• Journal of Welding and Joining
• /
• 제11권1호
• /
• pp.62-72
• /
• 1993

Recently there is an increased interest in joining of ceramics to metals and brazing now an accepted method of joining for a wide variety of ceramic to metal combination. The present research work is aimed at establishing the basis of the metal-ceramic joining of $Al_{2}$O$_{3}$ to STS 304 with using Cu-7.5wt% Zr insert metals. Also the microstructures of the brazed joints were observed by using optical microscope and SEM and the reaction products were analyzed by using EDX, WDX and XRD. As a result, the following findings were obtained. The reaction layers of the brazed joints of $Al_{2}$O$_{3}$ to STS 304 are composed of four layers at the bonded interlayer. Double reaction layers are formed at the interface of $Al_{2}$O$_{3}$ insert metal. Layer I was composed of ZrO$_{2}$ particles, Fe-Cr-Ni compounds in Cu matrix, while layer II ZrO$_{2}$ band phase containing Fe-Cr-Ni compounds.

• Structural Engineering and Mechanics
• /
• 제29권1호
• /
• pp.17-35
• /
• 2008

Neglecting the real joint behaviour in frame analysis may result in unrealistic predictions of the response and reliability of steel frames. The reliability of the prediction of main joint properties according to the component method (Eurocode 3-Part 1.8) still remains open to further investigation. The first step toward the solution is to compare the theoretical expressions given in EN 1993-1-8 and the experimental results. With that goal in mind six nominally the same, but really different specimens of welded beam-to-column joints subjected to static load were tested. The specimens present a combination of nominally identical structural elements produced in different European mills. This paper provides these tests, as well as their detailed evaulation and interpretation. All three joint structural properties (rotational stiffness, moment resistance and rotation capacity) have been considered. Four models for determining the plastic resistance out of experimental Mj-${\phi}$ curves have been applied. The results that have been discussed in detail, point to the fact that EN 1993-1-8 underestimates the real structural properties of the tested type of joint, as well as to the conclusion that detailed research of this problem needs to be conducted using the probabilistic reliability methods.

• 대한건축학회논문집:구조계
• /
• 제35권8호
• /
• pp.123-130
• /
• 2019

Recently, it is required to develop a monitoring technology that combines an FBG sensor as a means for continuously monitoring whether reinforcing effect of FRP is maintained on FRP reinforced structural members. However, most existing researches focus on the insertion of FBG sensors into bar-shaped FRPs, and there is insufficient study on the details strip-type FRPs combined with FBG sensors. Therefore, in this paper, it is studied to develop a reinforcement in which a FBG sensor is combined with a FRP strip. Especially, combination of FRP and FBG sensor. For this, a series of experiments were performed to find the adhesive strength of fiber-FRP-epoxy joints, the tensile strength of FBG sensor part with reflection-lattice, and the performance depending on the connection method of FRF and FBG sensor. As a result of the study, it was found that a minimum strength of $216.15N/mm^2$ is required for incorporating FBG sensors in FRP using epoxy. It is considered that the adhesion length of epoxy joints should be more than 50mm. When the FBG sensor is attached to the FRP strip as an epoxy, it is considered appropriate to use the complete attachment and the sensor non-attachment method.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.59-67
• /
• 2016

The automotive manufactures increase their use of lightweight materials to improve fuel economy and energy usage has a significant influence on the choice of developing materials. To meet this requirements manufacturers are replacing individual body parts with lightweight metals, for these the process treating and painting surfaces is changing. The pre-coated steels are newly developed to avoid the conventional complex and non-environmental painting process in the body-in-white car manufacturing. The development of new joining techniques is critically needed for pre-coated steel sheets, which are electrically non-conductive materials. In the present study, dissimilar combination of pre-coated steel and galvanized steel sheets were joined by the self-piercing rivet, adhesive bonding and hybrid joining techniques. The tensile shear test and free falling high speed crash test were conducted to evaluate the mechanical properties of the joints. The highest tensile peak load with large deformation was observed for the hybrid joining process which has attained 48% higher than the self-piercing rivet. Moreover, the hybrid and adhesive joints were observed better strain energy compared to self-piercing rivet. The fractography analyses were revealed that the mixed mode of cohesive and interfacial fracture for both the hybrid and adhesive bonding joints.

• 한국강구조학회 논문집
• /
• 제28권6호
• /
• pp.459-465
• /
• 2016

본 연구에서는 인장이음에 대한 반복하중의 영향을 파악하기 위하여 단순 인장이음을 대상으로 피로시험을 수행하였다. 인장이음의 볼트체결에 따른 축력과 작용하중에 의한 축력의 변화를 측정하였고 반복하중에 의한 볼트의 축력과 파괴양상, 이음의 피로강도를 조사하였다. 인장이음의 구조 상세 변수는 플랜지 두께와 고장력 볼트의 직경으로서 이들의 조합에 따라 볼트와 연결부의 강성이 달라지도록 하였다. 피로시험결과, 반복하중을 받는 인장이음의 파괴모드는 EC3에서 제시하고 있는 정적 파괴모드별 극한하중을 이용하여 평가될 수 있었다. 인장이음의 피로강도는 지레작용을 고려하지 않은 EC3(36)의 피로강도보다 상당히 안전측의 결과로 나타났다. 그러나, 지레작용에 의한 부가축력은 볼트 축력의 증가를 일으키기 때문에 피로강도에 대한 신중한 평가가 필요하다.

• Composites Research
• /
• 제22권2호
• /
• pp.7-13
• /
• 2009

복합재료가 항공기 구조물 및 기계 부품 등에 폭 넓게 적용됨에 따라, 복합재료 구조들에서 가장 취약한 복합재료 체결부의 설계는 매우 중요한 연구분야로 대두되긴 있다. 본 논문에서는 접착 체결구조와 기계적 체결구조의 조합으로 되어 있는 하이브리드 조인트의 파손강도를 평가하고 예측하였다. 피착제의 두께, w/d, e/d가 서로 다른 10가지 하이브리드 조인트 시험편을 제작하여 평가하였다. 접착 체결구조와 기계적 체결구조의 파손 판정을 위해 파손영역법과 파괴면적지수법이 각각 적용 되었으며, 두 체결부위 중 어느 한족이 먼저 파손기준에 도달할 경우, 하이브리드 조인트가 파손되었다고 가정하였다. 이상의 실험과 해석결과로부터, 하이브리드 조인트 시편의 파손강도는 25.5%, 오차 범위 내에서 예측할 수 있었다.

• 한국임상수의학회지
• /
• 제29권1호
• /
• pp.82-86
• /
• 2012

5년령 중성화된 수컷 치와와가 수개월간의 오른쪽 후지 파행 증상으로 내원하였다. 신체 검사에서 통증을 동반한 4등급의 슬개골 내측 탈구를 확인 하였고 오른쪽 왼쪽 후지 파행등급 2 와 0을 각각 확인 하였다. 일반 방사선 사진에서 골증식체와 연골하 병변을 확인 하였고 오른쪽과 왼쪽 후지 골관절증 점수 20 과 12를 각각 확인하였다. 슬개골 탈구 정복술과 자가지방 유래 줄기세포 치료를 보호자의 동의 하에 결정 하였다. $1{\times}10^6$ 개의 줄기세포를 PBS, 인공 괄절액과 함께 슬개골 탈구 정복술 후에 주입 하였다. 주입 후 19개월에 오른쪽 왼쪽 후지 파행등급 0 와 0, 골관절증 점수 19 와 13을 각각 확인 하였고, 5년후에 파행등급 0 와 0, 골관절증 점수 14 와 15를 각각 확인 하였다. 본 증례를 통해 자가지방 유래 줄기 세포치료를 받은 관절에서 골관절증이 감소 된 것을 확인 할 수 있었다.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.64-72
• /
• 2011

The spot weldability of dissimilar metal joints between austenitic stainless steels (STS316)/IF steels and ferritic stainless steels (STS430)/IF steels was investigated. This study was aimed to determine the spot welding parameters for a dissimilar metal joint and to evaluate the dissimilar metal joint's weldability, including its welding nugget shape, tensile-shear strength, hardness, and microstructure. The comparison of these results was described in terms of fracture behavior. Compared with the weld lobe of similar metal joints, dissimilar metal joints (STS430/IF) had reduced weld current range. However, the weld lobe of STS316/IF steel joint showed increased weld current range. This is because the dilution of chemical composition in the molten weld pool suppressed the heat input being caused by Joule heat with current flow through the samples. The microstructure of the fusion zone was fully martensite and mixture of ferrite and martensite for austenitic stainless steel/IF steel and ferritic stainless steel/IF steel combination, respectively. The experimental results showed that the shape of nugget was asymmetric, in which the fusion zone of the austenitic and ferritic stainless steel sheet was larger due to the higher bulk-resistance. The predicted microstructure by using the Schaeffler diagram was well matched with experimental results. After peel test, the fracture was initiated from heat affected zone of ferritic stainless steel sheet side, however the final fracture was propagated into the IF steel sheet side due to its lower strength.

• PNF and Movement
• /
• 제19권1호
• /
• pp.43-55
• /
• 2021

Purpose: The purpose of this study was to determine the effects of contract relaxation and a combination of isotonics in proprioceptive neuromucular facilitation (PNF) on hip and lumbopelvic motions of male patients with chronic low back pain. Methods: As the subjects of this study, a total of 45 male patients with chronic low back pain were divided into groups: 15 who underwent contract relaxation (CR) of the PNF of their hip joints, 15 who underwent a combination of isotonics (CI) of the PNF, and 15 who underwent both techniques. A device for analyzing three-dimensional motion was used to measure hip medial rotation angles, lumbopelvic rotation angles, and hip medial rotation angles at the start of lumbopelvic rotation during hip medial rotation. A two-way repeated measures ANOVA was used to compare the average values. Results: There were interactions in the hip medial rotation angles, lumbopelvic rotation angles and hip medial rotation angles at the start of lumbopelvic rotation based on the methods and periods of exercise (p < 0.05). The CR and the CR+CI groups displayed more increased hip medial angles when compared to the CI group. The CR+CI group had more decreased lumbopelvic rotation angles when compared to the CR and the CI groups. The CR+CI group had more increased hip medial rotation angles at the start of lumbopelvic rotation when compared to the CR and the CI groups. Conclusion: It can be concluded that the combination of stretching and stability exercises was effective in male patients with chronic low back pain who showed limited hip medial rotation.

• Journal of Acupuncture Research
• /
• 제26권6호
• /
• pp.121-132
• /
• 2009

Objectives : To evaluate the current status of East-West combination treatment in joint disorders. Methods : The medical records of patients who visited the Joints & Rheumatism Center at the Kyung Hee East-West Neo Medical Center from April 2006 to June 2009 were evaluated. The general characteristics of patients who underwent combination treatment, trend in number of cross-system referrals, and disorders and involved body regions of patients referred to the Eastern medical hospital from the Western medical hospital were initially assessed. 6 major disorders were found from the initial scanning. The trend in number of cross-hospital referrals, number of visits to the Eastern medical hospital, current status of combination treatment, treatment modality, and reason for cross-system referral was evaluated. Results : 1. 1510 patients were referred from the Eastern medical hospital to the Western medical hospital, and 1065 patients were referred from the Western medical hospital to the Eastern medical hospital. First visit patients reached a peak at the second quarter of 2007 and fourth quarter of 2006 respectively, and have steadily decreased from then on. Referrals of female patients were twice as common as male patient referrals. Patients in their sixth or seventh decade of life were most commonly referred, and more outpatients were referred compared to inpatients. 2. Patients with knee joint disorders were most commonly referred from the Western medical hospital to the Eastern medical hospital, followed by hip, shoulder, ankle, wrist, and elbow joint disorders. The most common disorders for each of the above regions in referred patients were knee osteoarthritis, avascular necrosis of the hip, adhesive capsulitis, and ankle strain and sprain. The generalized disorders rheumatoid arthritis and ankylosing spondylitis followed. 3. Patients referred to the Eastern hospital received approximately 3 to 10 Eastern medical treatment sessions. 45 percent remained on constant combination treatment, and 98 percent of referred patients received acupuncture treatment. Conclusions : In regard to the number of patients and duration of combination treatment, combination treatment was successfully performed for knee osteoarthritis, rheumatoid arthritis, and ankylosing spondylitis, while it was not so for avascular necrosis of the hip, adhesive capsulitis, and ankle strain and sprain. Further research on this subject is required.