• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.148-152
• /
• 2001

This study investigated the role of excitatory amino acid systems in the initiation of organophosphate-induced seizures and brain damages in rats through quantitative in vivo microdialysis. Microdialysates were collected from the hippocampus of rat brain, treated with diisopropylfluorophosphate (DFP; 2.67 mg/kg, s.c.) alone, and/or atropine sulfate (15 mg/kg, i.m.) and procyclidine (30 mg/kg, i.m.). The protective effects of atropine, a muscarinic blocker, and/or procyclidine, a N-methyl-D-aspartate and cholinergic antagonist, against DFP were examined. DFP treatment increased the levels of aspartate (Asp) and glutamate (Glu) significantly in the hippocampal persuate with the induction of seizures. Treatment of procyclidine could effectively block the increase of Asp and Glu levels. Atropine treatment showed no significant anticonvulsive effects against DFP-induced seizures. The increases of Asp and Glu levels by DFP were also completely blocked through the combined treatment of atropine and procyclidine. Histopathological findings on the hippocampus confirmed the above results. More effective protection was observed through the treatments of procyclidine alone or of both procyclidine and atropine than atropine alone against DFP-induced brain damage. Procyclidine was shown to be effective in DFP-induced seizures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.188-193
• /
• 2015

It has been generally recognized that $N_2O$(Nitrous Oxide) emission from marine diesel engines has a close correlation with $SO_2$(Sulfur Dioxide) emission, and diversity of fuel elements using ships affects characteristics of the $N_2O$ emission. According to recent reports, in case of existence of an enough large NO(Nitric Oxide) generated as fuel combustion, effect of the $SO_2$ emission in exhaust gas on the $N_2O$ formation is more vast than effect of the NO. Therefore, $N_2O$ formation due to the $SO_2$ element operates on a important factor in EGR(Exhaust Gas Recirculation) systems for NOx reduction. An aim of this experimental study is to investigate that intake gas of the diesel engine with increasing of $SO_2$ flow rate affects $N_2O$ emission in exhaust gas. A test engine using this experiment was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition was set up at a 75% load. A standard $SO_2$ gas with 0.499%($m^3/m^3$) was used for changing of $SO_2$ concentration in intake gas. In conclusion, the diesel fuel included out sulfur elements did mot emit the $SO_2$ emission, and the $SO_2$ emission in exhaust gas according as increment of the $SO_2$ standard gas had almost the same ratio compared with $SO_2$ rate in mixture inlet gas. Furthermore, the $N_2O$ element in exhaust gas was formed as $SO_2$ mixture in intake gas because increment of $SO_2$ flow rate in intake gas increased $N_2O$ emission. Hence, diesel fuels included sulfur compounds were combined into $SO_2$ in combustion, and $N_2O$ in exhaust gas should be generated to react with NO and $SO_2$ which exist in a combustion chamber.

• Journal of Intelligence and Information Systems
• /
• v.18 no.4
• /
• pp.43-57
• /
• 2012

To enhance the competitive advantage in a constantly changing business environment, an enterprise management must make the right decision in many business activities based on both internal and external information. Thus, providing accurate information plays a prominent role in management's decision making. Intuitively, historical data can provide a feasible estimate through the forecasting models. Therefore, if the service department can estimate the service quantity for the next period, the service department can then effectively control the inventory of service related resources such as human, parts, and other facilities. In addition, the production department can make load map for improving its product quality. Therefore, obtaining an accurate service forecast most likely appears to be critical to manufacturing companies. Numerous investigations addressing this problem have generally employed statistical methods, such as regression or autoregressive and moving average simulation. However, these methods are only efficient for data with are seasonal or cyclical. If the data are influenced by the special characteristics of product, they are not feasible. In our research, we propose a forecasting framework that predicts service demand of manufacturing organization by combining Case-based reasoning (CBR) and leveraging an unsupervised artificial neural network based clustering analysis (i.e., Self-Organizing Maps; SOM). We believe that this is one of the first attempts at applying unsupervised artificial neural network-based machine-learning techniques in the service forecasting domain. Our proposed approach has several appealing features : (1) We applied CBR and SOM in a new forecasting domain such as service demand forecasting. (2) We proposed our combined approach between CBR and SOM in order to overcome limitations of traditional statistical forecasting methods and We have developed a service forecasting tool based on the proposed approach using an unsupervised artificial neural network and Case-based reasoning. In this research, we conducted an empirical study on a real digital TV manufacturer (i.e., Company A). In addition, we have empirically evaluated the proposed approach and tool using real sales and service related data from digital TV manufacturer. In our empirical experiments, we intend to explore the performance of our proposed service forecasting framework when compared to the performances predicted by other two service forecasting methods; one is traditional CBR based forecasting model and the other is the existing service forecasting model used by Company A. We ran each service forecasting 144 times; each time, input data were randomly sampled for each service forecasting framework. To evaluate accuracy of forecasting results, we used Mean Absolute Percentage Error (MAPE) as primary performance measure in our experiments. We conducted one-way ANOVA test with the 144 measurements of MAPE for three different service forecasting approaches. For example, the F-ratio of MAPE for three different service forecasting approaches is 67.25 and the p-value is 0.000. This means that the difference between the MAPE of the three different service forecasting approaches is significant at the level of 0.000. Since there is a significant difference among the different service forecasting approaches, we conducted Tukey's HSD post hoc test to determine exactly which means of MAPE are significantly different from which other ones. In terms of MAPE, Tukey's HSD post hoc test grouped the three different service forecasting approaches into three different subsets in the following order: our proposed approach > traditional CBR-based service forecasting approach > the existing forecasting approach used by Company A. Consequently, our empirical experiments show that our proposed approach outperformed the traditional CBR based forecasting model and the existing service forecasting model used by Company A. The rest of this paper is organized as follows. Section 2 provides some research background information such as summary of CBR and SOM. Section 3 presents a hybrid service forecasting framework based on Case-based Reasoning and Self-Organizing Maps, while the empirical evaluation results are summarized in Section 4. Conclusion and future research directions are finally discussed in Section 5.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.1-22
• /
• 2009

The World Wide Web is transitioning from being a mere collection of documents that contain useful information toward providing a collection of services that perform useful tasks. The emerging Web service technology has been envisioned as the next technological wave and is expected to play an important role in this recent transformation of the Web. By providing interoperable interface standards for application-to-application communication, Web services can be combined with component based software development to promote application interaction and integration both within and across enterprises. To make Web services for service-oriented computing operational, it is important that Web service repositories not only be well-structured but also provide efficient tools for developers to find reusable Web service components that meet their needs. As the potential of Web services for service-oriented computing is being widely recognized, the demand for effective Web service discovery mechanisms is concomitantly growing. A number of techniques for Web service discovery have been proposed, but the discovery challenge has not been satisfactorily addressed. Unfortunately, most existing solutions are either too rudimentary to be useful or too domain dependent to be generalizable. In this paper, we propose a Web service organizing framework that combines clustering techniques with string matching and leverages the semantics of the XML-based service specification in WSDL documents. We believe that this is one of the first attempts at applying data mining techniques in the Web service discovery domain. Our proposed approach has several appealing features : (1) It minimizes the requirement of prior knowledge from both service consumers and publishers; (2) It avoids exploiting domain dependent ontologies; and (3) It is able to visualize the semantic relationships among Web services. We have developed a prototype system based on the proposed framework using an unsupervised artificial neural network and empirically evaluated the proposed approach and tool using real Web service descriptions drawn from operational Web service registries. We report on some preliminary results demonstrating the efficacy of the proposed approach.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.284-309
• /
• 2007

Technology transfer (TT) consortium is an affiliation of two or more public research institutions (PRIs) that participate in a common technology transfer activity or pool their resources together, with the objective of facilitating technology transfer. Based on empirical analysis of five regional TT consortia (2002-2006) operating in Korea, this paper suggests their effectiveness by employing a TT performance index (TTPI) and identifies possible characteristics involved, such as motivations, facilitators, barriers, and challenges. TTPI devised in the paper is a new composite TT performance index to measure how much the TT performance of a PH changed in a designated year compared to a base year. All the performance indicators of TTPI are well-structured based on the unique TT process that is prevalent in Korea. Further, TTPI can bring different size and focus of PRIs to the same scale for comparison by double-normalizing. The paper tests the effectiveness of TT consortium for the escalation of TT performances in member PRIs by highlighting the differences of TTPI's between 2005 and 2001. As a result, the paper found that the escalation of TTPI for member PRIs was greater than that for non-member PRIs. As for the characteristics of TT consortia, their respective factors obtained by TT expert survey were computed with proportion tests of differences (Z tests) to compare two perspectives between intramural and extramural groups. One of key findings is that there is general homogeneity in stakeholder perspectives regarding motivations, facilitators, barriers, and challenges. Some notable responses are as follow; the most probable motivation to join TT consortium is to share or exchange TT competences for enhanced performance. Second, the most probable facilitator is professional capability of consortium-hired personnel. Third, the foremost probable barriers to effective TT consortium are frequent change of consortium director and passive participation of member PRIs. Lastly, both publicizing TT consortia and developing performance metrics are the most important for the improvement of TT consortia. The understanding of the characteristics of TT consortia increases the likelihood of accelerated success, because TT consortia path from formation to termination encompasses many concepts, processes, principles, and factors. Finally, an analysis of the survey data combined with expert interview and observation data led the authors to derive five conditions as being critical to viable TT consortia in Korea at early stage of technology transfer systems. These conditions include policy infrastructure, proactive participation, excellent professionals, personal motivation, and teaming mechanisms. It is expected that the Korean evidence is a starting point to develop and refine the theory of TT consortia and for additional studies in other countries.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.278-284
• /
• 2011

To obtain optimum configuration method and livestock wastewater loading in small-scale livestock wastewater apparatus by natural purification method for treating livestock wastewater, the small-scale livestock wastewater apparatuses were constructed with 9 kinds of combined systems such as aerobic bed (ae)-anaerobic bed (an), ae-ae, ae-anoxic bed (ox), an-an, an-ae, an-ox, ox-ae, ox-an and ox-ox livestock wastewater treatment apparatuses. Under different configuration methods, the removal rate of COD in Ae-Ae and Ae-An livestock wastewater treatment apparatus was higher than that in other configuration methods. The removal rate of T-N in Ae-An livestock wastewater treatment apparatus was higher than that in other configuration methods. Removal rates of SS and T-P were not different regardless of configureation methods in small-scale livestock wastewater treatment apparatus. Under different livestock wastewater loading, the removal rates of pollutants were higher in the order of $50L\;m^{-2}\;day^{-1}{\fallingdotseq}100L\;m^{-2}\;day^{-1}\;>\;200L\;m^{-2}\;day^{-1}$. Therefore, optimum configuration method was Ae-An livestock wastewater treatment apparatus, and optimum livestock wastewater loding was $100L\;m^{-2}\;day^{-1}$ in small-scale livestock wastewater treatment apparatus.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2003

Purpose : Maxillary sinus cancers are usually locally advanced, and involve the structures around sinus, but the regional lymphatic spread is uncommon. Therefore, the local control of these cancers is important for their cure. We reviewed our experience of 55 patients with squamous cell carcinomas of the maxillary sinus, treated with radiation therapy, and looked for the role of radiation therapy in maxillary sinus cancers. Materials and Methods : Between November 1982 and October 1999, 55 patients with squamous cell carcinomas of the maxillary sinus underwent either radiation therapy only, or combined with surgery or with concurrent chemoradlation therapy. All patients were restaged according to the 1997 AJCC staging systems. The T classifications of the tumors of the patients were as follows 1.8$\%$ (1/55) for 72, 81.8$\%$ (45/55) for 73 and 16.4$\%$ (9/55) for 74. Thirteen patients were diagnosed with lymph node involvement. With the surgical procedures, 12 patients were managed by biopsy only, 21 were resected by FESS (funclienal endoscopic sinus surgery) and 22 by partial/medical/total rnaxillectomies. The details of the treatments were as follows 8 patients were treated with radiation therapy only, 17 with a combination of FESS and radiation therapy, 22 with a combination of a maxillectomy and radiation therapy, 4 with a combination of preoperative radiation therapy and surgery, and 4 with concurrent chemoradiation therapy. The mean follow-up for all patients was 25 months, ranging from 2.8 to 125 months. Results : The 4-year local control and survival rates for all Patients were 45.5 and 33.3$\%$, respectively. The 4-year local control and suHival rates, due to the extent of surgery, were as follows 32.1, and 21.4$\%$ for biopsy; 41.9, and 31.7$\%$ for FESS; and 56.8, and 52.7$\%$ for maxillectomy, respectively. Twenty-nine (52.7$\%$) patients were not cured, and of these 29 patients, 23 (79.3$\%$) patients had a iocal recurrence following treatment. Conclusions :This study has shown that the major failure sites following treatment to be the local regions, and that the completeness of surgery was important for improving the local control and survival of patients with squamous cell carcinoma of the maxillary sinus.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.257-267
• /
• 2008

The mentophysical disease causes diseases in digestive, respiratory, circulating systems, including chronic pain, through combined reactions from different individual characteristics, mental stress and temperamental factors. The most common symptom related to orofacial area is pain and the contributive factors include biological, behavioral, environmental, social, emotional, recognitive factors. These factors affect the course of the symptom according to individual's character and human nature. In pain, sleep acts as a contributive factor, and pain could bring about sleep disturbance and vice versa. Deterioration of sleep quality would act as a factor that aggravates mental stress. Therefore, relatively accurate and simple mental examinations and sleep quality test should be carried out for the patients with symptoms related to orofacial area. This study evaluated the mental state in relation to the sleep quality which could affect orofacial pain. The number of poor sleeper was 18 in male subjects, and 1 in female subjects and PSQI global index was higher in male($6.11{\pm}2.38$) than female($4.67{\pm}2.18$). SCL-90-R index showed no sex difference. Poor sleeper showed significantly high value in SOM, O-C, I-S, ANX, PHOB, PSY, GSI, PST. When SCL-90-R T scores were compared according to sleep quality, higher the subjective sleep quality score, O-C and I-S showed significant increase. As sleep disturbances score increased, PAR, PSY, PST showed statistically significant increase. In comparison of SCL-90-R T score according to daytime dysfunction, statistically significant increase in DEP, ANX, HOS, PHOB, PAR, GSI was observed. Therefore, the quality of sleep and psychological status have a high correlation. This is likely to influence chronic pain in the orofacial field. As a result, clinicians treating orofacial pain should evaluate the sleep quality and psychological status of the patient. Further studies of larger sample sizes including various age, occupation, and pain groups are necessary in order to apply the results to clinical practice.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.146-162
• /
• 2017

Multibeam and seismic data in the northwestern part of the Ulleung Basin were analyzed to study stratigraphy and evolutionary history of submarine canyon. A detailed analysis reveals that the sedimentary sequences in this area consist of four stratigraphic units separated by erosional unconformities. On the continental slope, these units are dominated by well-stratified facies with some slope failures, whereas these units show well-stratified and chaotic facies toward the basin floor. Generally, the sediment thickness is relatively thin on the slope, whereas thick sediment accumulation occurs on the base of slope and basin floor. Based on seismic characteristics and distribution, the deposition of each units are well correlated with the evolutionary history of the submarine canyon. Unit 1 directly overlying the acoustic basement has thin sediment layer on the slope, whereas its thickness gradually increase toward the basin floor. Compared to other units, Unit 2 is relatively thick accumulations on the slope and contains some slope failures related to faults systems. The mass transport sediments due to slope failures, mainly deposited on the base of slope as a submarine fan. The width and depth of submarine canyon increase due to dominant of the erosional process rather than the sediment deposition. Unit 3 is thin accumulation on the slope around the submarine canyon. Toward the basin floor, its thickness gradually increases. Unit 4 is characterized by thin layers including slides and slumps on the slope, whereas it formed thick accumulations at the base of slope as a submarine fan. The increase in the width and depth of submarine canyon results from the dominant of the erosional process and slope failures around the submarine canyon. Consequently, the formation of sedimentary units combined with the development of submarine canyon in this area is largely controlled by the amounts of sediment supply originated from slope failures, regional tectonic effects and sea-level fluctuations.