• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.33.1-33.1
• /
• 2011

Strontium doped lanthanum manganite (LSM) with perovskite structure for SOFC cathode material shows high electrical conductivity and good chemical stability, whereas the electrical conductivity at intermediate temperature below $800^{\circ}C$ is not sufficient due to low oxygen ion conductivity. The approach to improve electrical conductivity is to make more oxygen vacancies by substituting alkaline earths (such as Ca, Sr and Ba) for La and/or a transition metal (such as Fe, Co and Cu) for Mn. Among various cathode materials, $LaSrMnCuO_3$ has recently been suggested as the potential cathode materials for solid oxide fuel cells (SOFCs). As for the Cu doping at the B-site, it has been reported that the valence change of Mn ions is occurred by substituting Cu ions and it leads to formation of oxygen vacancies. The electrical conductivity is also affected by doping element at the A-site and the co-doping effect between A-site and B-site should be described. In this study, the $La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_{3{\pm}{\delta}}$ ($0{\leq}x{\leq}0.4$) systems were synthesized by a combined EDTA-citrate complexing process. The crystal structure, morphology, thermal expansion and electrical conductivity with different Sr contents were studied and their co-doping effects were also investigated.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제12권5호
• /
• pp.2067-2077
• /
• 2011

The recent trend in technology development is characterized as technology convergence, mainly between IT, BT and NT and also more and more industries are starting to use several technologies simultaneously or in a combined way theses days. As a result, the needs on technology interaction analysis is increasing for strategic technology management and policy-making. Responding to the needs, this research deals with technology innovation process in terms of technology competition, particularly focusing on the 17 new growth drivers in 3 areas, which has been announced by the Korean government as a new growth vision for Korean economy, and analyzing their co-evolutionary process. For the analysis, patent data, a representative data on technology innovation, is adopted. Then, Lotka-Volterra Competition model, a model frequently used to describe the dynamism of competitive innovation is applied to the data. The research results are expected to support strategic decision-makings such as effect policy-making or R&D priority-setting, by analyzing the relationship between the 3 areas, the 17 new growth drivers, or the particular technologies in the drivers.

• Journal of Intelligence and Information Systems
• /
• 제13권3호
• /
• pp.1-15
• /
• 2007

Recently, semantic web technology, represented by ontology building, is being combined with web services technology, creating 'Semantic Web Services' as a new promising field in information retrieval research. Accordingly, many brokering and matchmaking agents are being developed and used in the field. However, literature review revealed that most models do not take QoS(Quality of Services) into consideration. In this study, a QoS-augmented matchmaking algorithm is developed based on service availability, response time, maximum transaction amount, reliability, accessibility and price as critical QoS items. A prototype for Intelligent Semantic Web Services System is developed using publicly available data. Performance test was conducted and reported at the end.

• Journal of Acupuncture Research
• /
• 제23권3호
• /
• pp.103-115
• /
• 2006

Alzheimer's disease (AD) is the most prevalent form of neurodegenerative disease associated with aging in the human population. This disease is characterized by the following 4 structural changes : Atrophy of the Cortex, Parasympathetic, and other neural cells, the existence of Neurofibrillary tangles (NFTs), and the accumulation of Senile plaques. NFTs and Senile plaques is known to be the index of this disease. Senile plaques disturbs the neutro transmission and depletes of Acetylcholine. So, Recovery of Acetylcholine is the primal objective for treating Alzheimer's disease. So, Inhibiting the activity of Acetylcholine Esterase (AChE), which causes the hydrolysus of acetylcholine into choline and acetate, can be seen as a key role for treating Alzheimer's disease. Increasing body of evidence has been demonstrated that Bee Venom Acupuncture (BV) could compete with complex protein involving in multiple step of $NF-_{\kappa}B$ activation and exert the anti -inflammatory potential of combined inhibition of the prostanoid and nitric oxide synthesis systems by inhibition of IKK and $NF-_{\kappa}B$. The effect of BV through behavioral tests after memory impairment induced by Scopolamine. We examined the improving effect of BV on the Scopolamine (1 mg/Kg, i.p.)-induced memorial impairment using passive avoidance response and water maze tests in the mice. BV (0.84, $1.67\;{\mu}g/ml$) reversed the Scopolamine-induced memorial impairment in dose dependent manner. This study therefore suggests that BV acupuncture method may be useful for prevention of development or progression of AD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제24권6B호
• /
• pp.1024-1031
• /
• 1999

In order to transmit high-speed wide band signals efficiently in multipath fading environments, M-ary QAM signalling combined with OFDM transmission technique is applied. In this paper, the effect of synchronization error caused by carrier frequency offset and SER(Symbol Error Rate) performance of OFDM-16QAM and OFDM-64QAM are theoretically analyzed. Our result shows that as the number of sub-carrier in OFDM system increases the frequency-offset caused inter-channel interference(ICI) increases significantly, and that an error floor occurs even at high SNR of OFDM system. For OFDM-64QAM, the error floor occurs at SER=1$\times$10-7 when a normalized frequency-offset is 0.001, in which the SNR degradation is much greater than that of OFDM-16QAM. From this study the maximum allowable frequency-offset of OFDM-16QAM and OFDM-64QAM systems can be determined to meet the specific SER requirement.

• Journal of Environmental Science International
• /
• 제14권12호
• /
• pp.1185-1194
• /
• 2005

The runoff characteristics of non-point source pollutions in the municipal area of Jeonju were investigated and analyzed by using the SWMM (Storm Water Management Model). The flow rates and water qualities of runoff from two types of drainage conduits were measured respectively. One was a conventional combined sewer system and the other was a separated sewer system constructed recently From August to November in 2004, investigations on two rainfall events were performed and flow rate, pH, BOD, COD, SS, T-N and T-P were measured. These data were also used for model calibration. On the basis of the measured data and the simulation results by SWMM, it is reported that $80-90\%$ of pollution load is discharged in the early-stage storm runoff. Therefore, initial 10-30 mm of rainfall should be controlled effectively for the optimal treatment of non-point source pollution in urban area. Also, it was shown that the SWMM model was suitable for the management of non-point source pollution in the urban area and for the analysis of runoff characteristics of pollutant loads.

• Journal of Advanced Navigation Technology
• /
• 제20권2호
• /
• pp.161-166
• /
• 2016

In high capacity and long haul optical communication systems, signal distortion is induced by chromatic dispersion and nonlinear effects of optical fibers. Dispersion management (DM) combining with mid-spans spectral inversion (MSSI) is one of the various techniques for overcoming this drawback. The most simple configuration of DM link is obtained by uniformly distributing the lengths of single mode fiber (SMF) and residual dispersion per span (RDPS) over whole fiber spans consisted of optical link. In this paper, the system performances in the uniformly distributed DM link combined with MSSI are assessed as a function of the number of fiber spans, because the system performances in this configuration are used as the significant performance criterion in other link configurations, such as the artificial distribution or the random distribution of SMF lengths and RDPS.

• Journal of Korean Library and Information Science Society
• /
• 제45권3호
• /
• pp.5-36
• /
• 2014

The Web is rich with various sources of information that go beyond the contents of documents, such as hyperlinks and manually classified directories of Web documents such as Yahoo. This research extends past fusion IR studies, which have repeatedly shown that combining multiple sources of evidence (i.e. fusion) can improve retrieval performance, by investigating the effects of combining three distinct retrieval approaches for Web IR: the text-based approach that leverages document texts, the link-based approach that leverages hyperlinks, and the classification-based approach that leverages Yahoo categories. Retrieval results of text-, link-, and classification-based methods were combined using variations of the linear combination formula to produce fusion results, which were compared to individual retrieval results using traditional retrieval evaluation metrics. Fusion results were also examined to ascertain the significance of overlap (i.e. the number of systems that retrieve a document) in fusion. The analysis of results suggests that the solution spaces of text-, link-, and classification-based retrieval methods are diverse enough for fusion to be beneficial while revealing important characteristics of the fusion environment, such as effects of system parameters and relationship between overlap, document ranking and relevance.

• Journal of the Korean Society of Safety
• /
• 제21권3호
• /
• pp.16-21
• /
• 2006

This paper presents a knowledge-based electrical fire cause diagnosis system using the fuzzy reasoning. The cause diagnosis of electrical fires may be approached either by studying electric facilities or by investigating cause using precision instruments at the fire site. However, cause diagnosis methods for electrical fires haven't been systematized yet. The system focused on database(DB) construction and cause diagnosis can diagnose the causes of electrical fires easily and efficiently. The cause diagnosis system for the electrical fire was implemented with entity-relational DB systems using Access 2000, one of DB development tools. Visual Basic is used as a DB building tool. The inference to confirm fire causes is conducted on the knowledge-based by combined approach of a case-based and a rule-based reasoning. A case-based cause diagnosis is designed to match the newly occurred fire case with the past fire cases stored in a DB by a kind of pattern recognition. The rule-based cause diagnosis includes intelligent objects having fuzzy attributes and rules, and is used for handling knowledge about cause reasoning. A rule-based using a fuzzy reasoning has been adopted. To infer the results from fire signs, a fuzzy operation of Yager sum was adopted. The reasoning is conducted on the rule-based reasoning that a rule-based DB system built with many rules derived from the existing diagnosis methods and the expertise in fire investigation. The cause diagnosis system proposes the causes obtained from the diagnosis process and showed possibility of electrical fire causes.