• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.57-63
• /
• 2016

In this study, the toxicity of combustion products of wood-based materials (MDF, OSB) were analyzed using experimental animal techniques. The average deed stopping time of MDF was shorter than that of OSB. This means that the toxicity of the combustion products of MDF is higher than that of OSB. To analyze the cause of the result quantitatively, Fourier transform infrared spectroscopy (FT-IR) of the gas phase materials was performed. Qualitative analysis result, CO and $CO_2$ were detected. Quantitative analysis results, the gas generation rate was higher in OSB than in MDF. Blood analysis of mice revealed, COHb to be higher in OSB than MDF. A correlation between the gas generation rate and COHb was found. Currently, the toxicity of the combustion products of the materials is being examined using the toxicity index, such as Fractional Effective Dose (FED). The FED is based on the gas emissions. The average deed stopping time decreased with increasing toxicity of exposed material. On the other hand, the result of this study showed that, the CO emissions of OBS were 186.5% that of MDF. The COHb of OSB was > 129.6% that of MDF. Nevertheless, the average deed stopping time of the OSB is 51 seconds longer than that of MDF. Therefore, more toxicity studies on factors other than the gas phase materials in the combustion products will be needed.

• Journal of Powder Materials
• /
• v.11 no.4
• /
• pp.308-313
• /
• 2004

An experimental study on the combustion of superfine aluminum powders (average particle diameter, a$_{s}$: ∼0.1 ${\mu}{\textrm}{m}$) in air is reported. The formation of aluminum nitride during the combustion of aluminum in air and the influence of the combustion scenario on the structures and compositions of the final products are in the focus of this study. The experiments were conducted in an air (pressure: 1 atm). Superfine aluminum powders were produced by the wire electrical explosion method. Such superfine aluminum powder is stable in air but once ignited it can burn in a self-sustaining way due to its low bulk: density (∼0.1 g/㎤) and a low thermal conductivity. During combustion, the temperature and radiation were measured and the actual burning process was recorded by a video camera. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and chemical analysis were performed on the both initial powders and final products. It was found that the powders, ignited by local heating, burned in a two-stage self-propagating regime. The products of the first stage consisted of unreacted aluminum (-70 mass %) and amorphous oxides with traces of AlN. After the second stage the AlN content exceeded 50 mass % and the residual Al content decreased to ∼10 mass %. A qualitative discussion is given on the kinetic limitation for AlN oxidation due to rapid condensation and encapsulation of gaseous AlN.N.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.7-18
• /
• 2016

This study evaluated the toxicity of the burning gas from the synthetic wood products used in housings or warehouses. The combustion products of five materials, viz. impregnated laminated board, MDF, Douglas fir plywood, core plywood, and Lauan retardant, were analyzed using SEM, FTIR and a Cone Calorimeter. For the Lauan retardant, 256,965 ppm of carbon dioxide ($CO_2$) and 1,475 ppm of sulfur dioxide ($SO_2$) were measured, which are 2.5 times and 3.6 times as high as their lethal concentrations of 100,000 ppm and 400 ppm, respectively. For the impregnated laminated board, 1,569 ppm of nitrogen dioxide ($NO_2$) was measured, which is 6 times as high as its lethal concentration of 250 ppm. For MDF, 795 ppm of ammonia ($NH_3$) was measured, which is higher than its lethal concentration of 750 ppm. As a result, most internal-finishes generated toxic combustion products at levels higher than their lethal concentrations, which underlines the importance of the selection and manufacturing of internal-finish materials.

• Journal of the Korean Society of Combustion
• /
• v.19 no.3
• /
• pp.44-52
• /
• 2014

Solid oxide fuel cell(SOFC) makes electric power using hydrogen or reformed from methane and emits high temperature products that contain flammable species like hydrogen, carbon monoxide and methane which varies with operation condition. SOFC/gas turbine integrated system which uses thermal and chemical energy of the discharges is more efficient than SOFC itself. Burning character of the SOFC products will affect the efficiency and stability of the system. Experiments were conducted to know the characteristics of the flame for two typical composition of SOFC products, i.e. start-up and steady state composition. When coflowing air temperature was higher than $600^{\circ}C$, auto-ignitin occurred for both fuels. Though start-up fuel has higher contents of hydrogen, it makes longer flame than steady state composition. It was inferred that the amount of oxidizer necessary to burn makes this phenomenon. Steady state composition fuel was unstable since it contains lots of water. Nozzle that had 6 holes, distance between each hole was 16.7 times of hole diameter, improved the stability of the flame.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.15-22
• /
• 2019

Coal combustion products are generated during coal combustion and can be grouped into fly ash and bottom ash depending on collection methods. Fly ash and bottom ash can be recycled for various purposes based on their characteristics. Australia is the fourth largest coal production country in the world and reuses coal ash as cement, concrete, mine filler, and agricultural soil amendment. When fly ash is used as a supplement for cement and concrete, strength of the cement and the durability of the concrete can be improved. Use of coal combustion product for mine backfill stabilizes underground mine voids and stores a large amount of coal ash in the voids. Because of alkalinity of coal combustion products, it can neutralize acid mine drainage when used for mine backfill. In addition, it can be used as an agricultural soil amendment to improve acidity and physical properties of the soil and to supply plant nutrients. Recycling of fly ash in Australia will be further expanded because of its low trace element contents that can be toxic to plants and low radioactive element contents existing within soil background concentrations. The characteristics of coal combustion products are related to the characteristics of the coal used for combustion, and since Korea imports coal from Australia, Korean coal combustion products also can be recycled for various purposes.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.83-89
• /
• 2001

Most technologies of reduction process used in the heat treatment of existent metal products are related to metals applied to bolts and parts of automobiles, and nonmetal such as copper. Heating conditions and reduction gases produced in above processes depend on types of products to be treated thermally but heating systems employ electricity commonly and the reduction gases are separated into additional production equipment and a gas dryer and inefficiently provided into the system. Electrical heating system has the advantage of convenient temperature-control but is not economical because of disadvantages of high electricity-running cost and extra installation cost of a transformer. Accordingly, development of the system which has economical heating mode in which provision of reduction gas and heating conditions are unified is necessary for improvement of economy and efficiency in current reduction processes. This study aimed to develop a new advanced heat treatment furnace using catalytic combustion. thereby minimizing the cost during heating, supplying heat and reductive gas at the same time and controlling operating condition freely by changing electrical heating system to heating system by the gas combustion and regeneration of wasted heat.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2015

A series of fire tests was conducted to examine the fire characteristics of flaming and smoldering combustion of engineered wood products, which have been widely used for furniture and finishing materials in buildings. The engineered wood products of MDF, plywood, and chipboard were ignited by a radiant cone heater with incident heat flux of $50kW/m^2$. During the fire test, key parameters representing the fire characteristics such as the heat release rate, yield rate of combustion product, and effective heat of combustion were quantified in terms of thickness. The tests show two peak points of HRRPUA due to lateral fire propagation in the initial stage, followed by later fire penetration through the specimen thickness. The mass loss rate of flaming combustion was 5 times higher than that of smoldering combustion, while the CO yield rate of smoldering combustion was 10 times higher than that of flaming combustion. This study can contribute to the understanding of fire behavior of wood combustibles and provide useful data for fire analysis.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.2
• /
• pp.120-126
• /
• 1995

The effects of heating rate on the combustion temperature, the ignition temperature, the microstrurcture and the shape memory ability of products formed by combustion were investigated. The ignition temperature decreased with increasing heating rate. Combustion temperature and ${\Delta}T$(difference temperature between the ignition temperature and the combustion temperature) increased with increasing heating rate. The grain size of the product increased with increasing heating rate. Combustion synthesis did not completely occur below the heating rate of $10^{\circ}C/min$. NiTi intermetallic compound was completely formed at the heating rate of $600^{\circ}C/min$ and the product by combustion method had a good shape memory effect.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.141-151
• /
• 2004

This study was conducted to evaluate the characterization of the pyrolysis products of tobacco constituents such as cellulose, lignin and tobacco additives. The pyrolysis condition was designed to simulate the pyrolysis/distillation zone$(200\~600^{\circ}C)$ and combustion zone$(700\~950^{\circ}C)$of burning com in the smoking cigarette. The pyrolysis products were determined by GC/MS after pyrolysis using Double-Shot pyrolyzer. In the case of cellulose and lignin, the number of pyrolysis product in the condition that simulate the pyrolysis/distillation zone was much more than the combustion zone simulating one. The major products of cellulose were levoglucosan, furfural, and 1, 6-anhydro-$\beta$-D-glucofuranose and that of lignin were phenol, 2-methoxy phenol, and 1, 2-dimethoxy benzene. In the case of tobacco additives such as 2, 6-dimethyl pyrazine, maltol, and piperonal, the pyrolysis products of these additives were evaporated from the pyrolyszer at least $96\%$ intactly. These results indicate that tobacco constituents such as cellulose and lignin were thermally degraded at the pyrolysis/distillation zone and thoroughly broke down at the combustion zone, but tobacco additives were intactly evaporated from burning com of smoking cigarette.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.765-769
• /
• 2001

The refuse-derived fuel(RDF) is manufactured using waste plastics-based materials and its physical and chemical properties are analyzed. The manufacturing process consists of hand picking, primary magnetic separation, crushing, secondary magnetic separation, feeding and extrusion. The RDF products have a higher calorie content of over 6, 000 ㎉/kg and high stability because the waste plastics and paper are mainly selected. The combustion flue gas of RDF products is satisfied with the emission criteria of incinerator. The heavy metal concentration of combustion byproduct from the RDF boiler is also satisfied with the criteria and appears to be lower concentration than that of a common municipal waste incinerator.