• 한국추진공학회지
• /
• 제22권2호
• /
• pp.125-130
• /
• 2018

항공우주연구원에서는 정지궤도용 우주발사체에 적용 가능한 고성능 상단 엔진에 대한 선행기술 개발이 진행 중에 있다. 한국형발사체(KSLV)는 gas generator를 이용한 개방형 사이클 엔진이며, 저궤도 위성 발사를 위한 발사체로 향후 정지궤도위성 발사체를 위해서는 이보다 높은 비추력을 가진 고효율의 상단엔진이 필요하게 된다. 이러한 요구조건을 충족시키기 위해 다단 연소방식의 엔진이 필요하며, 본 논문에서는 당 연구원이 진행 중인 다단 연소 사이클 엔진 개발 진행 현황과 향후 계획을 기술하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.318-321
• /
• 2005

한국항공우주연구원에서는 55kW급 마이크로 터빈용 엔진에 사용되는 저공해 예혼합 연소기를 개발하였다. 연소기는 역류-캔 형 연소기로써 항공우주연구원에서 설계, 해석 제작 및 시험을 수행하였으며 최종 시험결과, 연소효율 $99.5\%$, NOx 10ppm 미만, Pattern Factor $30\%$이하. 압력 손실 $4\%$이하의 성능을 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.248-255
• /
• 2004

For the compactness of regenerative combustion, self regenerative combustion and embedding regenerator inside furnace are proposed. The Self Regenerative burner system was developed to enhance thermal efficiency and Low Nox emission. In the twin regenerative system, two burner heads are generally used for preheating and exhausting combustion mode. But self regenerative burner system use only single nozzle body for regenerative combustion. Also two kind of regenerator, internal and external type, were designed to operate conveniently in both large and small furnace. According to test result, the self regenerative combustion system gives strong internal exhaust gas recirculation that reduce NOx emission significantly. NOx was measured as 50ppm(5% O2, 1290C furnace temperature). Also it is found that the fuel saving rate due to the self regenerative burner system reach to 30-40%. Thus it can be concluded that self regenerative mild combustion system appears to provide a reasonable regenerative burner for compactness and high performance as compared with conventional twin regenerative burner system. Also in the RT Application , compact twin regenerative burner was developed with the help of embedding regenerator inside furnace.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.368-372
• /
• 2003

There arc two methods to evaluate the combustion product, that is analysis method and measurement method. Properties of the combustion products, constituents, and quanties, can be used to calculate boiler efficiency and beat losses. Using combustion evaluation methods combustion calculation were performed at certain condition and analyze the results. In this paper by comparing the results between two methods, deviation, correction and possibility of site application were confirmed

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.270-278
• /
• 2017

This paper describes development procedure and verification test results of a bi-propellant thruster using hydrogen peroxide and kerosene. The design thrust of the thruster is about 500 N and six swirl type coaxial injectors were used. The passage type manifolds were employed for the injector head to reduce the response time. The passage was designed to minimize stagnation points and recirculation region to ensure uniform flow distribution and sufficient cooling performance through flow analysis using Fluent. A catalytic igniter using hydrogen peroxide was installed at the center of the injector head. The propellant feeding and spray characteristics were confirmed by hydraulic tests. Combustion tests were performed on design and off-design points to analyze combustion characteristics under various mixture ratio conditions. The combustion test results show that combustion efficiency was over 95 % and chamber pressure fluctuation were less than 1.5 % under all test conditions.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.113-123
• /
• 2003

Both numerical analysis and experiment of cold and hot tests were performed to obtain basic design data for the swirl coaxial type Injector and to predict the combustion performance. Mass distribution, mixing distribution, mixing efficiency, characteristic velocity efficiency were measured by the cold tests and numerical analysis using the commercial thermo-hydraulic program. Test and analysis variables were recess, pressure drop, velocity ratio, mixing spray, mixture ratio. Hot tests were performed for the Uni-element injector to compare the performance with the cold test results, and, hot tests for Multi-element injector were performed to compare the performance with Uni-element injector. Designed thrust of the Uni-element injector liquid rocket was 35kgf at sea level and combustion chamber pressure, 20bar. Kerosene and Lox were used as a propellant.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.16-22
• /
• 2012

액체로켓 추력실의 성능 예측 및 초음속 노즐부 형상 설계에 활용 중인 in-house 해석 도구를 이용하여 재생냉각 연소기에 대한 성능/냉각 통합해석을 수행하였으며, 막냉각 유량 및 외곽 분사기열의 혼합비 변화에 따른 연소 성능과 냉각 성능 간 trade-off 경향을 고찰하였다. 향후 막냉각 및 주요 설계 인자의 최적화 도구로 활용될 수 있도록 개발 연소기에 대한 시험 결과와의 비교 등을 통하여 수치해석 도구를 검증/개선해나갈 계획이다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1180-1187
• /
• 2010

In the last decade, hydrogen peroxide has received renewed interest as a green propellant which is non-toxic, environmentally clean and relatively easy to handle. This study was performed to acquire the design technique and combustion performance of a 200N bi-propellant engine using hydrogen peroxide and kerosene. The engine which used a catalytic ignition method was designed and cold flow tests were carried out to investigate atomization characteristics. Combustion tests including a pulse mode operation were performed to investigate the combustion performance on various O/F ratios. The results showed that the combustion efficiency and the repeatability of the engine performance were enough to use as an essential database for the development of a high performance engine.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.130-133
• /
• 2009

액체 로켓 엔진의 경우 작동초기인 점화와 마지막의 소염시의 추진제 공급 순서는 안정적으로 시스템을 운영하는데 많은 영향을 끼친다. 안정적인 엔진의 작동확인을 위해 점화할 때 공급순서와 소염할 때 추진제의 공급 순서를 바꾸어 가면서 연소 실험을 수행 하였다. 본 연구에 사용된 분사기는 과산화수소와 케로신을 추진제로 사용하는 동축 스월형이며, 점화 방식은 촉매 점화를 방식을 사용하였다. 본 실험을 통해서 액체로켓엔진의 연소 시험을 안정적으로 수행하기 위해 점화와 소염할 때의 최적의 시퀀스를 찾아내었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.213-216
• /
• 2004

The results of combustion performance test of fuel-rich gas generator(GG) using LOx and kerosene as propellant at design and off-design point are described. The parameters used in this analysis are the average exit temperature($T_{GG}$) and the characteristic velocity($C^{\ast}$). The average gas temperature at the exit of gas generator is found to be a function of propellant O/F ratio. For the gas generator having residence time of 4msec or more, the effect of flame residence time and combustion chamber pressure on the exit temperature is not significant. The exit characteristic velocity is found to be linearly proportional to the gas temperature at the exit of gas generator.