• 제목/요약/키워드: combined gain

검색결과 398건 처리시간 0.026초

Generalized Analysis on the Combined Effect of SPM and Fiber Chromatic Dispersion on Subcarrier Multiplexed Optical Transmission Systems for RoF Applications

  • Kim, Kyoung-Soo;Lee, Jae-Hoon;Jeong, Ji-Chai
    • Journal of the Optical Society of Korea
    • /
    • 제15권2호
    • /
    • pp.132-139
    • /
    • 2011
  • We investigate theoretically the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) on multi-channel subcarrier multiplexed (SCM) optical transmission systems in terms of the detected RF carrier power and SPM-induced power gain after transmission over single-mode fiber (SMF) links. According to the calculated power gain due to the SPM effect at the transmission distance of P3dB using the detected radio-frequency (RF) carrier power after photo-detection, the power gain is significantly degraded with large optical modulation index (OMI), small SCM channel spacing, and large fiber launching power because of the increased interaction between subcarrier channels. The nonlinear phase shift due to linear and nonlinear fiber characteristics is investigated to explain these results in detail. The numerical simulation results show that the OMI per SCM channel has to be smaller than 10 % for the fiber launching power of 10 dBm to guarantee prevention of SPM-induced power gain degradation below 0.5 dB for the SCM system with the channel spacing of 100 MHz. This result is expected to be utilized for the optical transmission systems using the SCM technology in future radio-over-fiber (RoF) networks.

Neural Network Tuning of the 2-DOF PID Controller With a Combined 2-DOF Parameter For a Gas Turbine Generating Plant

  • Kim, Dong-Hwa
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제1권1호
    • /
    • pp.95-103
    • /
    • 2001
  • The purpose of Introducing a combined cycle with gas turbine in power plants is to reduce losses of energy, by effectively using exhaust gases from the gas turbine to produce additional electricity or process. The efficiency of a combined power plant with the gas turbine increases, exceeding 50%, while the efficiency of traditional steam turbine plants is approximately 35% to 40%. Up to the present time, the PID controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain without any experience, since the gain of the PID controller has to be manually tuned by trial and error procedures. This paper focuses on the neural network tuning of the 2-DOF PID controller with a combined 2-DOF parameter (NN-Tuning 2-DOF PID controller), for optimal control of the Gun-san gas turbine generating plant in Seoul, Korea. In order to attain optimal control, transfer function and operating data from start-up, running, and stop procedures of the Gun-san gas turbine have been acquired and a designed controller has been applied to this system. The results of the NN-Tuning 2-DOF PID are compared with the PID controller and the conventional 2-DOF PID controller tuned by the Ziegler-Nichols method through experimentation. The experimental results of the NN-Tuning 2-DOF PID controller represent a more satisfactory response than those of the previously-mentioned two controllers.

  • PDF

위성 S-대역 옴니 안테나 합성 이득 해석 (Combined Gain Analysis of Satellite S-band Omni-antenna)

  • 김중표;이상곤
    • 한국위성정보통신학회논문지
    • /
    • 제7권1호
    • /
    • pp.97-101
    • /
    • 2012
  • 위성의 발사부터 임무 궤도 운용을 포함한 어떤 위성의 자세에서도 지상국과의 통신 링크 보장을 위해서는 TC&R (Telemetry, Command & Ranging)의 안테나는 반구 옴니 패턴을 가져야 한다. 전구 옴니 안테나 패턴을 제공하기 위해서는 위성의 +z 축 방향과 -z축 방향에 각각 반구 옴니 패턴을 갖는 안테나를 배치하게 된다. 본 연구에서는 반구 옴니 빔을 갖는 RHCP 및 LHCP 편파 Quadrifilar 헬릭스 안테나를 설계하고 안테나 이득 및 축비 요구 규격을 잘 만족함을 확인하였다. +z 축 방향과 -z축 방향에 안테나 편파 조합에 따른 합성된 옴니 안테나 전구 패턴의 특성을 분석하기 위해 +z 및 -z 축에 4가지 편파 배치안에 대해 합성 빔을 비교 분석하였다. 이 결과를 바탕으로 실제 위성 구조물에 +z축 및 -z축에 RHCP 및 LHCP S-대역 옴니 안테나를 각각 장착하고 위성 구조물에 의한 합성 이득 패턴을 얻고 링크에 대한 영향 분석을 수행하였다.

An All-Optical Gain-Controlled Amplifier for Bidirectional Transmission

  • Choi, Bo-Hun;Hong, Kyung-Jin;Kim, Chang-Bong;Won, Yong-Hyub
    • ETRI Journal
    • /
    • 제28권1호
    • /
    • pp.1-8
    • /
    • 2006
  • A novel all-optical gain-controlled (AOGC) bidirectional amplifier is proposed and demonstrated in a compact structure. The AOGC function using fiber Bragg grating (FBG) pairs controls both directional signals independently, and combinations of optical interleavers and isolators suppress Rayleigh backscattering (RB) noise. The amplifier achieves high and constant gain with a wide dynamic input signal range and low noise figure. The performance does not depend on the input signal conditions, whether static-state or transient signals, or whether there is symmetric or asymmetric data traffic on bidirectional transmission. Transmission comparison experiments between invariable symmetrical and random variable asymmetric bidirectional data traffic verify that the all-optical gain control and bidirectional amplification functions are successfully combined into this proposed amplifier.

  • PDF

Inverted Pendulum 제어를 위한 새로운 하이브리드 퍼지게인스케쥴링 제어기의 설계

  • 정병태;박재삼
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 1997년도 춘계학술대회 발표논문집
    • /
    • pp.235-246
    • /
    • 1997
  • Hybrid fuzzy gain scheduling controller is composed of a PD control and a fuzzy control for taking the advantage of each scheme. The key structure of the hybrid fuzzy gain scheduling control scheme is so called a switch which calculates weighting values between the fuzzy controller and the PD controller. However, due to the requirement of the switch , the hybrid fuzzy gain scheduling control scheme needs extra fuzzy logic processing, thus the structure is complicated. and requires more calculation time. To eliminate the drawbacks, a new hybrid fuzzy gain scheduling control scheme is proposed in this paper. In the proposed scheme, the membership function, for calculating of weithting value, and the input and output membership functions are combined. Thus the proposed hybrid scheme does not require switch for calculation of weighting value, and as a result, the calculation time is faster and the structure is more simple than the existing hybrid controller. Computer simulation results for an inverted pendulum model under Pole-Placement PID controller, fuzzy gain scheduling controller,existing hybrid controller , and proposed hybrid controller are compared to demonstrate the good property of the proposed hybrid controller.

Design of the Shaped Offset Cassegrain Antenna System Combined with Corrugated Conical Feed Horn

  • 양두영
    • 전기전자학회논문지
    • /
    • 제3권1호
    • /
    • pp.1-10
    • /
    • 1999
  • In this paper, the design for the shaped offset cassegrain antenna system combined with corrugated feed horn is presented. First, spherical-mode wave theory is applied to the corrugated conical horn and its radiation patterns are investigated. Using the radiation patterns, design data of the corrugated conical horn are obtained by efficiency investigation of horn antenna. When the investigation is completed, the flare angle and length of the corrugated conical horn is determined. Next, the main and sub-reflector is designed using Snellis law and the conservation principle of energy. Then the uniform direction and energy density of the traveling wave at the aperture of the main-reflector is obtained. The maximum size of the main-reflector is determined by investigation of the illumination and spillover efficiency. Finally, the curvature of the main-reflector is modified to satisfy the condition of the uniform phase. From the calculated efficiencies, the designed site of the main-reflector and sub-reflector, system gain of the shaped offset cassegrain antenna has been obtained 40.5dB in Ka-band frequency. It has better characteristics than the result of SABOR with 39dB gain.

  • PDF

Amplitude Filter와 Phase Filter가 결합된 광학계의 결상특성

  • 박성종;이종진;정창섭
    • 한국광학회지
    • /
    • 제4권1호
    • /
    • pp.9-14
    • /
    • 1993
  • Amplitude filter와 phase filter가 결합된 CFAP(Combined Filter of Amplitude and Phase)의 결상 특성을 조사하기 위해 Bessel beam을 도입하였다. 이 논문에서는 무수차계와 수차를 포함하는 광학계에 대한 PSF와 encircled energy(E), transmission ratio(TR), gain(G)을 Bessel beam의 node수에 따라 계산하였다. 이 결과 Bessel beam은 amplitude filter와 다른 PSF 특성을 보였으며, 또한 구면수차가 포함된 경우 compensating effect가 크게 나타났다. 특히 Bessel beam의 central spot의 size가 Airy disk 반경보다 적게 나타나므로, 고집적 반도체 소자 제작에 이용가능하리라 생각된다.

  • PDF

Inclusion of Pangasiid Catfish in Polycultures of Major Indian Carps (Catla, Rohu and Mrigal) Increases Yield and Economic Gain

  • Sarkar, Reaz Uddin;Khan, Saleha;Haque, Mahfuzul;Khan, Mohammed Nurul Absar;Choi, Jae-Suk
    • Fisheries and Aquatic Sciences
    • /
    • 제11권1호
    • /
    • pp.23-31
    • /
    • 2008
  • An experiment was conducted in twelve 0.02-ha rain-fed earthen ponds for 18 weeks to evaluate the effects of including pangasiid catfish (Pangasius hypophthalmus) in polycultures of major Indian carps, catla (Catla catla), rohu (Labeo rohita), and mrigal (Cirrhinus cirrhosus), on yield and economic gain. Treatment 1 ($T_1$) consisted of 5,000 catla+2,500 rohu+2,500 mrigal per ha, treatment 2 ($T_2$) consisted of 5,000 catla+2,500 rohu+2,500 mrigal+2,500 pangasiid catfish per ha, treatment 3 ($T_3$) consisted of 5,000 catla+2,500 rohu+2,500 mrigal+5,000 pangasiid catfish per ha, and treatment 4 ($T_4$) consisted of 5,000 catla+2,500 rohu+2,500 mrigal+7,500 pangasiid catfish per ha. The growth performance of fishes was evaluated by calculating specific growth rate, daily weight gain, and percent weight gain. Inclusion of pangasiid catfish in the carp polyculture resulted in significant increases in the growth and yield of catla and rohu. Catla and rohu grew most in $T_4$, with 7,500/ha of pangasiid catfish. The presence of pangasiid catfish did not influence the growth of mrigal. The growth of pangasiid catfish varied with stocking density, and they grew best at 5,000/ha ($T_3$). The carp and the combined fish yields were significantly higher in the carp polycultures with pangasiid catfish than with carps alone. The total carp and the combined fish yields were highest in $T_4$, in which the density of pangasiid catfish was greatest. However, the total carp and the combined fish yields in $T_3$ and $T_4$ were not significantly different. Profit differed significantly among treatments. Economic gain was highest in $T_3$, with 5,000/ha of pangasiid catfish, and lowest in $T_1$. The inclusion of pangasiid catfish in major carp polycultures results in higher fish yields and greater economic gain.

와이어로 구동하는 적층형 다관절 구조를 지닌 수술 로봇의 구동 속도를 고려한 기구학적 제어기의 게인 최적화 (Gain Optimization of Kinematic Control for Wire-driven Surgical Robot with Layered Joint Structure Considering Actuation Velocity Bound)

  • 진상록;한석영
    • 로봇학회논문지
    • /
    • 제15권3호
    • /
    • pp.212-220
    • /
    • 2020
  • This paper deals with a strategy of gain optimization for the kinematic control algorithm of a wire-driven surgical robot. The proposed controller consists of the closed-loop inverse kinematics with the back-calculation method. The closed-loop inverse kinematics has 18 PID control gains, and the back-calculation method has 6 gains. An efficient strategy is designed to optimize 18 values first and then the remaining 6 values. The optimal gain sets are searched under the step input with performance indices. In this gain optimization, the objective function is defined as the minimum value of signal-to-noise ratio of the performance indices for 6 DoF (Degree-of-Freedom) motion that is based on the Taguchi method, and the constraints are applied to obtain stable responses for each motion evenly. The gain sets obtained are verified by simulations using the test trajectories. In comparative results, the optimal gain value based on the performance index combined with ISE (integral of square error) and settling time showed the best control performance.

Analysis and Design of Function Decoupling High Voltage Gain DC/DC Converter

  • Wei, Yuqi;Luo, Quanming;Lv, Xingyu;Sun, Pengju;Du, Xiong
    • Journal of Power Electronics
    • /
    • 제19권2호
    • /
    • pp.380-393
    • /
    • 2019
  • Traditional boost converters have difficulty realizing high efficiency and high voltage gain conversion due to 1) extremely large duty cycles, 2) high voltage and current stresses on devices, and 3) low conversion efficiency. Therefore, a function decoupling high voltage gain DC/DC converter composed of a DC transformer (DCX) and an auxiliary converter is proposed. The role of DCX is to realize fixed gain conversion with high efficiency, whereas the role of the auxiliary converter is to regulate the output voltage. In this study, different forms of combined high voltage gain converters are compared and analyzed, and a structure is selected for the function decoupling high voltage gain converter. Then, topologies and control strategies for the DCX and auxiliary converter are discussed. On the basis of the discussion, an optimal design method for circuit parameters is proposed, and design procedures for the DCX are described in detail. Finally, a 400 W experimental prototype based on the proposed optimal design method is built to verify the accuracy of the theoretical analysis. The measured maximum conversion efficiency at rated power is 95.56%.