• 에너지공학
• /
• 제7권1호
• /
• pp.122-130
• /
• 1998

A simplified heat transfer model for the cooling capability of the AP 600 PCCS is proposed I this paper. As the PCCS domain is covered with very thin and long water film, it is phenomenologically divided into 3 regions; water entrance effect region, asymptotic region, and air entrance effect region. As the length of the asymptotic region is estimated to be over 90% of the whole domain, the phenomena in the asymptotic region is focused. Using the analogy between heat and mass transfer phenomena in a turbulent situation, a new dependent variable combining temperature and vapor mass fraction was defined. The similarity between the PCCs phenomena in the asymptotic region and the buoyant air flow phenomena on a vertical heated plate is derived. Using the similarity, the simplified heat transfer correlations for the interfacial heat fluxes and the ratios of latent heat transfer to sensible heat transfer were established. To verify the accuracy of the correlation, the results of this study were compared with those of other numerical analyses performed for the same configuration and they are well within the range of 15% difference.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.86-92
• /
• 1997

When Lubricants is used under severe running condition, tribological characteristics is very important. I have studied the lubricating oil viscosity, kinds of additives and lubricating oil temperatures were changed. In order to study the effect of oil temperature on the wear of the surface, the temperature of the oil was changed for the same sample. Moreover, the temperatures of three kinds of oils which have very different viscosities at room temperature, were varied while the oil viscosity was unchanged. It was shown from the test results that wear is not greatly affected by the amount of ZnDTP antiwear agent, but E-P additives are less effective against wear than ZnDTP additives. The viscosity of lubricating oil and its tempea-ature greatly affect the wear of the surface. Combining all the wear data with those of the surface strength, it was observed that the higher the load, the lower the scratch of wear, and also in the case of the same running load, the lower the wear, the longer the life of the surface strength.

• 대한치과마취과학회지
• /
• 제8권2호
• /
• pp.127-127
• /
• 2008

Recently combining regimen of minimal doses of chloral hydrate, hydroxyzine and midazolam is good in sedation of children. Midazoalm, water soluble benzdiazepine, has rapid onset and relatively short duration of action. And midazolam has prospective amnesic effect. With these advantages midazolam is popular in conscious sedation for children. This study was to reveal the dose-dependency of behavior and physiologic effects of submucosal midazolam. Sedation records were surveyed retrospectively, of which the patients admitted from April, 2005 to July, 2007. we assigned three groups according the dose of midazolam, 0.1 mg/kg, 0.2 mg/kg and 0.3 mg/kg, respectively and the behavioral evaluation was analyzed with Houpt scale statistically. Combined submucosal midazolam increased the success rate in sedation and the vital signs were stable during sedation.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.193-197
• /
• 2005

Classification tree is one of the most suitable base learners for ensemble. For past decade, it was found that bagging gives the most accurate prediction when used with unpruned tree and boosting with stump. Researchers have tried to understand the relationship between the size of trees and the accuracy of ensemble. With experiment, it is found that large trees make boosting overfit the dataset and stumps help avoid it. It means that the accuracy of each classifier needs to be sacrificed for better weighting at each iteration. Hence, split effect in boosting can be explained with the trade-off between the accuracy of each classifier and better weighting on the misclassified points. In bagging, combining larger trees give more accurate prediction because bagging does not have such trade-off, thus it is advisable to make each classifier as accurate as possible.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.64-74
• /
• 2001

This study is to find the effect of the molecular weight distribution of components on the freeness and physical properties of paper by observing the change of properties according the modification of fibers by using production technology and process technology together to develop additives which can effectively control according to the purpose of paper-making process and by combining low molecular weight cellulase (below MW 20,000; CMC activity 400 unit) with different enzyme's molecular weight and activity and high molecular weight cellulase(MW 20,000∼80,000;CMC activity 90,000 unit) and then process them in Sw-BKP(Softwood Bleached Kraft Pulp) and Hw-BKP(Hardwood Bleached Kraft Pulp) and Cotton Linter Pulp and OCC(Old Corrugated Container) with different properties of pore of surface of fibers respectively, since it is judged that making the appropriate composition ratio of components is necessary in consideration of the properties of fibers and paper-making process.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1429-1440
• /
• 2008

In a meta-analysis combining the results from different clinical trials, it is important to consider the possible heterogeneity in outcomes between trials. Such variations can be regarded as random effects. Thus, random-effect models such as HGLMs (hierarchical generalized linear models) are very useful. In this paper, we propose a HGLM framework for analyzing the binominal response data which may have variations in the odds-ratios between clinical trials. We also present the prediction intervals for random effects which are in practice useful to investigate the heterogeneity of the trial effects. The proposed method is illustrated with a real-data set on 22 trials about respiratory tract infections. We further demonstrate that an appropriate HGLM can be confirmed via model-selection criteria.

• 약학회지
• /
• 제56권1호
• /
• pp.66-69
• /
• 2012

This study aims to assess the aggregate contribution of new drugs to the increase in life expectancy. We constructed a panel data combining mortality data in KOSIS and a drug dataset generated by assigning new drugs listed in 2000~2009 to their respective ICD codes. We found that 10% increase in stock of new drug led to 0.13~0.27% increase in the probability of survival to age 65. Due to lack of disease-specific life table, we used indirect approach to estimate the effect of new drugs on longevity. Using ordinary least squares, the estimate of the probability of survival to age 65 (logarithm) on life expectancy for all ages was 24.92. In conclusion, the increase in life expectancy of the entire population in Korea between 2000 and 2009 resulting from NMEs is 1.95 years, which explains 46.6% of real increase in life expectancy.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.41-53
• /
• 1999

The effect of menu width and depth on the efficiency of information search and menu preference was investigated to identify an optimal menu structure for EIG which reflects the characteristics of human information processing. Information search time increased stepwisely as the menu width exceeded 6 items and linearly as the level of menu depth increased. The linear relationship between the error rate and the number of depth levels seems to be caused by the increase in the items to be remembered. When a menu structure was constructed by combining different menu depths and widths, it was observed that making the menu width wider rather than the depth deeper allows better information search. The menu structure rated as the most preferable and the easiest to user was that of pyramidal form. Such a result seems to come from its structural similarity to general categories which people get used to and implies that one should consider user preference as well as efficiency of search when he/she designs an EIG menu.

• 한국항해학회지
• /
• 제20권4호
• /
• pp.1-6
• /
• 1996

A vessel in distress might be well identified when both the variables affecting the drifting of the vessel and the extent to which the variables affect the drifted vessel are known. And also the disembarking place inside the ship might be easily located if the drifting poised is forecasted. The forecasting method of the drifting poise is resolved by combining the vectors of the current and the wind. It is, however, very hard to forecast the effect of the wind, which should be mainly determined by field survey. This study aims at identifying the drifting characteristics of medium/large ships, considering only the effect of the wind. The experiment revealed the following results. $\circled1$ The drifting poise is determined by the aspect ratio of the ship and the shape of the superstructure of the ship. $\circled2$ Drifting direction is quite stable when wind speed goes over a certain level. $\circled3$ Drifting speed is 3-7% of the wind speed in case of T/S Hannara.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 5월 학술대회지
• /
• pp.215-218
• /
• 2003

In this paper we apply PMC (parallel model combination) to speech recognition system online. As a representative of model based noise compensation techniques, PMC compensates environmental mismatch by combining pretrained clean speech models and real-time estimated noise information. This is very effective approach for compensating extreme environmental mismatch but is inadequate to use in on-line system for heavy computational cost. To reduce the computational cost and to apply PMC online, we use a noise masking effect - the energy in a frequency band is dominated either by clean speech energy or by noise energy - in the process of model compensation. Experiments on artificially produced noisy speech data confirm that the proposed technique is fast and effective for the on-line model compensation.