• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.38-45
• /
• 1988

This study was intended to develop the system automatically controlling travel direction of combine by means of sensing paddy rows. The control system was composed of three detecting levers having different length, micro-switch, microcomputer and electro-hydraulic control system. Sensor and control system developed was tested to estimate optimum design values and its actual performance as installed in combine. The computer simulation and performance test at simulated and actual field were conducted to test for possibility of practical use. The results of the study arc summarized. as follows: 1. The travel traces of combine hiving the conventional sensor with 2 levers and the new sensor detecting the slope of paddy rows were compared through computer simulation. Turning frequency of combine having new sensor was fewer than that of conventional sensor, but the rate of turning for the combine with new sensor was much greater than that of conventional sensor. 2. As sensor was established behind the tip of divider, the sensor itself well followed paddy rows but the tip of divider did not, resulting in divider being deviated from paddy rows. It was analyzed that the sensor should be attached closer to the tip of divider to have a better performance of the control system. 3. The greater the length of sensor lever for given location of sensor attachment and combine forward speed, the higher sensitivity of turning in control system. Moreover, increasing combine speed resulted in a worse performance of control system following paddy rows. Consequently, it was necessary that an optimum length of sensor attachment and for the range of combine operational speed. 4. Field test of combine installed with the sensor and electro-hydraulic system developed in this study showed that it may be operated smoothly and well behaved to paddy rows to 4th gear of combine speed which was 59cm/s. Consequently. it was concluded that the combine with the guidance control system developed in this study may be successfully used for paddy combining.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.48-59
• /
• 1997

Sustained release matrix tablets, pellets, and coated pellets for the delivery of sulindac were prepared using cellulose derivatives at various ratios, and evaluated for the dis solution pattern. The release of sulindac, from matrix tablets prepared with low viscosity HPMC was relatively fast, and especially the tablets made of Metolose SM released all of sulindac within 1 hr. The release of drug from tablets made of other HPMC derivatives were retarded in the order of the following: Pharmacoat 645>Pharmacoat 606>Pharrnacoat 606+HPC-L>HPC-L. The most sustained release pattern was observed with the preparation of high viscous polymer. Metolose 90 SH. While release of sulindac, from matrix type pellet containing 10mg/cap of Metolose 90 SH or 60 SH was completed within 1 hr, a prolonged release formulation (30% in 1 hr) was obtained by the inclusion of EC. Pellets coated with HPMC showed a fast release pattern (${\geq}$ 80% within 2 hrs), whereas pellets coated with HPMC and EC (molar ratio 1 : 1) showed a sustained release pattern (${\geq}$ 80% in 12 hrs), vath the release from EC pellets being the most sustained. Fast (naked) and slow release pellets coated with EC, Metolose 60SH 50cps and propylene glycol. and enteric pellets coated with HPMCP 55 and Myvacet$^{\circledR}$ were prepared, and combined at various ratios for the assessment of dissolution pattern. The result indicates the possibility that the development of 24 hr sustained release delivery systems containing sulindac for oral administration could be achieved by means of combining sustained and fast release pellets at a proper portion.

• The Research Journal of the Costume Culture
• /
• v.28 no.5
• /
• pp.573-590
• /
• 2020

The purpose of this study was to develop contemporary Qipao design that emphasized creative feminine beauty with a unique sense beyond the concept of traditional Qipao design. This would be achieved using the expressive technique of human liberation from the oppression of the unconscious world a supported by surrealism. Using existing literature and previous research, surrealist expression technique used in fashion were investigated and analyzed. The results are as follows. First, the possibility of new and original design beyond existing surrealistic Qipao design was demonstrated through various realistic surrealism expression techniques, such as dépaysement, objet, and trompe-l'œil techniques. This occurred by exploring various unconscious world out of fixed ideas and through expression techniques of surrealistic fashion such as imagery of body parts, metaphorical expression of objects, and position deformation and illusion. Second, Qipao design that combined objet and attempted ordinary escape by combining isolated body parts (such as hands, eyes, and lips) within the composition combine with surrealistic expression enabled various and fun surrealistic fashion designs to emerge. Third, the metaphor of surreal lips and eyes (mainly used in works of this study) presented a unique and extraordinary combination of images in accessories and partial design that used the dépaysement technique. Thus, it was possible to expand surrealistic expression by including LED wire.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.1-14
• /
• 2007

MPICH-G2 is an MPI implementation to solve complex computational problems by utilizing geographically dispersed computing resources in grid environments. However, the computation nodes in MPICH-G2 are exposed to the external network due to the lack of supporting the private IP clusters, which raises the possibility of malicious security attacks. In order to address this problem, we propose MPICH-GP with a new relay scheme combining NAT(Network Address Translation) service and an user-level proxy. The proxy running on the front-end system of private IP clusters forwards the incoming connection requests to the systems inside the clusters. The outgoing connection requests out of the cluster are forwarded through the NAT service on the front-end system. Through the connection path between the pair of processes, the requested MPI jobs can be successfully executed in grid environments with various clusters including private IP clusters. By simulations, we show that the performance of MPICH-GP reaches over 80% of the performance of MPICH-G2, and over 95% in ease of using RANK management method.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.123-131
• /
• 2011

The object of this study is to build service model that combines developing IT technology with construction filed. It combines existing traditional construction project with high-tech IT choosingly, diverting construction project from labour-intensive to value-added technology-intensive industry. By doing so, it plans improving productivity and creation of new market. Now most ideal field of combining construction with IT technology is U-City industry that is being emphasized recently. Therefore, For this study, We analyze present condition of several IT technology used in construction and U-City project. Also, determining priority of promising IT technology for requirement analysis of consumer. And it proposes plan for construction of U-City service model through prospect and environment analysis of U-City and IT industry.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.431-439
• /
• 2017

This study was conducted for the purpose of providing help to preparation of preventive intervention plans on job stress and the quality of life by investigating how resilience affects the relationship between job stress and the quality of life of the employed mentally disabled. As for the methods, this study collected materials by combining mail survey and visiting survey through a self-administered method targeting 113 mentally disabled who have been cared at community psychiatric rehabilitation centers in Seoul and Gyeonggi, and been employed for more than 3 months after the researcher of this study gave explanation to and asked for consent to the staffs of the centers. Study results show that job stress perceived by the employed-disabled exerts a significant influence on the quality of life, and resilience have a significant mediating effect between job stress and the quality of life. Through the above results, this study showed a possibility to apply resilience of the employed mentally disabled as an internal countermeasure, suggesting a comprehensive intervention plan for lowering job stress and improving the quality of life.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.231-236
• /
• 2018

Flowers are one of the most natural expressions of human expression. Recently, these flowers have been applied to various kinds of products to enhance their aesthetic value and to use them as artistic materials expressing their vitality. The purpose of this study is to investigate the formative characteristics of flowers that are visually beautiful and to express them visually through the fusion of various products used in daily life. Based on this research, we study the importance of emotional design that gives satisfaction to consumers and new design expression techniques. In addition, we pursue the aesthetic value of the product with naturalness and original design sense, and develop sensibility product design expressing design sensitivity by combining floral motif with various products based on expression of decoration using image of flower. I would like to suggest the possibility of development of sensible product design.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.241-250
• /
• 2020

In this paper, we propose a direction of teaching method for future generations. In order to suggest such the direction, teaching and learning materials that integrate coding activities and mathematical modeling were developed through top-down and bottom-up processes. Coding and engineering experts and mathematics education experts developed teaching and learning materials through councils (top-down courses) and applied them to 24 high school first graders based on student responses (bottom-up courses). Additionally, the developed curriculum helped students increase interest and motivation and realize conceptual understanding, problem posing, and problem solving in mathematics. On the basis of these results, it provided an idea about how to develop curriculum combining mathematical modeling with coding activities, needed for the fourth industrial revolution.

• Journal of Applied Reliability
• /
• v.12 no.1
• /
• pp.13-24
• /
• 2012

This paper applied the Blue Print and FMEA (Failure Mode and Effect Analysis) to education service in order to raise the education service satisfaction. First, the Blue Print is deployed to come up with strategies to overcome the fail possibility point and waiting point. Next, in order to analyze the fail factors and alternative strategies, the Blue Print of education service is applied to FMEA. The results are as follows; first, the ommission from information document by web-mail or e-mail, Second, thing that selected in spite of company uneducated, thing that omitted despite the company is target, and the unsatisfaction of attendee about training contents. Third, the delay of counsel at the telephone reply, erroneous list of course name and attendee at HRD (Human Resource Development), omission of check whether attends or not. Except for unsatisfaction of attendee, all appears at the process that service delivered. And the unsatisfaction of attendee is about education contents. Both is the factor which have influence on the education service quality. The strategies to remove the failure mode are training and manual development on service and work, a thorough management and check of information system like as ERP (Enterprise Resoure Planning), HRD, education institution list DB (Data Base), on-line application system, a development of education program to offer best education that reflect the user needs and continuously changing environment.