibacterial tests. The mixing ratios of hemp and Hanji yarns was 50% hemp: 50% Hanji weft, 70% hemp: 30% Hanji weft, 30% hemp: 70% Hanji weft, and 100% hemp. Overall, the higher the ratio of Hanji yarn, the higher the fastness property, and the higher the ratio of hemp yarn, the higher the flexibility of the fabric, which was evaluated to be comfortable to wear. The 99.9% antibacterial properties of hemp products were considered to contribute to maintaining the health of modern people. Owing to its high intensity and high air permeability, it is considered highly usable in the production of children's clothing with a lot of activity. It was evaluated as an advantage that the disadvantage of hemp, which was limited as a material for summer clothing, was broadened to use for all seasons due to the fusion of Hanji. Otherwise, low consumer satisfaction as an outdoor wear is a disadvantage because hemp products had low elasticity and wrinkles.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.83-84
• /
• 2023

Wall structure smart modular is a building construction method where modules are manufactured in a factory and assembled on-site. This method is gaining popularity in the construction industry as it reduces construction time and mitigates risks such as material supply and labor costs. Wall structure smart modular is necessary as it provides comfortable temporary classroom space during renovation and remodeling of aging school buildings. The structure and characteristics of each type of temporary classroom modular were compared, and wall structure modular showed superior performance in terms of height and weight competitiveness compared to mixed structures. With these advantages, wall structure modular can ensure economic efficiency and recyclability as a temporary classroom. In the future, we aim to compare and analyze the standards such as inter-floor noise and heat transfer coefficient for wall structure and mixed structures.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.10
• /
• pp.1522-1534
• /
• 2008

The subjects of ttis study were middle-aged women in their 40s$\sim$50s and older women aged 60 and over who were living in Seoul and Kyonggi-do, Korea. Through studying the participants' responses to the questions regarding the attributes of image preference in terms of the levels of satisfaction and importance, the target consumers' demand has been studied. And, they are applied to a QFD Matrix, to find out the relationship between the attributes of product quality and the guidelines of clothing design. For this study, clothing image preference is categorized as three types: fashionable and urbane image, elegant and formal image, comfortable and active image. It has also been found that middle-aged and older women think the clothing that projects fashionable and urbane image needs more improvement that those for other images. To review demands for the clothing image preference attribute of formal suits for middle-aged and older women, the priority of these attributes through QFD Matrix that shows the relationship between the attributes and dress elements emphasized by designers has been examined. In reflecting clothing image preference by consumers for their formal two-piece suits, the most important design elements related to material in order of importance were material type, style, thickness and texture, and those related to color were the number of colors used and coloring type.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.220-227
• /
• 2012

After The Ramsar Convention took place in Korea in 2008, public interest in environment heightened, and the government has been allocating its budget for conserving our environment. Therefore, the present study focuses on eco-friendly spatial images particularly shown in ecological museums in Korea which recognizes the value of the environment and the ecology and tries to both protect them and alert people about it. The purpose of this study is proving what consist of eco-friendly spatial images by analyzing the expressive word of eco-friendly images and the image of space, providing a basic data for future space planning of ecological museums. To do this, the present study proceeds in three steps. First of all, the base of research in analyzing stage is firmly established by grasping general theories and terms regarding spatial image. As a second step, the composition and the characteristics of exhibition is clarified through on-spot investigation to provide comparative data for spatial image assessment in the future. Also through this step, we could understand how the exhibits are designed currently. In the last stage of research, expressive words regarding eco-friendly spatial images are extracted and used to analyze the spatial image of ecological museums. And the following three conclusions is deduced. First, the expressive words of eco-friendly spatial image that are extracted are as following: "healthy", "coexisting", "clean", "blending", "warm", "soft", "lively", "pure", "cool", "fresh ", "comfortable", "relaxed", "mild", "free", "harmonious", and "healing". As the second conclusion, color, and material, the formation which is an architectural factor did not have a great impact on forming eco-friendly image, but the color and the material did. The third conclusion was that the display with natural aspects actively utilized increased eco-friendly spatial image.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.800-814
• /
• 2015

This study develops baseball uniforms for amateur baseball players with excellent appearance and functional movement. This study selected a conventional baseball uniform and developed a new one for amateur baseball players with improved function and appearance based on previous research results. In case of developed baseball uniform materials, this study used polyurethane mixed fabric for the top to improve flexibility. A mesh material was used at the armpit, back, and bottom of the top, side line of pants and pockets to improve breathability. In addition, quilted material was added to the knee to improve durability and protection. For the patterns and design, this study used a gusset under the arm to assist in comfortable movement as well as reduced the length of the top and circumference of the hem to decrease unnecessary parts. For the pants, this study used a waistband gripper to avoid the top riding up, added darts behind the knees to bend comfortably, and added additional fabric inside the hem to prevent dirt. In addition, we reduced the width and length of the pants. Wearing evaluation was divided into appearance evaluation by experts and on-site-wearing test by baseball players. The wearing evaluation results for the developed baseball uniform indicated higher evaluations than a conventional baseball uniform in all sections as well as showed significant differences in all sections. The result of movement adaptability evaluation showed the highest satisfaction for 'the top does not ride up' and 'dirt do not get in'.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.363-373
• /
• 2016

This study aims to develop an all-fabric integrated smart jacket in order to create a temperature-regulating system based on a user experience design. For this research, previous research technologies of a textile switch interface and a temperature-regulating system were utilized and a unifying technology for the all-fabric integrated smart jacket was developed which can provide the appropriate temperature environments to the human body. A self-heating textile was applied at the areas of the back and hood in the final tested jacket, and an embroidery circuit was developed in the form of a rectangle in the back and in both ears of the hood, taking into account the pattern of the jacket part where it was be applied and the embroidery production method. The textile switch interface was designed in a three-layer structure: an embroidery circuit line in a conductive yarn, an interval material, and a conductive sensing material, and it was made to work with the input and output sensors through the multiple input method. After the all-fabric integrated smart jacket was produced according to the pattern, all of the textile band lines for transmission were gathered and connected with a miniature module for controlling temperature and then integrated into the inside of the left chest pocket of the jacket. After the users put on this jacket, they were asked to assess the wearing satisfaction. Most of them reported a very low level of irritation and discomfort and said that the jacket was as comfortable as everyday clothing.