• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.549-559
• /
• 2018

The dynamic behaviors of the bridge structures have great effects on the comfortability and safety of running high-speed trains, which can also reflect the structural degradation. This paper aims to reveal the characteristics of the dynamic behaviors induced by train loadings for a combined highway and railway bridge. Monitoring-based analysis of the acceleration and dynamic displacement of the bridge girder is carried out. The effects of train loadings on the vertical acceleration of the bridge girder are analyzed; the spatial variability of the train-induced lateral girder displacement is studied; and statistical analysis has been performed for the daily extreme values of the train-induced girder deflections. It is revealed that there are great time and spatial variabilities for the acceleration induced by train loadings for the combined highway and railway cable-stayed bridge. The daily extreme values of the train-induced girder deflections can be well fitted by the general extreme value distribution.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.549-559
• /
• 2017

As few multi-tower single-box multi-cell cable-stayed bridges with corrugated steel webs have been built, analysis is mostly achieved by combining single-girder model, beam grillage model and solid model in support of the design. However, such analysis methods usually suffer from major limitations in terms of the engineering applications: single-girder model fails to account for spatial effect such as shear lag effect of the box girder and the relevant effective girder width and eccentric load coefficient; owing to the approximation in the principle equivalence, the plane grillage model cannot accurately capture shear stress distribution and local stress state in both top and bottom flange of composite box girder; and solid model is difficult to be practically combined with the overall calculation. The usual effective width method fails to provide a uniform and accurate "effective length" (and the codes fail to provide a unified design approach at those circumstance) considering different shear lag effects resulting from dead load, prestress and cable tension in the construction. Therefore, a novel spatial grid model has been developed to account for shear lag effect. The theoretical principle of the proposed spatial grid model has been elaborated along with the relevant illustrations of modeling parameters of composite box girder with corrugated steel webs. Then typical transverse and longitudinal shear lag coefficient distribution pattern at the side-span and mid-span key cross sections have been analyzed and summarized to provide reference for similar bridges. The effectiveness and accuracy of spatial grid analysis methods has been finally validated through a practical cable-stayed bridge.

• 한국강구조학회 논문집
• /
• 제20권6호
• /
• pp.723-730
• /
• 2008

철도교량은 무거운 축하중이 작용하여 구조부재의 전체 강도에서 활하중이 차지하는 비율이 높기 때문에 피로에 의한 손상이 클 뿐만 아니라 계속적으로 변화하는 하중환경에 의해 피로손상이 빠르게 진행될 가능성이 있으므로 이에 대한 안전성을 체계적이고 분석적으로 평가할 수 있는 방법이 요구된다. 철도교량에서 구조부재별 피로균열의 생성위치 및 성장속도는 발생응력의 범위와 횟수, 구조시스템의 강성에 관련되어 있다. 구조시스템의 강성은 계획주체, 설계자, 시공자, 유지관리주체 각각의 특성과 불확실성을 포함하고 있으며, 시간의존적 하중과 저항의 특성에 의해서 추계학적으로 변화하게 된다. 그러므로 이러한 하중 및 저항에서의 각각의 불확실성을 정량적이고 객관적으로 표현할 수 있는 신뢰성에 기초한 평가기법을 개발하였다. 철도 및 지하철교량 등의 피로파괴에 대한 확률론적 평가를 위하여 응답면 기법(Response Surface Method, RSM)과 일계이차 모멘트 기법(First Order Second Moment method, FOSM)을 사용하여 피로균열진전과 잔존수명을 평가하였다. 응력변동 범위를 설계변수로 변화시키면서, 중요한 설계입력 변수로 한계상태 방정식을 구성하고 다양한 피로 수명(100년, 75년 등)후의 파괴확률을 예측하여 설계피로수명에 대한 신뢰성 지수계산 및 발생확률을 분석사례로 제시하였다.